Always On VPN and Windows Server 2019 NPS Bug

Note: This post updated March 19,2019 to reflect new workaround configuration guidance.

When deploying a Windows Server 2019 Network Policy Server (NPS) to support a Windows 10 Always On VPN implementation, administrators may encounter the following error when attempting to establish a VPN connection on a remote Windows 10 client.

Can’t connect to [connection name].

The connection was prevented because of a policy configured on your RAS/VPN server. Specifically, the authentication method used by the server to verify your username and password may not match the authentication method configured in your connection profile. Please contact the Administrator of the RAS server and notify them of this error.

Always On VPN and Windows Server 2019 Network Policy Server Bug
In addition, an event ID 20227 from the RasClient will be recorded in the application event log with the following error message.

The user [username] dialed a connection named [connection name] which has failed. The error code returned on failure is 812.

Always On VPN and Windows Server 2019 Network Policy Server Bug

Common Causes

Always On VPN error code 812 indicates an authentication policy mismatch between the client and the server. This often occurs when, for example, the server is configured to use Protected Extensible Authentication Protocol (PEAP), but the client is configured to use Microsoft CHAP Version 2 (MS-CHAP v2).

Troubleshooting

Carefully review the authentication policy on both the client and server to ensure they match. Next, enable firewall logging on the NPS server to log both allowed and dropped packets. Attempt another VPN connection and observe the firewall logs. In this example the firewall is dropping packets inbound on UDP port 1812.

Always On VPN and Windows Server 2019 Network Policy Server Bug

Interestingly, the default Windows firewall rule allowing inbound UDP port 1812 is enabled and set to allow for all profiles.

Always On VPN and Windows Server 2019 Network Policy Server Bug

Windows Server 2019 Bug

It appears that Microsoft’s recently released Windows Server 2019 has a bug that prevents NPS from working correctly out of the box. Specifically, it looks like the default Windows firewall rules to allow inbound UDP port 1812 (RADIUS authentication) and inbound UDP port 1813 (RADIUS accounting) do not work.

Resolution

To resolve this issue, open an elevated command window and enter the following command.

sc sidtype IAS unrestricted

Once complete, restart the server and the default Windows Firewall rules for NPS traffic will work correctly.

Additional Information

Windows 10 Always On VPN NPS Load Balancing Strategies

Leave a comment

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: