Always On VPN SSTP Load Balancing with F5 BIG-IP

Always On VPN SSTP Load Balancing with F5 BIG-IP The Windows Server Routing and Remote Access Service (RRAS) includes support for the Secure Sockets Tunneling Protocol (SSTP), which is a Microsoft proprietary VPN protocol that uses SSL/TLS for security and privacy of VPN connections. The advantage of using SSTP for Always On VPN is that it is firewall friendly and ensures consistent remote connectivity even behind highly restrictive firewalls.

Load Balancing SSTP

In a recent post, I described some of the use cases and benefits of SSTP load balancing as well as the offloading of TLS for SSTP VPN connections. Using a load balancer for SSTP VPN connections increases scalability, and offloading TLS for SSTP reduces resource utilization and improves performance for VPN connections. There are positive security benefits too.

Configuration

Enabling load balancing for SSTP on the F5 BIG-IP load balancer is fundamentally similar to load balancing HTTPS web servers. However, there are a few subtle but important differences.

Default Monitor

The default HTTP and HTTPS monitors on the F5 will not accurately reflect the health of the SSTP service running on the RRAS server. In addition, using a simple TCP port monitor could yield unexpected results. To ensure accurate service status monitoring, a new custom monitor must be created to validate the health of the SSTP service.

Custom SSTP Monitor

Open the F5 BIG-IP management console and follow the steps below to create and assign a new custom monitor for SSTP.

Create Monitor

1. In the navigation tree highlight Local Traffic.
2. Click Monitors.
3. Click Create.

Always On VPN SSTP Load Balancing with F5 BIG-IP

4. Enter a descriptive name in the Name field and from the Type drop-down list choose HTTP if TLS offload is enabled, or HTTPS if it is not.
5. In the Send String field enter HEAD /sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}/ HTTP/1.1\r\nHost:r\nConnection: Close\r\n\r\n.
6. In the Receive String field enter HTTP/1.1 401.
7. Click Finished.

Always On VPN SSTP Load Balancing with F5 BIG-IP

Assign Monitor

1. Below Local Traffic click Pools.
2. Click on the SSTP VPN server pool.
3. In the Health Monitors section select the SSTP VPN health monitor from the Available list and make it Active.
4. Click Update.

Always On VPN SSTP Load Balancing with F5 BIG-IP

CLI Configuration

If you prefer to configure the SSTP VPN monitor using the F5’s Command Line Interface (CLI), you can download the monitor configuration from my GitHub here.

TLS Offload

It is generally recommended that TLS offload not be enabled for SSTP VPN. However, if TLS offload is desired, it is configured in much the same way as a common HTTPS web server. Specific guidance for enabling TLS offload on the F5 BIG-IP can be found here. Details for configuring RRAS and SSTP to support TLS offload can be found here.

Certificates

When enabling TLS offload for SSTP VPN connections it is recommended that the public SSL certificate be installed on the RRAS server, even though TLS processing will be handled on the F5 and HTTP will be used between the F5 and the RRAS server. If installing the public SSL certificate on the RRAS server is not an option, additional configuration will be required. Specifically, TLS offload for SSTP must be configured using the Enable-SSTPOffload PowerShell script, which can be found here.

Once the script has been downloaded, open an elevated PowerShell command window and enter the following command.

Enable-SSTPOffload -CertificateHash [SHA256 Certificate Hash of Public SSL Certificate] -Restart

Example:

Enable-SSTPOffload -CertificateHash “C3AB8FF13720E8AD9047DD39466B3C8974E592C2FA383D4A3960714CAEF0C4F2” -Restart

Re-Encryption

When offloading TLS for SSTP VPN connections, all traffic between the F5 and the RRAS server will be sent in the clear using HTTP. In some instances, TLS offload is required only for traffic inspection, not performance gain. In this scenario the F5 will be configured to terminate and then re-encrypt connections to the RRAS server. When terminating TLS on the F5 and re-encrypting connections to the RRAS server is required, the same certificate must be used on both the F5 and the RRAS server. Using different certificates on the RRAS server and the load balancer is not supported.

Additional Information

Always On VPN Load Balancing

Windows 10 Always On VPN SSTP Load Balancing and SSL Offload

Windows 10 Always On VPN SSL Certificate Requirements for SSTP

Windows 10 Always On VPN ECDSA SSL Certificate Request for SSTP

Windows 10 Always On VPN SSTP Connects then Disconnects

Windows 10 Always On VPN Load Balancing Deployment Guide for Kemp Load Balancers

 

Always On VPN Load Balancing Deployment Guide for Kemp Load Balancers

Always On VPN Load Balancing Deployment Guide for Kemp Load BalancersI’m pleased announce that Kemp has released their Load Balancing Deployment Guide for Windows 10 Always On VPN. Authored by yours truly, this guide provides detailed, prescriptive guidance for configuring the Kemp LoadMaster load balancer to provide important scalability and eliminate critical points of failure in Always On VPN deployments.

Configuration Guidance

Included in the guide are configuration steps for load balancing VPN servers using IKEv2 and SSTP using Kemp LoadMaster. Crucial details for IKEv2 load balancing as well as SSL offload for SSTP are covered in detail. In addition, the guide includes information about load balancing important supporting infrastructure services such as the Network Policy Server (NPS). Finally, guidance is included for enabling active/passive or active/active load balancing as well as geographic load balancing for multisite Always On VPN deployments.

Always On VPN Load Balancing Deployment Guide for Kemp Load Balancers

Download

You can download the Windows 10 Always On VPN load balancing deployment guide for Kemp LoadMaster load balancers here.

Additional Information

Always On VPN Load Balancing

Windows 10 Always On VPN Load Balancing Deployment Guide for Kemp LoadMaster Load Balancers

Windows 10 Always On VPN IKEv2 Load Balancing with the Kemp LoadMaster Load Balancer

 

 

Always On VPN IKEv2 Features and Limitations

Always On VPN IKEv2 Features and LimitationsThe Internet Key Exchange version 2 (IKEv2) VPN protocol is a popular choice for Windows 10 Always On VPN deployments. IKEv2 is a standards-based IPsec VPN protocol with customizable security parameters that allows administrators to provide the highest level of protection for remote clients. In addition, it provides important interoperability with a variety of VPN devices, including Microsoft Windows Server Routing and Remote Access Service (RRAS) and non-Microsoft platforms such as Cisco, Checkpoint, Palo Alto, and others.

IKEv2 Limitations

IKEv2 is clearly the protocol of choice in terms of security. It supports modern cryptography and is highly resistant to interception. It’s not without some operational challenges, however. Consider the following.

Firewalls

IKEv2 uses UDP ports 500 and 4500 for communication. Unfortunately, these ports are not always open. Often, they are blocked by network administrators to prevent users from bypassing security controls or attackers from exfiltrating data.

Fragmentation

IKEv2 packets can become quite large at times, especially when using client certificate authentication with the Protected Extensible Authentication Protocol (PEAP). This can result in fragmentation occurring at the network layer. Unfortunately, many firewalls and network devices are configured to block IP fragments by default. This can result in failed connection attempts from some locations but not others.

Load Balancing

Load balancing IKEv2 connections is not entirely straightforward. Without special configuration, load balancers can cause intermittent connectivity issues for Always On VPN connections. Guidance for configuring IKEv2 load balancing on the Kemp LoadMaster and the F5 BIG-IP can be found here:

IKEv2 Fragmentation

IKEv2 fragmentation can be enabled to avoid IP fragmentation and restore reliable connectivity. IKEv2 fragmentation is supported in Windows 10 and Windows Server beginning with v1803. Guidance for enabling IKEv2 fragmentation on Windows Server RRAS can be found here. Support for IKEv2 fragmentation on non-Microsoft firewall/VPN devices is vendor-specific. Consult with your device manufacturer for more information.

IKEv2 Security and RRAS

Be advised that the default security settings for IKEv2 on Windows Server RRAS are very poor. The minimum recommended security settings and guidelines for implementing them can be found here.

IKEv2 or TLS?

IKEv2 is recommend for deployments where the highest level of security and protection is required for remote connections. In these scenarios, the sacrifice of ubiquitous availability in favor of ultimate security might be desired.

SSTP or another TLS-based VPN protocol is recommended if reliable operation and connectivity are desired. SSTP and TLS VPNs can be configured to provide very good security by following the security and implementation guidelines found here.

IKEv2 with TLS Fallback

In theory, preferring IKEv2 and falling back to the Secure Socket Tunneling Protocol (SSTP) or another TLS-based VPN protocol when IKEv2 is unavailable would seem like a logical choice. This would ensure the highest level of protection, while still providing reliable connectivity. Unfortunately, the Windows VPN client doesn’t work this way in practice. Details here.

Additional Information

Windows 10 Always On VPN IKEv2 Load Balancing with F5 BIG-IP

Windows 10 Always On VPN IKEv2 Load Balancing with Kemp LoadMaster

Windows 10 Always On VPN IKEv2 Fragmentation

Windows 10 Always On VPN IKEv2 and SSTP Fallback

Windows 10 Always On VPN IKEv2 Security Configuration

Windows 10 Always On VPN Certificate Requirements for IKEv2

Windows 10 Always On VPN Protocol Recommendations for Windows Server RRAS

Always On VPN IKEv2 Load Balancing with F5 BIG-IP

Always On VPN IKEv2 Load Balancing with F5 BIG-IPThe Internet Key Exchange version 2 (IKEv2) is the protocol of choice for Always On VPN deployments where the highest level of security is required. Implementing Always On VPN at scale often requires multiple VPN servers to provide sufficient capacity and to provide redundancy. Commonly an Application Delivery Controller (ADC) or load balancer is configured in front of the VPN servers to provide scalability and high availability for Always On VPN.

Load Balancing IKEv2

In a recent post I described some of the unique challenges load balancing IKEv2 poses, and I demonstrated how to configure the Kemp LoadMaster load balancer to properly load balance IKEv2 VPN connections. In this post I’ll outline how to configure IKEv2 VPN load balancing on the F5 BIG-IP load balancer.

Note: This article assumes the administrator is familiar with basic F5 BIG-IP load balancer configuration, such as creating nodes, pools, virtual servers, etc.

Initial Configuration

Follow the steps below to create a virtual server on the F5 BIG-IP to load balance IKEv2 VPN connections.

Pool Configuration

To begin, create two pools on the load balancer. The first pool will be configured to use UDP port 500, and the second pool will be configured to use UDP port 4500. Each pool is configured with the VPN servers defined as the individual nodes.

Always On VPN IKEv2 Load Balancing with F5 BIG-IP

Virtual Server Configuration

Next create two virtual servers, the first configured to use UDP port 500 and the second to use UDP port 4500.

Always On VPN IKEv2 Load Balancing with F5 BIG-IP

To ensure reliable connectivity for IKEv2 connections it is necessary for the VPN server to see the client’s original source IP address. When configuring virtual server, select None from the Source Address Translation drop-down list.

Always On VPN IKEv2 Load Balancing and NAT

Persistence Profile

To ensure that both IKEv2 UDP 500 and 4500 packets are delivered to the same node, follow the steps below to create and assign a Persistence Profile.

1. Expand Local Traffic > Profiles and click Persistence.
2. Click Create.
3. Enter a descriptive name for the profile in the Name field.
4. Select Source Address Affinity from the Persistence Type drop-down list.
5. Click the Custom check box.
6. Select the option to Match Across Services.
7. Click Finished.

Always On VPN IKEv2 Load Balancing with F5 BIG-IP

Assign the new persistence profile to both UDP 500 and 4500 virtual servers. Navigate to the Resources tab on each virtual server and select the new persistence profile from the Default Persistence Profile drop-down list. Be sure to do this for both virtual servers.

Always On VPN IKEv2 Load Balancing with F5 BIG-IP

Additional Resources

Always On VPN Load Balancing

Windows 10 Always On VPN IKEv2 Load Balancing and NAT

Windows 10 Always On VPN IKEv2 Load Balancing with Kemp LoadMaster Load Balancer 

Windows 10 Always On VPN IKEv2 Security Configuration

Windows 10 Always On VPN and IKEv2 Fragmentation

Windows 10 Always On VPN Certificate Requirements for IKEv2

Video: Windows 10 Always On VPN Load Balancing with the Kemp LoadMaster Load Balancer

Always On VPN SSTP Connects then Disconnects

Always On VPN SSTP Connects then DisconnectsWhen Always On VPN clients are configured to use the Secure Socket Tunneling Protocol (SSTP) with Windows Server Routing and Remote Access Service (RRAS), administrators may encounter a scenario in which a client can establish a VPN connection using SSTP successfully, but is then disconnected immediately. The system event log contains an entry with Event ID 6 from the RasSstp source that includes the following error message.

“The SSTP-based VPN connection to the remote access server was terminated because of a security check failure. Security settings on the remote access server do not match settings on this computer. Contact the system administrator of the remote access server and relay the following information.”

Always On VPN Connect and Disconnect with SSTP

Common Causes

The two most common causes of this issue are when SSTP is configured for SSL offload, and when a VPN client is on a network where SSL inspection is taking place.

SSTP Offload

The most common cause of this issue is when SSL offload is configured for SSTP on an external load balancer or application delivery controller (ADC). To prevent interception from a Man-in-the-Middle attack, the VPN client sends the certificate hash of the SSL certificate used when the VPN connection was established. If this information does not match what is configured on the RRAS server, the connection is assumed to be compromised and the connection is immediately dropped.

SSL Inspection

Another scenario where this issue may occur is when a VPN client is behind a network device configured to perform SSL deep-packet inspection (DPI). SSTP VPN clients will be unable to connect to the VPN server in this scenario.

Resolution

When offloading SSL to another device, the RRAS server must be configured to know which SSL certificate is being presented to remote clients. This information is stored in the following registry key.

HKLM:\SYSTEM\CurrentControlSet\Services\SstpSvc\Parameters\SHA256CertificateHash

However, this registry entry requires a binary value, which makes it a challenge to configure manually. To resolve this problem, it is recommended that the same SSL certificate installed on the load balancer/ADC also be installed on the VPN server (even though SSL will be offloaded). To do this, first import the SSL certificate and private key in to the Local Computer certificate store, then open the RRAS management console and perform the following steps.

  1. Right-click the VPN server and choose Properties.
  2. Select the Security tab.
  3. Uncheck Use HTTP in the SSL Certificate Binding section.
  4. Select the appropriate SSL certificate from the Certificate drop-down list (click View to verify).
  5. Click Apply.

