Microsoft recently announced support for native Windows 10 Always On VPN device tunnel configuration in Intune. Previously administrators had to use the complicated and error-prone custom XML configuration to deploy the Windows 10 Always On VPN device tunnel to their clients. That is no longer required with this recent Intune update. In addition, administrators may now specify custom cryptography settings for IPsec Security Association (SA) parameters for IKEv2 for both device tunnel and user tunnel connections. This effectively eliminates the requirement to use custom ProfileXML for most deployment scenarios.
Device Tunnel Configuration in Intune
Follow the steps below to configure and deploy a Windows 10 Always On VPN device tunnel using the native Intune user interface.
Create Profile
1. Open the Microsoft Endpoint Manager admin center (devicemanagement.microsoft.com).
2. Navigate to Devices > Configuration Policies.
3. Click Create profile.
4. Choose Windows 10 and later from the Platform drop-down list.
5. Choose VPN from the Profile drop-down list.
6. Click Create.
Profile Settings
Proceed with the profile configuration as you would normally, providing the VPN connection name, VPN server name(s), and choosing the option to register IP addresses with internal DNS. Next use the following steps to define a device tunnel connection and specify custom cryptography for IPsec SA parameters for IKEv2.
Configure a Device Tunnel
1. Select IKEv2 from the Connection type drop-down list.
2. Click Enable in the Always On section.
3. Select Machine Certificates from the Authentication method section.
4. If the computer certificate is provisioned using Intune, select the client authentication certificate (not required if the computer certificate is provisioned using on-premises Active Directory).
5. Click Enable in the Device Tunnel section.
Define Custom Cryptography
Follow the steps below to implement minimum security baseline cryptography settings for IKEv2.
IKE Security Association Parameters
1. Select AES-128 from the Encryption algorithm drop-down list.
2. Select SHA2-256 from the Integrity check algorithm drop-down list.
3. Select 14 from the Diffie-Hellman group drop-down list.
Child Security Association Parameters
1. Select CBC-AES-128 from the Cipher transform algorithm drop-down list.
2. Select HMAC-SHA256-128 from the Authentication transform algorithm drop-down list.
3. Select 14 from the Perfect forward secrecy (pfs) group drop-down list.
Important Note: The IPsec security association parameters outlined above are the minimum recommend security baseline for IKEv2 and are compatible with all supported versions of Windows Server RRAS. It is recommended that authenticated cipher suites (GCM) be used whenever possible. However, GCM ciphers are not supported for encryption prior to Window Server 1803. Administrators should review these security settings and adjust the parameters to meet their specific security requirements.
Server Configuration
When defining custom cryptography settings for IKEv2 for device tunnel deployment, it is critical that the server be configured using identical parameters. Failure to use matching cryptography settings on the client and server will result in error code 13868, which indicates an IPsec policy mismatch.
A PowerShell script to configure IKEv2 security association parameter minimum security baselines on the RRAS server as outlined above can be found here. The commands to make these changes on the Azure VPN gateway can be found in this post.
Caveats
While Microsoft has made great strides to ensure better support for Always On VPN configuration using the native Intune UI, there are a few critical settings are still not supported. In these scenarios the administrator must deploy Always On VPN using custom XML, as described here and here.
Custom Cryptography
IKEv2 custom cryptography settings are only exposed when IKEv2 is selected as the connection type. It appears that defining custom cryptography settings for IKEv2 when the connection type is set to Automatic is not supported at this time. If you wish to specify the Automatic connection type and use custom cryptography settings for IKEv2 you will need to deploy the device tunnel using custom ProfileXML.
IPv6
IPv6 routing when configuring split tunneling for Always On VPN in Intune is not supported.
Additional Information
Windows 10 Always On VPN Policy Mismatch Error
Windows 10 Always On VPN Device Tunnel with Azure VPN Gateway
Windows 10 Always On VPN IKEv2 Load Balancing and NAT
Windows 10 Always On VPN IKEv2 Fragmentation
Windows 10 Always On VPN IKEv2 Security Configuration
Like this:
Like Loading...
Likely the single most common complaint about Windows 10 Always On VPN is that device tunnel or user tunnel VPN connections fail to reconnect automatically after a laptop computer wakes from sleep or hibernate. You will find many complaining about this issue and discussing various attempts at resolution on the Microsoft forums. And while Microsoft has released many fixes the last few years to improve connection reliability for Always On VPN, this one seems to continue to plague them. This issue is also prevalent with DirectAccess deployments.
While performing Always On VPN evaluation testing with the latest release of Windows 10 (2004), a bug was discovered that may result in failed VPN connections, but only under certain conditions. Specifically, the failure occurs when both the device tunnel and user tunnel are configured on the same client, and the user tunnel is configured to use IKEv2 exclusively.
