For DirectAccess manage out scenarios, it is necessary to configure the Windows firewall on the DirectAccess client to allow any required inbound communication from the corporate network. For example, if management hosts on the internal network need to initiate Remote Desktop sessions with remote connected DirectAccess clients, the Remote Desktop – User Mode (TCP-In) Windows firewall rule will need to be enabled for the Public and Private profiles.
While enabling this rule will allow remote desktop connections to be made from the corporate network, its default configuration will also accept remote desktop connections from any network. From a security perspective this is not desirable.
A better solution is to restrict access to connections originating only from the corporate network. To do this it will be necessary to identify the ISATAP prefix used internally. To determine the corporate ISATAP prefix, run the ipconfig command on a management workstation that is configured for ISATAP. The ISATAP prefix will be the first 96 bits of the IPv6 address assigned to the ISATAP tunnel adapter (essentially everything with the exception of the embedded IPv4 address).
On the DirectAccess client, right-click the firewall rule and choose Properties. Choose the Scope tab and then select These IP addresses . Click Add and then enter the ISATAP prefix as shown here.
Once the firewall rule is configured to restrict access to the ISATAP prefix, only corporate management workstations on the internal network will have access to remote DirectAccess clients.