This will add the correct SSL certificate information to the registry. Next, re-enable HTTP for SSL offload by performing the following steps.

  1. Check Use HTTP in the SSL Certificate Binding section.
  2. Click Apply.

PowerShell Configuration

If the SSL certificate cannot be installed on the VPN server, or to automate this configuration across multiple servers remotely, download and run the Enable-SstpOffload PowerShell script from my GitHub repository here and run the following command.

Enable-SSTPOffload -CertificateHash [SHA256 Certificate Hash of Public SSL Certificate] -Restart

For example…

Enable-SSTPOffload -CertificateHash “C3AB8FF13720E8AD9047DD39466B3C8974E592C2FA383D4A3960714CAEF0C4F2” -Restart

Additional Information

Windows 10 Always On VPN Load Balancing and SSL Offload

Windows 10 Always On VPN SSTP Load Balancing with F5 BIG-IP

Windows 10 Always On VPN SSL Certificate Requirements for SSTP

Windows 10 Always On VPN Protocol Recommendations for Windows Server RRAS

 

Always On VPN SSTP Load Balancing and SSL Offload

SSL Certificate Considerations for DirectAccess IP-HTTPSThe Windows Server Routing and Remote Access Service (RRAS) is a popular choice for a VPN server to support Windows 10 Always On VPN deployments. One significant advantage RRAS provides is support for the Secure Socket Tunneling Protocol (SSTP). SSTP is a Microsoft proprietary VPN protocol that uses Transport Layer Security (TLS) to ensure privacy between the VPN client and server. The advantage to using a TLS-based transport is that it leverages the standard HTTPS TCP port 443, making it firewall friendly and ensuring ubiquitous remote access even behind highly restrictive firewalls.

Load Balancing SSTP

Load balancing SSTP can be accomplished in much the same way as a load balancing a common web server using HTTPS. The external load balancer is configured with a virtual IP address (VIP) and each VPN server is configured behind it. Session persistence should be configured to use SSL with source IP address persistence as a fallback.

SSL Offload for SSTP

In most cases, simply forwarding encrypted SSTP connections to the VPN server will be sufficient. However, offloading SSL/TLS processing to an Application Delivery Controller (ADC) or load balancer can be beneficial for the following reasons.

Resource Utilization

Enabling TLS offload for SSTP VPN connections can reduce CPU and memory utilization on the VPN server. However, this will likely only be necessary for very busy servers supporting many concurrent connections.

Security

In some cases, the administrator may not be able to install the public SSL certificate on the VPN server. For example, a security policy may exist that restricts SSL certificate installation to dedicated security devices using a Hardware Security Module (HSM). In some cases, it may be desirable to restrict access to high value certificates such as wildcard certificates.

Certificate Management

Often SSL certificates are implemented on load balancers to reduce certificate sprawl and to ease the management and administration burden in the enterprise. By having all enterprise certificates installed only on dedicated security devices, administrators can more effectively monitor and manage SSL certificate lifecycles.

SSTP Configuration for TLS Offload

Configuration changes must be made on the load balancer and the RRAS server to support TLS offload for SSTP.

Load Balancer

Install the public SSL certificate on the load balancer and configure it for TLS termination. Configure the load balancer to then use HTTP for backend server connections. Consult the load balancer vendor’s documentation for configuration guidance.

Load Balancing Always On VPN SSTP Load Balancing with F5 BIG-IP

RRAS Server

If the public SSL certificate is installed on the VPN server, enabling TLS offload for SSTP is simple and straightforward. Follow the steps below to enable TLS offload for SSTP VPN connections.

  1. Open the RRAS management console (rrasmgmt.msc).
  2. Right-click the VPN server and choose Properties.
  3. Select the Security tab.
  4. Check Use HTTP in the SSL Certificate Binding section.
  5. Click Ok and then Yes to restart the Remote Access service.

Always On VPN SSTP Load Balancing and SSL Offload

If the public SSL certificate is not or cannot be installed on the RRAS server, additional configuration will be required. Specifically, SSL offload for SSTP must be configured using the Enable-SSTPOffload PowerShell script, which can be downloaded here.

Once the script has been downloaded and imported, open an elevated PowerShell command window and enter the following command.

Enable-SSTPOffload -CertificateHash [SHA256 Certificate Hash of Public SSL Certificate] -Restart

For example…

Enable-SSTPOffload -CertificateHash “C3AB8FF13720E8AD9047DD39466B3C8974E592C2FA383D4A3960714CAEF0C4F2” -Restart

Re-Encryption

When offloading TLS for SSTP VPN connections, all traffic between the load balancer and the VPN server will be sent in the clear using HTTP. In some scenarios, TLS offload is required only for traffic inspection, not performance gain. When terminating TLS on the load balancer and re-encrypting connections to the VPN server is required, it is only supported if the same certificate is used on both the load balancer and the VPN server.

Additional Information

Always On VPN Load Balancing

Windows 10 Always On VPN SSL Certificate Requirements for SSTP

Windows 10 Always On VPN SSL Load Balancing with F5 BIG-IP

Windows 10 Always On VPN IKEv2 and SSTP Fallback

Windows 10 Always On VPN Hands-On Training Classes for 2019

Always On VPN and Network Policy Server (NPS) Load Balancing

Always On VPN and Network Policy Server (NPS) Load BalancingLoad balancing Windows Server Network Policy Servers (NPS) is straightforward in most deployment scenarios. Most VPN servers, including Windows Server Routing and Remote Access Service (RRAS) servers allow the administrator to configure multiple NPS servers for redundancy and scalability. In addition, most solutions support weighted distribution, allowing administrators to distribute requests evenly between multiple NPS servers (round robin load balancing) or to distribute them in order of priority (active/passive failover).

The Case for NPS Load Balancing

Placing NPS servers behind a dedicated network load balancing appliance is not typically required. However, there are some deployment scenarios where doing so can provide important advantages.

Deployment Flexibility

Having NPS servers fronted by a network load balancer allows the administrator to configure a single, virtual IP address and hostname for the NPS service. This provides deployment flexibility by allowing administrators to add or remove NPS servers without having to reconfigure VPN servers, network firewalls, or VPN clients. This can be beneficial when deploying Windows updates, migrating NPS servers to different subnets, adding more NPS servers to increase capacity, or performing rolling upgrades of NPS servers.

Traffic Shaping

Dedicated network load balancers allow for more granular control and of NPS traffic. For example, NPS routing decisions can be based on real server availability, ensuring that authentication requests are never sent to an NPS server that is offline or unavailable for any reason. In addition, NPS traffic can be distributed based on server load, ensuring the most efficient use of NPS resources. Finally, most load balancers also support fixed or weighted distribution, enabling active/passive failover scenarios if required.

Traffic Visibility

Using a network load balancer for NPS also provides better visibility for NPS authentication traffic. Most load balancers feature robust graphical displays of network utilization for the virtual server/service as well as backend servers. This information can be used to ensure enough capacity is provided and to monitor and plan for additional resources when network traffic increases.

Configuration

Before placing NPS servers behind a network load balancer, the NPS server certificate must be specially prepared to support this unique deployment scenario. Specifically, the NPS server certificate must be configured with the Subject name of the cluster, and the Subject Alternative Name field must include both the cluster name and the individual server’s hostname.

Always On VPN and Network Policy Server (NPS) Load Balancing

Always On VPN and Network Policy Server (NPS) Load Balancing

Create Certificate Template

Perform the following steps to create a certificate template in AD CS to support NPS load balancing.

  1. Open the Certificate Templates management console (certtmpl.msc) on the certification authority (CA) server or a management workstation with the remote administration tools installed.
  2. Right-click the RAS and IAS Servers default certificate template and choose Duplicate.
  3. Select the Compatibility tab.
    1. Select Windows Server 2008 or a later version from the Certification Authority drop-down list.
    2. Select Windows Vista/Server 2008 or a later version from the Certificate recipient drop-down list.
  4. Select the General tab.
    1. Enter a descriptive name in the Template display name field.
    2. Choose an appropriate Validity period and Renewal period.
    3. Do NOT select the option to Publish certificate in Active Directory.
  5. Select the Cryptography tab.
    1. Choose Key Storage Provider from the Provider Category drop-down list.
    2. Enter 2048 in the Minimum key size field.
    3. Select SHA256 from the Request hash drop-down list.
  6. Select the Subject Name tab.
    1. Select the option to Supply in the request.
  7. Select the Security tab.
    1. Highlight RAS and IAS Servers and click Remove.
    2. Click Add.
    3. Enter the security group name containing all NPS servers.
    4. Check the Read and Enroll boxes in the Allow column in the Permissions for [group name] field.
  8. Click Ok.

Perform the steps below to publish the new certificate template in AD CS.

  1. Open the Certification Authority management console (certsrv.msc) on the certification authority (CA) server or a management workstation with the remote administration tools installed.
  2. Expand Certification Authority (hostname).
  3. Right-click Certificate Templates and choose New and Certificate Template to Issue.
  4. Select the certificate template created previously.
  5. Click Ok.

Request Certificate on NPS Server

Perform the following steps to request a certificate for the NPS server.

  1. Open the Certificates management console (certlm.msc) on the NPS server.
  2. Expand the Personal folder.
  3. Right-click Certificates and choose All Tasks and Request New Certificate.
  4. Click Next.
  5. Click Next.
  6. Select the NPS server certificate template and click More information is required to enroll for this certificate link.
  7. Select the Subject tab.
    1.  Select Common name from the Type drop-down list in the Subject name section.
    2. Enter the cluster fully-qualified hostname (FQDN) in the Value field.
    3. Click Add.
    4. Select DNS from the Type drop-down list in the Alternative name section.
    5. Enter the cluster FQDN in the Value field.
    6. Click Add.
    7. Enter the NPS server’s FQDN in the Value field.
    8. Click Add.
      Always On VPN and Network Policy Server (NPS) Load Balancing
  8. Select the General tab.
    1. Enter a descriptive name in the Friendly name field.
  9. Click Ok.
  10. Click Enroll.

Load Balancer Configuration

Configure the load balancer to load balance UDP ports 1812 (authentication) and 1813 (accounting). Optionally, to ensure that authentication and accounting requests go to the same NPS server, enable source IP persistence according to the vendor’s guidance. For the KEMP LoadMaster load balancer, the feature is called “port following”. On the F5 BIG-IP it is called a “persistence profile”, and on the Citrix NetScaler it is called a “persistency group”.

Additional Information

Always On VPN Load Balancing

Always On VPN IKEv2 Load Balancing with KEMP LoadMaster

Always On VPN Hands-On Training Classes in U.S. and Europe

Always On VPN IKEv2 Load Balancing with KEMP LoadMaster

Always On VPN IKEv2 Load Balancing with KEMP LoadMasterInternet Key Exchange version 2 (IKEv2) is an IPsec-based VPN protocol with configurable security parameters that allows administrators to ensure the highest level of security for Windows 10 Always On VPN clients. It is the protocol of choice for deployments that require the best possible protection for communication between remote clients and the VPN server. IKEv2 has some unique requirements when it comes to load balancing, however. Because it uses UDP on multiple ports, configuring the load balancer requires some additional steps for proper operation. This article demonstrates how to enable IKEv2 load balancing using the Kemp LoadMaster load balancer.

IKEv2 and NAT

IKEv2 VPN security associations (SAs) begin with a connection to the VPN server that uses UDP port 500. During this initial exchange, if it is determined that the client, server, or both are behind a device performing Network Address Translation (NAT), the connection switches to UDP port 4500 and the connection establishment process continues.

IKEv2 Load Balancing Challenges

Since UDP is connectionless, there’s no guarantee that when the conversation switches from UDP 500 to UDP 4500 that the load balancer will forward the request to the same VPN server on the back end. If the load balancer forwards the UDP 500 session from a VPN client to one real server, then forwards the UDP 4500 session to a different VPN server, the connection will fail. The load balancer must be configured to ensure that both UDP 500 and 4500 from the same VPN client are always forwarded to the same real server to ensure proper operation.

Port Following

To meet this unique requirement for IKEv2 load balancing, it is necessary to use a feature on the KEMP LoadMaster load balancer called “port following”. Enabling this feature will ensure that a VPN client using IKEv2 will always have their UDP 500 and 4500 sessions forwarded to the same real server.

Load Balancing IKEv2

Open the web-based management console and perform the following steps to enable load balancing of IKEv2 traffic on the KEMP LoadMaster load balancer.

Create the Virtual Server

  1. Expand Virtual Services.
  2. Click Add New.
  3. Enter the IP address to be used by the virtual server in the Virtual Address field.
  4. Enter 500 in the Port field.
  5. Select UDP from the Protocol drop-down list.
  6. Click Add this Virtual Service.

Always On VPN IKEv2 Load Balancing with KEMP LoadMaster

Add Real Servers

  1. Expand Real Servers.
  2. Click Add New.
  3. Enter the IP address of the VPN server in the Real Server Address field.
  4. Click Add This Real Server.
  5. Repeat the steps above for each VPN server in the cluster.

Always On VPN IKEv2 Load Balancing with KEMP LoadMaster

Repeat all the steps above to create another virtual server using UDP port 4500.

Always On VPN IKEv2 Load Balancing with KEMP LoadMaster

Enable Layer 7 Operation

  1. Click View/Modify Services below Virtual Services in the navigation tree.
  2. Select the first virtual server and click Modify.
  3. Expand Standard Options.
  4. Uncheck Force L4.
  5. Check Transparency (additional configuration may be required – details here).
  6. Select Source IP Address from the Persistence Options drop-down list.
  7. Choose an appropriate value from the Timeout drop-down list.
  8. Choose an appropriate setting from the Scheduling Method drop-down list.
  9. Click Back.
  10. Repeat these steps on the second virtual server.

Always On VPN IKEv2 Load Balancing with KEMP LoadMaster

Enable Port Following

  1. Click View/Modify Services below Virtual Services in the navigation tree.
  2. Select the first virtual server and click Modify.
  3. Expand Advanced Properties.
  4. Select the virtual server using UDP 500 from the Port Following drop-down list.
  5. Click Back.
  6. Repeat these steps on the second virtual server.

Always On VPN IKEv2 Load Balancing with KEMP LoadMaster

Demonstration Video

The following video demonstrates how to enable IKEv2 load balancing for Windows 10 Always On VPN using the KEMP LoadMaster Load Balancer.

Summary

With the KEMP LoadMaster load balancer configured to use port following, Windows 10 Always On VPN clients using IKEv2 will be assured that their connections will always be delivered to the same back end VPN server, resulting in reliable load balancing for IKEv2 connections.

Additional Information

Always On VPN Load Balancing

Windows 10 Always On VPN Certificate Requirements for IKEv2

Windows 10 Always On VPN Protocol Recommendations for Windows Server RRAS

Always On VPN Multisite with Azure Traffic Manager

Always On VPN Multisite with Azure Traffic ManagerEliminating single points of failure is crucial to ensuring the highest levels of availability for any remote access solution. For Windows 10 Always On VPN deployments, the Windows Server 2016 Routing and Remote Access Service (RRAS) and Network Policy Server (NPS) servers can be load balanced to provide redundancy and high availability within a single datacenter. Additional RRAS and NPS servers can be deployed in another datacenter or in Azure to provide geographic redundancy if one datacenter is unavailable, or to provide access to VPN servers based on the location of the client.

Multisite Always On VPN

Unlike DirectAccess, Windows 10 Always On VPN does not natively include support for multisite. However, enabling multisite geographic redundancy can be implemented using Azure Traffic Manager.

Azure Traffic Manager

Traffic Manager is part of Microsoft’s Azure public cloud solution. It provides Global Server Load Balancing (GSLB) functionality by resolving DNS queries for the VPN public hostname to an IP address of the most optimal VPN server.

Advantages and Disadvantages

Using Azure Traffic manager has some benefits, but it is not with some drawbacks.

Advantages – Azure Traffic Manager is easy to configure and use. It requires no proprietary hardware to procure, manage, and support.

Disadvantages – Azure Traffic Manager offers only limited health check options. Today, only HTTP, HTTP, and TCP protocols can be used to perform endpoint health checks. There is no option to use UDP or PING, making monitoring for IKEv2 a challenge.

Note: This scenario assumes that RRAS with Secure Socket Tunneling Protocol (SSTP) or another third-party TLS-based VPN server is in use. If IKEv2 is to be supported exclusively, it will still be necessary to publish an HTTP or HTTPS-based service for Azure Traffic Manager to monitor site availability.

Traffic Routing Methods

Azure Traffic Manager provide four different methods for routing traffic.

Priority – Select this option to provide active/passive failover. A primary VPN server is defined to which all traffic is routed. If the primary server is unavailable, traffic will be routed to another backup server.

Weighted – Select this option to provide active/active failover. Traffic is routed to all VPN servers equally, or unequally if desired. The administrator defines the percentage of traffic routed to each server.

Performance – Select this option to route traffic to the VPN server with the lowest latency. This ensures VPN clients connect to the server that responds the quickest.

Geographic – Select this option to route traffic to a VPN server based on the VPN client’s physical location.

Multivalue – Select this option when endpoints must use IPv4 or IPv6 addresses.

Subnet – Select this option to map DNS responses to the client’s source IP address.

Configure Azure Traffic Manager

Open the Azure management portal and follow the steps below to configure Azure Traffic Manager for multisite Windows 10 Always On VPN.

Create a Traffic Manager Resource

  1. Click Create a resource.
  2. Click Networking.
  3. Click Traffic Manager profile.

Create a Traffic Manager Profile

  1. Enter a unique name for the Traffic Manager profile.
  2. Select an appropriate routing method (described above).
  3. Select a subscription.
  4. Create or select a resource group.
  5. Select a resource group location.
  6. Click Create.

Always On VPN Multisite with Azure Traffic Manager

Important Note: The name of the Traffic Manager profile cannot be used by VPN clients to connect to the VPN server, since a TLS certificate cannot be obtained for the trafficmanager.net domain. Instead, create a CNAME DNS record that points to the Traffic Manager FQDN and ensure that name matches the subject or a Subject Alternative Name (SAN) entry on the VPN server’s TLS and/or IKEv2 certificates.

Endpoint Monitoring

Open the newly created Traffic Manager profile and perform the following tasks to enable endpoint monitoring.

  1. Click Configuration.
  2. Select HTTPS from the Protocol drop-down list.
  3. Enter 443 in the Port field.
  4. Enter /sra_%7BBA195980-CD49-458b-9E23-C84EE0ADCD75%7D/ in the Path field.
  5. Enter 401-401 in the Expected Status Code Ranges field.
  6. Update any additional settings, such as DNS TTL, probing interval, tolerated number of failures, and probe timeout, as required.
  7. Click Save.

aovpn_traffic_manager_multisite_001

Endpoint Configuration

Follow the steps below to add VPN endpoints to the Traffic Manager profile.

  1. Click Endpoints.
  2. Click Add.
  3. Select External Endpoint from the Type drop-down list.
  4. Enter a descriptive name for the endpoint.
  5. Enter the Fully Qualified Domain Name (FQDN) or the IP address of the first VPN server.
  6. Select a geography from the Location drop-down list.
  7. Click OK.
  8. Repeat the steps above for any additional datacenters where VPN servers are deployed.

