All posts tagged user tunnel

Always On VPN Error 13801

Troubleshooting Always On VPN Error 691 and 812 – Part 2

Certificate configuration is crucial for Always On VPN deployments. I described some specific certificates requirements for IKEv2 in this previous post. Following this guidance, administrators should have no issues with IKEv2 Always On VPN connections. However, it is always possible to encounter an error if any of these certificates are missing or misconfigured.

Error 13801

One of the most common errors related to IKEv2 and certificates is 13801. When an Always On VPN connection using IKEv2 fails, the Windows Application event log will record an event ID 20227 from the RasClient source. The error message states the following:

“The user [username] dialed a connection named [connection name] which has failed. The error code returned on failure is 13801”.

IKE Authentication Credentials are Unacceptable

Error 13801 translates to ERROR_IPSEC_IKE_AUTH_FAIL, indicating an authentication failure related to IPsec. The problem can be on the device, the VPN server, or an issue with the VPN server configuration.

Certificate Chain

A 13801 error will occur if the client does not trust the certificate installed on the VPN server. Ensure the client has all the necessary root and intermediate certification authority (CA) certificates installed in their respective certificate stores.

VPN Server Certificate

A 13801 error can also occur if the VPN server does not have a properly configured server certificate. Ensure the VPN server has a valid certificate issued by the organization’s internal PKI that includes both the Server Authentication (OID 1.3.6.1.5.5.7.3.1) and IP security IKE intermediate (OID 1.3.6.1.5.5.8.2.2) EKUs. The subject name must match the public fully qualified domain name (FQDN) used by VPN clients to connect to the VPN server (not the server’s NetBIOS name). Again, ensure the certificate is valid (not expired), trusted, not revoked, and all necessary root and intermediate CA certificates are installed in their respective certificate stores.

Certificate Revocation

An expired Certificate Revocation List (CRL) can also result in a 13801 error. Open the Enterprise PKI console (pkiview.msc) on an issuing CA and review the status of all CRLs. If any are expired, resolve any issues preventing the CRL from publishing successfully, then issue a new CRL by running certutil.exe -crl on the issuing CA server.

RRAS Configuration

Another cause of the 13801 error for the device tunnel is a misconfigured Routing and Remote Access Service (RRAS) VPN server. An error 13801 can happen if the administrator incorrectly defines a trusted root CA using Set-VpnAuthProtocol. Ensure that the root certificate thumbprint matches exactly the root CA server’s thumbprint used to issue certificates to VPN devices and the VPN server.

Get-VpnAuthProtocol

Root CA Certificate Thumbprint

Resolution

Ensure that devices and VPN servers have correctly configured certificates installed. If the root CA certificate is assigned incorrectly on the VPN server, follow the guidelines detailed here to update the configuration.

Additional Information

Microsoft Windows Always On VPN Error 13806

Microsoft Windows Always On VPN Certificate Requirements for IKEv2

Microsoft Windows Always On VPN IPsec Root Certificate Configuration Issue

Microsoft Windows Always On VPN IKEv2 Policy Mismatch Error

Microsoft Windows Always On VPN IKEv2 Security Configuration

Microsoft Windows Always On VPN IKEv2 Fragmentation

Microsoft Windows Always On VPN IKEv2 Load Balancing and NAT

Microsoft Windows Always On VPN IKEv2 Features and Limitations

22 Comments

by Richard M. Hicks on December 13, 2021 • Permalink

Posted by Richard M. Hicks on December 13, 2021

https://directaccess.richardhicks.com/2021/12/13/always-on-vpn-error-13801/

Always On VPN Class-Based Default Route and Intune

`Always On VPN Class-Based Default Route and Intune In a recent post, I described how to configure routing for Windows 10 Always On VPN clients. In that article, I shared guidance for disabling the class-based default route in favor of defining specific routes for the VPN client. While this is easy enough to do when you use custom XML (deployed via PowerShell, SCCM, or Intune), there is a known limitation when using the native Intune UI that could present some challenges.

Intune VPN Profile Configuration

Defining specific routes is easy to do in Intune using the native VPN configuration profile. In the Configuration settings expand Split Tunneling and click Enable. The administrator can then add routes by entering their Destination prefix and Prefix size, as shown here.

