Always On VPN Certificate Requirements for IKEv2

Always On VPN Certificate Requirements for IKEv2Internet Key Exchange version 2 (IKEv2) is one of the VPN protocols supported for Windows 10 Always On VPN deployments. When the VPN server is Windows Server 2016 with the Routing and Remote Access Service (RRAS) role configured, a computer certificate must first be installed on the server to support IKEv2. There are some unique requirements for this certificate, specifically regarding the subject name and Enhanced Key Usage (EKU) configuration. In addition, some deployment scenarios may require a certificate to be provisioned to the client to support IKEv2 VPN connections.

Server Certificate

The IKEv2 certificate on the VPN server must be issued by the organization’s internal private certification authority (CA). It must be installed in the Local Computer/Personal certificate store on the VPN server. The subject name on the certificate must match the public hostname used by VPN clients to connect to the server, not the server’s hostname. For example, if the VPN server’s hostname is VPN1 and the public FQDN is vpn.example.net, the subject field of the certificate must include vpn.example.net, as shown here.

Always On VPN Certificate Requirements for IKEv2

In addition, the certificate must include the Server Authentication EKU (1.3.6.1.5.5.7.3.1) and the IP security IKE intermediate EKU (1.3.6.1.5.5.8.2.2).

Always On VPN Certificate Requirements for IKEv2

Client Certificate

Client certificate requirements vary depending on the type of VPN tunnel and authentication method being used.

User Tunnel

No certificates are required on the client to support IKEv2 when using MSCHAPv2, EAP-MSCHAPv2, or Protected EAP (PEAP) with MSCHAPv2. However, if the option to verify the server’s identity by validating the certificate is selected when using PEAP, the client must have the certificates for the root CA and any subordinate CAs installed in its Trusted Root Certification and Intermediate Certificate Authorities certificate stores, respectively.

Always On VPN Certificate Requirements for IKEv2

User Tunnel with Certificate Authentication

Using certificate authentication for the user tunnel is the recommended best practice for Always On VPN deployments. A client certificate must be installed in the Current User/Personal store to support PEAP authentication with smart card or certificate authentication. The certificate must include the Client Authentication EKU (1.3.6.1.5.5.7.3.2).

Always On VPN Certificate Requirements for IKEv2

Device Tunnel

A computer certificate must be installed in the Local Computer/Personal certificate store to support IKEv2 machine certificate authentication and the Always On VPN device tunnel. The certificate must include the Client Authentication EKU (1.3.6.1.5.5.7.3.2). Optionally (but recommended), the certificate should also include the IP Security IKE Intermediate EKU (1.3.6.1.5.5.8.2.2).

Always On VPN Certificate Requirements for IKEv2

More information about configuring the Always On VPN device tunnel can be found here.

Additional Information

Always On VPN with Trusted Platform Module (TPM) Certificates

Always On VPN Protocol Recommendations for Windows Server 2016 RRAS

Always On VPN and Windows Server RRAS

Always On VPN Training

Deleting an Always On VPN Device Tunnel

Deleting an Always On VPN Device TunnelWindows 10 Always On VPN supports both a user tunnel for corporate network access, and a device tunnel typically used to provide pre-logon network connectivity and to support manage out scenarios. The process of testing Always On VPN is often an iterative one involving trial and error testing to fine tune the configuration parameters to achieve the best experience. As a part of this process it will often be necessary to delete a connection at some point. For the user tunnel the process is simple and straightforward. Simply disconnect the session and delete the connection in the UI.

Deleting an Always On VPN Device Tunnel

Deleting a device tunnel connection presents a unique challenge though. Specifically, there is no VPN connection in the UI to disconnect and remove. To delete an Always On VPN device tunnel, open an elevated PowerShell window and enter the following command.

Get-VpnConnection -AllUserConnection | Remove-VpnConnection -Force

If the device tunnel is connected when you try to remove it, you will receive the following error message.

The VPN connection [connection_name] cannot be removed from the global user connections. Cannot
delete a connection while it is connected.

Deleting an Always On VPN Device Tunnel

The device tunnel must first be disconnected to resolve this issue. Enter the following command to disconnect the device tunnel.

rasdial.exe [connection_name] /disconnect

Remove the device tunnel connection using PowerShell once complete.

Deleting an Always On VPN Device Tunnel
Additional Resources

Windows 10 Always On VPN Device Tunnel Step-by-Step Configuration using PowerShell

What’s The Difference Between DirectAccess and Always On VPN?

Windows 10 Always On VPN Recommendations for Windows Server 2016 Routing and Remote Access Service (RRAS)

Windows 10 Always On VPN Hands-On Training

DirectAccess IP-HTTPS Performance Issues

DirectAccess IP-HTTPS Performance IssuesPerformance issues with DirectAccess are not uncommon. In fact, there are numerous threads on Microsoft and third-party forums where administrators frequently complain about slow download speeds, especially when using the IP-HTTPS IPv6 transition technology. Based on my experience the problem does not appear to be widespread but occurs with enough regularity that it is worthy of further investigation.

DirectAccess Design

The inherent design of DirectAccess is a major limiting factor for performance. DirectAccess uses a complex and heavy communication channel, with multiple layers of encapsulation, encryption, and translation. Fundamentally it is IPsec encrypted IPv6 traffic, encapsulated in HTTP, and then encrypted with Transport Layer Security (TLS) and routed over IPv4. It is then decrypted, decapsulated, decrypted again, then converted back to IPv4. The high protocol overhead incurred with multiple layers of encapsulation, encryption, and translation result in increased packet fragmentation, which further reduces performance.

DirectAccess Performance

Even under the best circumstances, DirectAccess performance is limited by many other factors, most notably the quality of the network connection between the client and the server. DirectAccess performs reasonably well over high bandwidth, low latency connections. However, network performance drops precipitously as latency increases and packet loss is encountered. This is to be expected given the design of the solution.

Intermediary Devices

It is not uncommon to find intermediary devices like firewalls, intrusion detection systems, malware scanners, and other security inspection devices limit the performance of DirectAccess clients. In addition, many security appliances have bandwidth caps enforced in software for licensing restrictions. Further, incorrect configuration of inline edge devices can contribute to increased fragmentation, which leads to poor performance as well.

Slow Downloads over IP-HTTPS

Many people report that download speeds seem to be artificially capped at 355Kbps. While this seems to be a display bug in the UI, there is plenty of evidence to indicate that, in some scenarios, DirectAccess is incapable of high throughput even over high-quality connections. Some who have deployed DirectAccess and VPN on the same server have reported that download speeds are only limited when using DirectAccess over IP-HTTPS and not with VPN using Secure Socket Tunneling Protocol (SSTP), which also uses TLS. This has led many to speculate that the issue is either a bug or a design flaw in the IP-HTTPS tunnel interface itself.

TCP Window Scaling Issues

In some of the network traces I’ve analyzed I’ve seen evidence that seems to support this theory. For example, a network trace taken when downloading a file over DirectAccess with IP-HTTPS showed the TCP window never scaled beyond 64K, which would seriously impede performance. Interestingly this doesn’t seem to happy when the client uploads files over IP-HTTPS. Clearly something unusual is happening.

Microsoft KB Article

Microsoft recently released a vaguely-worded KB article that appears to lend credence to some of these findings. The article seems to acknowledge the fact there are known issues with DirectAccess performance, but it lacks any specific details as to what the root cause is. Instead, it simply advises migrating to Windows 10 Always On VPN.

Summary

DirectAccess IP-HTTPS performance issues don’t appear to affect everyone, and the problem only seems to apply to file downloads and not to other types of traffic. However, there is mounting evidence of a systemic issue with DirectAccess performance especially over IP-HTTPS. Customers are advised to closely evaluate their uses cases for DirectAccess and if remote clients are frequently required to download large files over a DirectAccess connection, an alternative method of file transfer might be required. Optionally customers can consider evaluating alternative remote access solutions that offer better performance such as Windows 10 Always On VPN or third-party solutions such as NetMotion Mobility.

Additional Resources

Always On VPN and the Future of DirectAccess

What’s the Difference Between DirectAccess and Always On VPN?

NetMotion Mobility as an Alternative to Microsoft DirectAccess