Always On VPN Multisite with Azure Traffic Manager

Summary

Implementing multisite by placing VPN servers is multiple physical locations will ensure that VPN connections can be established successfully even when an entire datacenter is offline. In addition, active/active scenarios can be implemented, where VPN client connections can be routed to the most optimal datacenter based on a variety of parameters, including current server load or the client’s current location.

Additional Information

Windows 10 Always On VPN Hands-On Training Classes

DirectAccess Manage Out with ISATAP and NLB Clustering

DirectAccess Manage Out with ISATAP and NLB ClusteringDirectAccess connections are bidirectional, allowing administrators to remotely connect to clients and manage them when they are out of the office. DirectAccess clients use IPv6 exclusively, so any communication initiated from the internal network to remote DirectAccess clients must also use IPv6. If IPv6 is not deployed natively on the internal network, the Intrasite Automatic Tunnel Addressing Protocol (ISATAP) IPv6 transition technology can be used to enable manage out.

ISATAP Supportability

According to Microsoft’s support guidelines for DirectAccess, using ISATAP for manage out is only supported for single server deployments. ISATAP is not supported when deployed in a multisite or load-balanced environment.

“Not supported” is not the same as “doesn’t work” though. For example, ISATAP can easily be deployed in single site DirectAccess deployments where load balancing is provided using Network Load Balancing (NLB).

ISATAP Configuration

To do this, you must first create DNS A resource records for the internal IPv4 address for each DirectAccess server as well as the internal virtual IP address (VIP) assigned to the cluster.

DirectAccess Manage Out with ISATAP and NLB Clustering

Note: Do NOT use the name ISATAP. This name is included in the DNS query block list on most DNS servers and will not resolve unless it is removed. Removing it is not recommended either, as it will result in ALL IPv6-enabled hosts on the network configuring an ISATAP tunnel adapter.

Once the DNS records have been added, you can configure a single computer for manage out by opening an elevated PowerShell command window and running the following command:

Set-NetIsatapConfiguration -State Enabled -Router [ISATAP FQDN] -PassThru

DirectAccess Manage Out with ISATAP and NLB Clustering

Once complete, an ISATAP tunnel adapter network interface with a unicast IPv6 address will appear in the output of ipconfig.exe, as shown here.

DirectAccess Manage Out with ISATAP and NLB Clustering

Running the Get-NetRoute -AddressFamily IPv6 PowerShell command will show routes to the client IPv6 prefixes assigned to each DirectAccess server.

DirectAccess Manage Out with ISATAP and NLB Clustering

Finally, verify network connectivity from the manage out host to the remote DirectAccess client.

Note: There is a known issue with some versions of Windows 10 and Windows Server 2016 that may prevent manage out using ISATAP from working correctly. There’s a simple workaround, however. More details can be found here.

Group Policy Deployment

If you have more than a few systems on which to enable ISATAP manage out, using Active Directory Group Policy Objects (GPOs) to distribute these settings is a much better idea. You can find guidance for creating GPOs for ISATAP manage out here.

DirectAccess Client Firewall Configuration

Simply enabling ISATAP on a server or workstation isn’t all that’s required to perform remote management on DirectAccess clients. The Windows firewall running on the DirectAccess client computer must also be configured to securely allow remote administration traffic from the internal network. Guidance for configuring the Windows firewall on DirectAccess clients for ISATAP manage out can be found here.

ISATAP Manage Out for Multisite and ELB

The configuration guidance in this post will not work if DirectAccess multisite is enabled or external load balancers (ELB) are used. However, ISATAP can still be used. For more information about enabling ISATAP manage out with external load balancers and/or multisite deployments, fill out the form below and I’ll provide you with more details.

Summary

Once ISATAP is enabled for manage out, administrators on the internal network can remotely manage DirectAccess clients wherever they happen to be. Native Windows remote administration tools such as Remote Desktop, Windows Remote Assistance, and the Computer Management MMC can be used to manage remote DirectAccess clients. In addition, enterprise administration tools such as PowerShell remoting and System Center Configuration Manger (SCCM) Remote Control can also be used. Further, third-party remote administration tools such as VNC, TeamViewer, LogMeIn, GoToMyPC, Bomgar, and many others will also work with DirectAccess ISATAP manage out.

Additional Information

ISATAP Recommendations for DirectAccess Deployments

DirectAccess Manage Out with ISATAP Fails on Windows 10 and Windows Server 2016 

DirectAccess Client Firewall Rule Configuration for ISATAP Manage Out

DirectAccess Manage Out and System Center Configuration Manager (SCCM)

Contact Me

Interested in learning more about ISATAP manage out for multisite and external load balancer deployments? Fill out the form below and I’ll get in touch with you.

← Back

Thank you for your response. ✨