Class-Based Default Route

The limitation with using Intune to configure routes is that there is currently no option to disable the class-based default route as there is with custom XML. This means the routes shown in the example above will be added to the client, but the class-based route will also be added automatically, as shown here (class-based default route highlighted with the arrow).

Considerations

In most cases, the inclusion of the class-based default route along with the administrator-defined routes will not be a problem. However, in some scenarios, it could yield unexpected results. Specifically, Always On VPN clients may have unintended access to some networks over the VPN tunnel. This is most significant for the Always On VPN device tunnel, where it is common to limit access to only specific resources using individual host routes.

Workaround

Today there is no option to disable the class-based default route using the native Intune UI. Your only option is to deploy the Always On VPN profile using custom XML, as described here.

Additional Information

Deploying Windows 10 Always On VPN with Intune and Custom XML

Deploying Windows 10 Always On VPN Device Tunnel with Intune and Custom XML

Windows 10 Always On VPN Routing Configuration

Windows 10 Always On VPN Device Tunnel Operation and Best Practices

5 Comments

by Richard M. Hicks on March 4, 2021 • Permalink

Posted in Always On VPN, AOVPN, device tunnel, Enterprise, enterprise mobility, InTune, MEMCM, Microsoft Endpoint Manager, Microsoft Intune, Mobility, Operational Support, PowerShell, public cloud, Remote Access, split tunnel, split tunneling, user tunnel, VPN, Windows 10

Posted by Richard M. Hicks on March 4, 2021

https://directaccess.richardhicks.com/2021/03/04/always-on-vpn-class-based-default-route-and-intune/

Always On VPN Updates for Windows 10 2004

Always On VPN Updates for Windows 10 2004 Microsoft recently made available an update for Windows 10 2004 that includes many important fixes for outstanding issues with Windows 10 Always On VPN. KB4571744 (build 19041.488) addresses many challenges faced by Always On VPN administrators today, including the following.

TPM

This update addresses an issue that prevents hash signing from working correctly using the Microsoft Platform Crypto Provider for Trusted Platform Module (TPM). This issue can occur when administrators configure Always On VPN to use Protected Extensible Authentication Protocol (PEAP) with client certificate authentication using a FortiGate security device.

Sleep/Hibernate

This update also addresses issues with Windows 10 Always On VPN failing to automatically reconnect when resuming from sleep or hibernate. I’ve written about issues with Always On VPN and sleep/hibernate in the past. This is an issue that has plagued Always On VPN since its introduction, so let’s hope this finally provides some meaningful relief from this persistent problem.

Certificate Authentication

When both the Always On VPN device tunnel and user tunnel are provisioned to a Windows 10 clients, user tunnel connections may be authenticated using the machine certificate and not EAP/PEAP. This can result in connections that are not validated as intended, and allowing a user to bypass configured NPS policies, MFA requirements, or conditional access rules. This update includes a fix for this issue, restoring proper authentication for the user tunnel when the device tunnel is also provisioned.

Device and User Tunnel Coexistence

A bug that first appeared when Windows 10 2004 was introduced prevented a device tunnel and user tunnel Always On VPN connection from being established to the same VPN server if the user tunnel used Internet Key Exchange Version 2 (IKEv2). This update restores full functionality under those conditions.

Update KB4571744

To resolve these issues with Windows 10 Always On VPN as well as others, download and install update KB4571744 today. If you are experiencing any of these issues with releases of Windows 10 prior to 2004, look for updates for those build to come later this year.

Additional Information

September 3, 2020 – KB4571744 (OS Build 19041.488) Preview

Windows 10 Always On VPN Connection Issues after Sleep or Hibernate

Windows 10 Always On VPN Bug in Windows 10 2004

30 Comments

by Richard M. Hicks on September 7, 2020 • Permalink

Posted by Richard M. Hicks on September 7, 2020

https://directaccess.richardhicks.com/2020/09/07/always-on-vpn-updates-for-windows-10-2004/

Richard M. Hicks Consulting, Inc.

Awards

Pluralsight

Consulting

Newsletter

All posts tagged user tunnel

Always On VPN Error 13801

Error 13801