All posts in category SSL and TLS

Always On VPN with Azure Gateway

Always On VPN with Azure GatewayRecently I wrote about VPN server deployment options for Windows 10 Always On VPN in Azure. In that post I indicated the native Azure VPN gateway could be used to support Always On VPN connections using Internet Key Exchange version 2 (IKEv2) and Secure Socket Tunneling Protocol (SSTP). In this post I’ll outline the requirements and configuration steps for implementing this solution.

Requirements

To support Always On VPN, point-to-site VPN connections must be enabled on the Azure VPN gateway. Not all Azure VPN gateways are alike, and point-to-site connections are not supported in all scenarios. For Always On VPN, the Azure VPN gateway must meet the following requirements.

VPN SKU

The Azure VPN gateway SKU must be VpnGw1, VpnGw2, VpnGw3, VpnGw1AZ, VpnGw2AZ, or VpnGw3AZ. The Basic SKU is not supported.

VPN Type

The VPN type must be route-based. Policy-based VPN gateways are not supported for point-to-site VPN connections.

Limitations

Using the Azure VPN gateway for Always On VPN may not be ideal in all scenarios. The following limitations should be considered thoroughly before choosing the Azure VPN gateway for Always On VPN.

Device Tunnel

RADIUS/EAP authentication for user tunnel connections is not supported if the Azure VPN gateway is configured to support device tunnel with machine certificate authentication.

Maximum Connections

A maximum of 250, 500, and 1000 concurrent IKEv2 connections are supported when using the VpnGw1/AZ, VpnGw2/AZ, and VpnGw3/AZ SKUs, respectively (x2 for active/active gateway deployments). In addition, a maximum of 128 concurrent SSTP connections are supported for all VPN gateway SKUs (x2 for active/active gateway deployments).

Always On VPN with Azure Gateway

Reference: https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-about-vpngateways#gwsku

RADIUS Requirements

To support Always On VPN connections, the Azure VPN gateway must be configured to authenticate to a RADIUS server. The RADIUS server must be reachable from the VPN gateway subnet. The RADIUS server can be hosted in Azure or on-premises. Before proceeding, ensure that any network routes, firewall rules, and site-to-site VPN tunnel configuration is in place to allow this communication.

RADIUS Configuration

Guidance for configuring Windows Server NPS for Always On VPN can be found here. The only difference when configuring NPS for use with Azure VPN gateway is the RADIUS client configuration.

Open the NPS management console (nps.msc) and follow the steps below to configure Windows Server NPS to support Always On VPN client connections from the Azure VPN gateway.

1. Expand RADIUS Clients and Servers.
2. Right-click RADIUS Clients and choose New.
3. Enter a descriptive name in the Friendly name field.
4. Enter the Azure VPN gateway subnet using CIDR notation in the Address (IP or DNS) field. The gateway subnet can be found by viewing the properties of the Azure VPN gateway in the Azure portal.
5. Enter the shared secret to be used for RADIUS communication in the Shared secret field.

Always On VPN with Azure Gateway

Azure VPN Gateway Configuration

To begin, provision a Virtual Network Gateway in Azure that meets the requirements outlined above. Guidance for implementing an Azure VPN gateway can be found here. Once complete, follow the steps below to enable support for Always On VPN client connections.

Enable Point-to-Site

Perform the following steps to enable point-to-site VPN connectivity.

1. In the navigation pane of the Azure VPN gateway settings click Point-to-site configuration.
2. Click Configure Now and specify an IPv4 address pool to be assigned to VPN clients. This IP address pool must be unique in the organization and must not overlap with any IP address ranges defined in the Azure virtual network.
3. From the Tunnel type drop-down list select IKEv2 and SSTP (SSL).
4. In the RADIUS authentication field enter the IPv4 address of the RADIUS server. At the time of this writing only a single IPv4 address is supported. If RADIUS redundancy is required, consider creating a load balanced NPS cluster.
5. In the Server secret field enter the RADIUS shared secret.
6. Click Save to save the configuration.

Always On VPN with Azure Gateway

VPN Client Configuration

Perform the following steps to configure a Windows 10 VPN client to connect to the Azure VPN gateway.

Download VPN Configuration

1. Click Point-to-site configuration.
2. Click Download VPN client.
3. Select EAPMSCHAv2 (yes, that’s correct even if EAP-TLS will be used!)
4. Click Download.
5. Open the downloaded zip file and extract the VpnSettings.XML file from the Generic folder.
6. Copy the FQDN in the VpnServer element in VpnSettings.XML. This is the FQDN that will be used in the template VPN connection and later in ProfileXML.

Always On VPN with Azure Gateway

Create a Test VPN Connection

On a Windows 10 device create a test VPN profile using the VPN server address copied previously. Configure EAP settings to match those configured on the NPS server and test connectivity.

Create an Always On VPN Connection

Once the VPN has been validated using the test profile created previously, the VPN server and EAP configuration from the test profile can be used to create the Always On VPN profile for publishing using Intune, SCCM, or PowerShell.

IKEv2 Security Configuration

The default IKEv2 security parameters used by the Azure VPN gateway are better than Windows Server, but the administrator will notice that a weak DH key (1024 bit) is used in phase 1 negotiation.

Always On VPN with Azure Gateway

Use the following PowerShell commands to update the default IKEv2 security parameters to recommended baseline defaults, including 2048-bit keys (DH group 14) and AES-128 for improved performance.

Connect-AzAccount
Select-AzSubscription -SubscriptionName [Azure Subscription Name]

$Gateway = [Gateway Name]
$ResourceGroup = [Resource Group Name]

$IPsecPolicy = New-AzVpnClientIpsecParameter -IpsecEncryption AES128 -IpsecIntegrity SHA256 -SALifeTime 28800 -SADataSize 102400000 -IkeEncryption AES128 -IkeIntegrity SHA256 -DhGroup DHGroup14 -PfsGroup PFS14

Set-AzVpnClientIpsecParameter -VirtualNetworkGatewayName $Gateway -ResourceGroupName $ResourceGroup -VpnClientIPsecParameter $IPsecPolicy

Note: Be sure to update the cryptography settings on the test VPN connection and in ProfileXML for Always On VPN connections to match the new VPN gateway settings. Failing to do so will result in an IPsec policy mismatch error.

Additional Information

Microsoft Azure VPN Gateway Overview

About Microsoft Azure Point-to-Site VPN

Windows 10 Always On VPN IKEv2 Security Configuration

 

 

 

76 Comments
by Richard M. Hicks on August 26, 2019  •  Permalink
Posted in Always On VPN, AOVPN, Azure, Azure VPN, Azure VPN Gateway, cloud, device tunnel, Enterprise, enterprise mobility, IKEv2, Intune, Microsoft Intune, Mobility, network policy server, NPS, PowerShell, ProfileXML, Remote Access, Security, SSL, SSL and TLS, SSTP, TLS, user tunnel, VPN, Windows 10, XML
Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Posted by Richard M. Hicks on August 26, 2019

https://directaccess.richardhicks.com/2019/08/26/always-on-vpn-with-azure-gateway/

Always On VPN SSTP Load Balancing with Kemp LoadMaster

Always On VPN SSTP Load Balancing with Kemp LoadMaster The Windows Server Routing and Remote Access Service (RRAS) includes support for the Secure Socket Tunneling Protocol (SSTP), which is a Microsoft proprietary VPN protocol that uses SSL/TLS for security and privacy of VPN connections. The advantages of using SSTP for Always On VPN is that it is firewall friendly and ensures consistent remove connectivity even behind highly restrictive firewalls.

Load Balancing SSTP

In a recent post, I described some of the use cases and benefits of SSTP load balancing as well as the offloading of TLS for SSTP VPN connections. Using a load balancer for SSTP VPN connections increases scalability, and offloading TLS for SSTP reduces resource utilization and improves performance for VPN connections. There are positive security benefits too.

Note: A comprehensive reference with detailed, prescriptive guidance for configuring the Kemp LoadMaster for Always On VPN can be found in the Always On VPN Load Balancing Deployment Guide for Kemp Load Balancers. Download this free guide now!

Configuration

Enabling load balancing on the Kemp LoadMaster platform is fundamentally similar to load balancing HTTPS web servers. However, there are a few subtle but important differences.

Health Check

Using a standard TCP port check on the LoadMaster will not accurately reflect the health of the SSTP service running on the RRAS server. In addition, using a simple TCP port check could yield unexpected results. To ensure accurate service status monitoring, it is recommended that HTTP or HTTPS health checks be configured instead.

Real Server Check Method

Open the Kemp LoadMaster management console and follow the steps below to enable HTTP/HTTPS health checks for SSTP.

1. Expand Virtual Services in the navigation pane.
2. Click View/Modify Services.
3. Click Modify on the SSTP VPN virtual service.
4. Expand Real Servers.
5. Select HTTPS Protocol from the Real Server Check Method drop-down list. Alternatively, if TLS offload is enabled select HTTP Protocol.
6. In the URL field enter /sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}/ and click Set URL.
7. In the Status Codes field enter 401 and click Set Status Codes.
8. Check the box next to Use HTTP/1.1.
9. Select Head from the HTTP Method drop-down list.

Always On VPN SSTP Load Balancing with Kemp LoadMaster

TLS Offload

It is generally recommended that TLS offload not be enabled for SSTP VPN. However, if TLS offload is desired, it is configured in much the same way as a common HTTPS web server. Specific guidance for enabling TLS offload on the Kemp LoadMaster load balancer can be found in the Always On VPN Load Balancing Deployment Guide for Kemp Load Balancers. Details for configuring RRAS and SSTP to support TLS offload can be found here.

Certificates

When enabling TLS offload for SSTP VPN connections it is recommended that the public SSL certificate be installed on the RRAS server, even though TLS processing will be handled on the LoadMaster and HTTP will be used between the LoadMaster and the RRAS server. If installing the public SSL certificate on the RRAS server is not an option, additional configuration will be required. Specifically, TLS offload for SSTP must be configured using the Enable-SSTPOffload PowerShell script, which can be found here.

Once the script has been downloaded, open an elevated PowerShell command window and enter the following command.

Enable-SSTPOffload -CertificateHash [SHA256 Certificate Hash of Public SSL Certificate] -Restart

Example:

Enable-SSTPOffload -CertificateHash “C3AB8FF13720E8AD9047DD39466B3C8974E592C2FA383D4A3960714CAEF0C4F2” -Restart

Re-Encryption

When offloading TLS for SSTP VPN connections, all traffic between the LoadMaster and the RRAS server will be sent in the clear using HTTP. In some instances, TLS offload is required only for traffic inspection, not performance gain. In this scenario the LoadMaster will be configured to terminate and then re-encrypt connections to the RRAS server. When terminating TLS on the LoadMaster and re-encrypting connections to the RRAS server is required, the same certificate must be used on both the LoadMaster and the RRAS server. Using different certificates on the RRAS server and the load balancer is not supported.

Additional Information

Windows 10 Always On VPN Load Balancing Deployment Guide for Kemp Load Balancers

Windows 10 Always On VPN SSTP Load Balancing and SSL Offload

Windows 10 Always On VPN SSL Certificate Requirements for SSTP

Windows 10 Always On VPN ECDSA SSL Certificate Request for SSTP

Windows 10 Always On VPN SSTP Connects then Disconnects

Windows 10 Always On VPN SSTP Load Balancing with F5 BIG-IP

6 Comments
by Richard M. Hicks on July 8, 2019  •  Permalink
Posted in ADC, Always On VPN, AOVPN, application delivery controller, certificates, Enterprise, enterprise mobility, High Availability, Kemp, Load Balancing, LoadMaster, Mobility, Remote Access, routing and remote access service, RRAS, Security, SSL, SSL and TLS, SSTP, Windows 10, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Tagged , , , , , , , , , , , , , , , , , , , , , , , ,

Posted by Richard M. Hicks on July 8, 2019

https://directaccess.richardhicks.com/2019/07/08/always-on-vpn-sstp-load-balancing-with-kemp-loadmaster/

Always On VPN SSTP Load Balancing with F5 BIG-IP

Always On VPN SSTP Load Balancing with F5 BIG-IP The Windows Server Routing and Remote Access Service (RRAS) includes support for the Secure Sockets Tunneling Protocol (SSTP), which is a Microsoft proprietary VPN protocol that uses SSL/TLS for security and privacy of VPN connections. The advantage of using SSTP for Always On VPN is that it is firewall friendly and ensures consistent remote connectivity even behind highly restrictive firewalls.

Load Balancing SSTP

In a recent post, I described some of the use cases and benefits of SSTP load balancing as well as the offloading of TLS for SSTP VPN connections. Using a load balancer for SSTP VPN connections increases scalability, and offloading TLS for SSTP reduces resource utilization and improves performance for VPN connections. There are positive security benefits too.

Configuration

Enabling load balancing for SSTP on the F5 BIG-IP load balancer is fundamentally similar to load balancing HTTPS web servers. However, there are a few subtle but important differences.

Default Monitor

The default HTTP and HTTPS monitors on the F5 will not accurately reflect the health of the SSTP service running on the RRAS server. In addition, using a simple TCP port monitor could yield unexpected results. To ensure accurate service status monitoring, a new custom monitor must be created to validate the health of the SSTP service.

Custom SSTP Monitor

Open the F5 BIG-IP management console and follow the steps below to create and assign a new custom monitor for SSTP.

Create Monitor

1. In the navigation tree highlight Local Traffic.
2. Click Monitors.
3. Click Create.

Always On VPN SSTP Load Balancing with F5 BIG-IP

4. Enter a descriptive name in the Name field and from the Type drop-down list choose HTTP if TLS offload is enabled, or HTTPS if it is not.
5. In the Send String field enter HEAD /sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}/ HTTP/1.1\r\nHost:r\nConnection: Close\r\n\r\n.
6. In the Receive String field enter HTTP/1.1 401.
7. Click Finished.

Always On VPN SSTP Load Balancing with F5 BIG-IP

Assign Monitor

1. Below Local Traffic click Pools.
2. Click on the SSTP VPN server pool.
3. In the Health Monitors section select the SSTP VPN health monitor from the Available list and make it Active.
4. Click Update.

Always On VPN SSTP Load Balancing with F5 BIG-IP

CLI Configuration

If you prefer to configure the SSTP VPN monitor using the F5’s Command Line Interface (CLI), you can download the monitor configuration from my GitHub here.

TLS Offload

It is generally recommended that TLS offload not be enabled for SSTP VPN. However, if TLS offload is desired, it is configured in much the same way as a common HTTPS web server. Specific guidance for enabling TLS offload on the F5 BIG-IP can be found here. Details for configuring RRAS and SSTP to support TLS offload can be found here.

Certificates

When enabling TLS offload for SSTP VPN connections it is recommended that the public SSL certificate be installed on the RRAS server, even though TLS processing will be handled on the F5 and HTTP will be used between the F5 and the RRAS server. If installing the public SSL certificate on the RRAS server is not an option, additional configuration will be required. Specifically, TLS offload for SSTP must be configured using the Enable-SSTPOffload PowerShell script, which can be found here.

Once the script has been downloaded, open an elevated PowerShell command window and enter the following command.

Enable-SSTPOffload -CertificateHash [SHA256 Certificate Hash of Public SSL Certificate] -Restart

Example:

Enable-SSTPOffload -CertificateHash “C3AB8FF13720E8AD9047DD39466B3C8974E592C2FA383D4A3960714CAEF0C4F2” -Restart

Re-Encryption

When offloading TLS for SSTP VPN connections, all traffic between the F5 and the RRAS server will be sent in the clear using HTTP. In some instances, TLS offload is required only for traffic inspection, not performance gain. In this scenario the F5 will be configured to terminate and then re-encrypt connections to the RRAS server. When terminating TLS on the F5 and re-encrypting connections to the RRAS server is required, the same certificate must be used on both the F5 and the RRAS server. Using different certificates on the RRAS server and the load balancer is not supported.

Additional Information

Windows 10 Always On VPN SSTP Load Balancing and SSL Offload

Windows 10 Always On VPN SSL Certificate Requirements for SSTP

Windows 10 Always On VPN ECDSA SSL Certificate Request for SSTP

Windows 10 Always On VPN SSTP Connects then Disconnects

Windows 10 Always On VPN Load Balancing Deployment Guide for Kemp Load Balancers

 

23 Comments
by Richard M. Hicks on June 17, 2019  •  Permalink
Posted in ADC, Always On VPN, AOVPN, application delivery controller, BIG-IP, certificates, Encryption, Enterprise, enterprise mobility, F5, High Availability, Load Balancing, local traffic manager, LTM, Mobility, PowerShell, Remote Access, routing and remote access service, RRAS, Security, SSL, SSL and TLS, SSTP, TLS, VPN, Windows 10, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Posted by Richard M. Hicks on June 17, 2019

https://directaccess.richardhicks.com/2019/06/17/always-on-vpn-sstp-load-balancing-with-f5-big-ip/

« Older Posts
Newer Posts »