Always On VPN Updates for Windows 10 2004

Always On VPN Updates for Windows 10 2004Microsoft recently made available an update for Windows 10 2004 that includes many important fixes for outstanding issues with Windows 10 Always On VPN. KB4571744 (build 19041.488) addresses many challenges faced by Always On VPN administrators today, including the following.

TPM

This update addresses an issue that prevents hash signing from working correctly using the Microsoft Platform Crypto Provider for Trusted Platform Module (TPM). This issue can occur when administrators configure Always On VPN to use Protected Extensible Authentication Protocol (PEAP) with client certificate authentication using a FortiGate security device.

Sleep/Hibernate

This update also addresses issues with Windows 10 Always On VPN failing to automatically reconnect when resuming from sleep or hibernate. I’ve written about issues with Always On VPN and sleep/hibernate in the past. This is an issue that has plagued Always On VPN since its introduction, so let’s hope this finally provides some meaningful relief from this persistent problem.

Certificate Authentication

When both the Always On VPN device tunnel and user tunnel are provisioned to a Windows 10 clients, user tunnel connections may be authenticated using the machine certificate and not EAP/PEAP. This can result in connections that are not validated as intended, and allowing a user to bypass configured NPS policies, MFA requirements, or conditional access rules. This update includes a fix for this issue, restoring proper authentication for the user tunnel when the device tunnel is also provisioned.

Device and User Tunnel Coexistence

A bug that first appeared when Windows 10 2004 was introduced prevented a device tunnel and user tunnel Always On VPN connection from being established to the same VPN server if the user tunnel used Internet Key Exchange Version 2 (IKEv2). This update restores full functionality under those conditions.

Update KB4571744

To resolve these issues with Windows 10 Always On VPN as well as others, download and install update KB4571744 today. If you are experiencing any of these issues with releases of Windows 10 prior to 2004, look for updates for those build to come later this year.

Additional Information

September 3, 2020 – KB4571744 (OS Build 19041.488) Preview

Windows 10 Always On VPN Connection Issues after Sleep or Hibernate

Windows 10 Always On VPN Bug in Windows 10 2004

Always On VPN Connection Issues After Sleep or Hibernate

Always On VPN Connection Issues After Sleep or HibernateLikely the single most common complaint about Windows 10 Always On VPN is that device tunnel or user tunnel VPN connections fail to reconnect automatically after a laptop computer wakes from sleep or hibernate. You will find many complaining about this issue and discussing various attempts at resolution on the Microsoft forums. And while Microsoft has released many fixes the last few years to improve connection reliability for Always On VPN, this one seems to continue to plague them. This issue is also prevalent with DirectAccess deployments.

Fix or Workaround?

Unfortunately, I do not have a specific fix or workaround to share that will magically resolve this ongoing issue. However, there are a few group policy settings that may prove effective in some cases.

Connected Standby Settings

To help address issues with Always On VPN connections failing after sleep or hibernate, open the group policy management console and navigate to Computer Configuration > Administrative Templates > System > Power Management > Sleep Settings and enable the following settings.

  • Allow network connectivity during connected-standby (plugged in)
  • Allow network connectivity during connected-standby (on battery)

Always On VPN Connection Issues After Sleep or Hibernate

Always On VPN Connection Issues After Sleep or Hibernate

Additional Information

Are you experiencing issues with Always On VPN reconnecting automatically after sleep or hibernate? Have you found an effective workaround? Share your experience in the comments below!

Always On VPN Updates to Improve Connection Reliability

Always On VPN Updates to Improve Connection ReliabilityA longstanding issue with Windows 10 Always On VPN is that of VPN tunnel connectivity reliability and device tunnel/user tunnel interoperability. Many administrators have reported that Always On VPN connections fail to establish automatically at times, that only one tunnel comes up at a time (user tunnel or device tunnel, but not both), or that VPN tunnels fail to establish when coming out of sleep or hibernate modes. Have a look at the comments on this post and you’ll get a good understanding of the issues with Always On VPN.

Recent Updates

The good news is that most of these issues have been resolved with recent updates to Windows 10 1803 and 1809. Specifically, the February 19, 2019 update for Windows 10 1803 (KB4487029) and the March 1, 2019 update for Windows 10 1809 (KB4482887) include fixes to address these known issues. Administrators are encouraged to deploy Windows 10 1803 with the latest updates applied when implementing Always On VPN. Windows 10 1809 with the latest updates applied is preferred though.

Persistent Issues

Although initial reports are favorable for these updates and based on my experience the effectiveness and reliability of Windows 10 Always On VPN is greatly improved, there have still been some reports of intermittent VPN tunnel establishment failures.

Possible Causes

During my testing, after applying the updates referenced earlier both device tunnel and user tunnel connections are established much more consistently than before the updates were applied. I did encounter some issues, however. Specifically, when coming out of sleep or hibernate, VPN connections would fail to establish. Occasionally VPN connections would fail after a complete restart.

NCSI

After further investigation it was determined that the connectivity failure was caused by the Network Connectivity Status Indicator (NCSI) probe failing, causing Windows to report “No Internet access”.

Always On VPN Updates to Improve Connection Reliability

Cisco Umbrella Roaming Client

In this instance the NCSI probe failure was caused by the Cisco Umbrella Roaming Client installed and running on the device. The Umbrella Roaming Client is security software that provides client protection by monitoring and filtering DNS queries. It operates by configuring a DNS listener on the loopback address. NCSI probes are known to fail when the DNS server is running on a different interface than is being tested.

Resolution

Microsoft released a fix for this issue in Windows 10 1709. The fix involves changing a group policy setting to disable interface binding when perform DNS lookups by the NCSI. You can enable this setting via Active Directory group policy by navigating to Computer Configuration > Administrative Templates > Network > Network Connectivity Status Indicator > Specify global DNS. Select Enabled and check the option to Use global DNS, as shown here.

Always On VPN Updates to Improve Connection Reliability

For testing purposes this setting can be enabled individual using the following PowerShell command.

New-ItemProperty -Path “HKLM:\SOFTWARE\Policies\Microsoft\Windows\NetworkConnectivityStatusIndicator\” -Name UseGlobalDNS -PropertyType DWORD -Value 1 -Force

Third-Party Software

As Always On VPN connectivity can be affected by NCSI, any third-party firewall or antivirus/antimalware solution could potentially introduce VPN connection instability. Observe NCSI operation closely when troubleshooting unreliable connections with Always On VPN.

Additional Information

Windows 10 1803 Update KB4487029

Windows 10 1809 Update KB4482887

Cisco Umbrella Roaming Client Limited Network Connectivity Warning

Network Connectivity Status Indicator (NCSI) Operation Explained

%d bloggers like this: