Troubleshooting DirectAccess IP-HTTPS Error Code 0x90320

A Windows 7 or Windows 8.x/10 client may fail to establish a DirectAccess connection using the IP-HTTPS IPv6 transition technology. When troubleshooting this issue, running ipconfig.exe shows that the media state for the tunnel adapter iphttpsinterface is Media disconnected.

Troubleshooting DirectAccess IP-HTTPS Error Code 0x90320

Running the Get-NetIPHttpsState PowerShell command on Windows 8.x/10 clients or the netsh interface httpstunnel show interface command on Windows 7 clients returns an error code of 0x90320, with an interface status Failed to connect to the IPHTTPS server; waiting to reconnect.

Troubleshooting DirectAccess IP-HTTPS Error Code 0x90320

Error code 0x90320 translates to SEC_I_INCOMPLETE_CREDENTIALS, indicating the client was unable to authenticate to the DirectAccess server during the TLS handshake when establishing the IP-HTTPS IPv6 transition tunnel. This occurs when the DirectAccess server or an Application Delivery Controller (ADC) is configured to perform client certificate authentication for IP-HTTPS connections. The client may fail to authenticate if it does not have a valid certificate issued by the organization’s internal certification authority (CA) or if the DirectAccess server or ADC is configured to perform IP-HTTPS client authentication incorrectly.

To resolve this issue, ensure that a valid certificate is installed on the DirectAccess client. In addition, ensure that the DirectAccess server or ADC is configured to use the correct CA when authenticating clients establishing IP-HTTPS connections.

Additional Information

DirectAccess IP-HTTPS Preauthentication 

DirectAccess IP-HTTPS Preauthentication using Citrix NetScaler

DirectAccess SSL Offload and IP-HTTPS preauthentication using Citrix NetScaler 

DirectAccess IP-HTTPS preauthentication using F5 BIG-IP 

SSL Certificate Considerations for DirectAccess IP-HTTPS 

DirectAccess IP-HTTPS Preauthentication using F5 BIG-IP

Note: For information about configuring the Citrix NetScaler to perform IP-HTTPS preauthentication, click here. For information about configuring Windows Server 2012 R2 to perform IP-HTTPS preauthentication natively, click here.

Introduction

DirectAccess IP-HTTPS Preauthentication using F5 BIG-IPRecently I wrote about security challenges with DirectAccess and the IP-HTTPS IPv6 transition technology. Specifically, IP-HTTPS transition tunnel connections are not authenticated by the DirectAccess server, only the client. This allows an unauthorized device to obtain an IPv6 address on the DirectAccess client network. With it, an attacker can perform network reconnaissance using ICMPv6 and potentially launch a variety of Denial-of-Service (DoS) attacks. For more details, click here.

Note: DirectAccess IPsec data connections not at risk. Data is never exposed at any time with the default configuration.

Mitigation

To mitigate these issues, it is recommended that an Application Delivery Controller (ADC) be used to terminate SSL connections and enforce client certificate authentication. Doing this will ensure that only authorized connections will be accepted by the DirectAccess server. In addition, there are some scalability and performance benefits to implementing this configuration when supporting Windows 7 clients.

Important Considerations

Performing IP-HTTPS preauthentication on the F5 BIG-IP is formally unsupported by Microsoft. In addition, terminating IP-HTTPS on the F5 appliance breaks OTP authentication.

F5 BIG-IP Configuration

To configure the F5 BIG-IP to perform SSL offload for DirectAccess IP-HTTPS, follow the guidance documented here. In addition, to configure the F5 BIG-IP to perform preauthentication for DirectAccess clients, when creating the client SSL profile, click Custom above the Client Authentication section and choose Require from the Client Certificate drop-down list and Always from the Frequency drop-down list. In addition, choose your internal PKI’s root Certification Authority (CA) certificate from the Trusted Certificate Authorities drop-down list and from the Advertised Certificate Authorities drop-down list.

DirectAccess IP-HTTPS Preauthentication using F5 BIG-IP

Summary

Enabling client certificate authentication for IP-HTTPS connections ensures that only authorized DirectAccess clients can establish a connection to the DirectAccess server and obtain an IPv6 address. It also prevents an unauthorized user from performing network reconnaissance or launching IPv6 Denial-of-Service (DoS) attacks.

%d bloggers like this: