DirectAccess IP-HTTPS Preauthentication


Introduction

DirectAccess IP-HTTPS PreauthenticationRecently I’ve written about the security challenges with DirectAccess, specifically around the use of the IP-HTTPS IPv6 transition technology. In its default configuration, the DirectAccess server does not authenticate the client when an IP-HTTPS transition tunnel is established. This opens up the possibility of an unauthorized user launching Denial-of-Service (DoS) attacks and potentially performing network reconnaissance using ICMPv6. More details on this can be found here.

Mitigation

The best way to mitigate these security risks is to implement an Application Delivery Controller (ADC) such as the F5 BIG-IP Local Traffic Manager or the Citrix NetScaler. I’ve documented how to configure those platforms here and here.

No ADC?

For those organizations that do not have a capable ADC deployed, it is possible to configure the IP-HTTPS listener on the Windows Server 2012 R2 server itself to perform preauthentication.

Important Note: Making the following changes on the DirectAccess server is not formally supported. Also, this change is incompatible with one-time passwords (OTP)  and should not be performed if strong user authentication is enabled. In addition, null cipher suites will be disabled, resulting in reduced scalability and degraded performance for Windows 8.x and Windows 10 clients. Making this change should only be done if a suitable ADC is not available.

Configure IP-HTTPS Preauthentication

To configure the DirectAccess server to perform preauthentication for IP-HTTPS connections, open an elevated PowerShell command window and enter the following command.

ls Cert:\LocalMachine\My

DirectAccess IP-HTTPS Preauthentication

Copy the thumbprint that belongs to the SSL certificate assigned to the IP-HTTPS listener. Open an elevated command prompt window (not a PowerShell window!) and enter the following commands.

netsh http delete sslcert ipport=0.0.0.0:443
netsh http add sslcert ipport=0.0.0.0:443 certhash=[thumbprint]
appid={5d8e2743-ef20-4d38-8751-7e400f200e65}
dsmapperusage=enable clientcertnegotiation=enable

DirectAccess IP-HTTPS Preauthentication

For load-balanced clusters and multisite deployments, repeat these steps on each DirectAccess server in the cluster and/or enterprise.

Summary

Once these changes have been made, only DirectAccess clients that have a computer certificate with a subject name that matches the name of its computer account in Active Directory will be allowed to establish an IP-HTTPS transition tunnel connection.