Device Tunnel Configuration
Guidance for creating and deploying a device tunnel connection can be found here. It’s important to note that the device tunnel is always on by default. Also, there can only be a single device tunnel configured per device. You must remove an existing device tunnel before configuring a new one.
Known Issues
After configuring a Windows 10 Always On VPN device tunnel the administrator may notice two anomalies. First, the device tunnel is missing in the Windows UI after it is created. Second, viewing the status of the device tunnel connection using PowerShell indicates the connection is “disconnected” even though it is connected.
Device Tunnel Missing
As you can see below, event though both a device and user tunnel have been provisioned, the Windows UI reports only a single Always On VPN connection, that being the user connection.
However, the device tunnel does appear in the Network Connections control panel applet (ncpa.cpl), as shown here.
This is expected and by design. The device tunnel is not displayed to the user in the Windows UI as it is provisioned to the machine, not the user. It appears on the Control Panel because the applet is capable of enumerating both user and system connections.
Device Tunnel Disconnected
The status of the Windows 10 Always On VPN device tunnel connection can be viewed by running the Get-VpnConnection -AllUserConnection PowerShell command. However, at the time of this writing, PowerShell always reports the connection status as “Disconnected”. This appears to be a bug; one which Microsoft is hopefully working to address.
Summary
The Windows 10 Always On VPN device tunnel option allows administrators to enable scenarios previously supported with DirectAccess, including logging on without cached credentials and unattended remote support. Not all deployments require a device tunnel, but it is an important option available to administrators to address specific use cases.
Additional Information
Windows 10 Always On VPN Device Tunnel Configuration using PowerShell
Windows 10 Always On VPN RasMan Device Tunnel Failure
Deleting a Windows 10 Always On VPN Device Tunnel