Always On VPN Load Balancing for RRAS in Azure

Always On VPN Load Balancing for RRAS in AzurePreviously I wrote about Always On VPN options for Microsoft Azure deployments. In that post I indicated that running Windows Server with the Routing and Remote Access Service (RRAS) role for VPN was an option to be considered, even though it is not a formally supported workload. Despite the lack of support by Microsoft, deploying RRAS in Azure works well and is quite popular. In fact, I recently published some configuration guidance for RRAS in Azure.

Load Balancing Options for RRAS

Multiple RRAS servers can be deployed in Azure to provide failover/redundancy or to increase capacity. While Windows Network Load Balancing (NLB) can be used on-premises for RRAS load balancing, NLB is not supported and doesn’t work in Azure. With that, there are several options for load balancing RRAS in Azure. They include DNS round robin, Azure Traffic Manager, the native Azure load balancer, Azure Application Gateway, or a dedicated load balancing virtual appliance.

DNS Round Robin

The easiest way to provide load balancing for RRAS in Azure is to use round robin DNS. However, using this method has some serious limitations. Simple DNS round robin can lead to connection attempts to a server that is offline. In addition, this method doesn’t accurately balance the load and often results in uneven distribution of client connections.

Azure Traffic Manager

Using Azure Traffic Manager is another alternative for load balancing RRAS in Azure. In this scenario each VPN server will have its own public IP address and FQDN for which Azure Traffic Manager will intelligently distribute traffic. Details on configuring Azure Traffic Manager for Always On VPN can be found here.

Azure Load Balancer

The native Azure load balancer can be configured to provide load balancing for RRAS in Azure. However, it has some serious limitations. Consider the following.

  • Supports Secure Socket Tunneling Protocol (SSTP) only.
  • Basic health check functionality (port probe only).
  • Limited visibility.
  • Does not work with IKEv2.
  • Does not support TLS offload for SSTP.

More information about the Azure Load Balancer can be found here.

Azure Application Gateway

The Azure Application Gateway can be used for load balancing RRAS SSTP VPN connections where advanced capabilities such as enhanced health checks and TLS offload are required. More information about the Azure Application Gateway can be found here.

Load Balancing Appliance

Using a dedicated Application Delivery Controller (ADC), or load balancer is a very effective way to eliminate single points of failure for Always On VPN deployments hosted in Azure. ADCs provide many advanced features and capabilities to ensure full support for all RRAS VPN protocols. In addition, ADCs offer much better visibility and granular control over VPN connections. There are many solutions available as virtual appliances in the Azure marketplace that can be deployed to provide RRAS load balancing in Azure.

Summary

Deploying Windows Server RRAS in Azure for Always On VPN can be a cost-effective solution for many organizations. Although not a formally supported workload, I’ve deployed it numerous times and it works quite well. Consider using a dedicated ADC to increase scalability or provide failover and redundancy for RRAS in Azure whenever possible.

Additional Information

Windows 10 Always On VPN Options for Azure Deployments

Windows 10 Always On VPN and RRAS in Microsoft Azure

Windows 10 Always On VPN with Microsoft Azure Gateway

Leave a comment

3 Comments

  1. Jason Jones

     /  October 28, 2019

    Azure VPN Gateway or Azure Virtual WAN are the preferred way forward here; this is further strengthened by announcements at Ignite soon…

    Reply
    • Other than the supportability for RRAS on Windows Server in Azure, it’s a good solution IMO. Azure VPN gateway and Virtual WAN both have their own challenges which limit their usefulness for Always On VPN deployments. Definitely looking forward to the announcements coming up on Ignite around this though. 🙂

      Reply
  1. Always On VPN Load Balancing with Kemp in Azure | Richard M. Hicks Consulting, Inc.

Leave a Reply to Richard M. Hicks Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: