Always On VPN Trusted Network Detection and Native Azure AD Join

Administrators deploying Microsoft Always On VPN are quickly learning that the native Azure Active Directory join (AADJ) model has significant advantages over the more traditional Hybrid Azure AD join (HAADJ) scenario. Native AADJ is much simpler to deploy and manage than HAADJ while still allowing full single sign-on (SSO) to on-premises resources for remote users. Intune even allows for the import of custom ADMX and ADML administrative templates, further reducing the dependency on on-premises Active Directory for device management.

Remote Management

Although devices aren’t joined to the domain, administrators may still wish to access those clients connected to their network for device discovery or to perform administrative tasks. However, when native AADJ clients connect via Always On VPN, the Public Windows firewall profile is assigned to the VPN tunnel adapter. The Public profile is, of course, more restrictive and blocks most management protocols by default.

Firewall Rules

While adding firewall rules to the Public profile to allow management protocols is possible, this isn’t recommended for security reasons. The Public profile is typically loaded when the device is on an untrusted network. Exposing management protocols on an insecure network is asking for trouble.

Domain Profile

Domain-joined or Hybrid AADJ endpoints will use the Domain Windows firewall profile. This profile is more permissive, allowing many standard management protocols by default. Also, administrators can add rules to allow additional access as required without increasing the risk for devices on untrusted networks.

Trusted Network Detection

So, the trick is to get a native AADJ endpoint to load the Domain profile for the VPN tunnel adapter when connected via Always On VPN. Trusted Network Detection is accomplished by using settings configured on the endpoint using the NetworkListManager Configuration Service Provider (CSP).

Intune and XML

There are two settings administrators can enable AADJ devices to detect a trusted network and load the Domain Windows firewall profile. Unfortunately, these settings can only be applied using Intune and the Custom XML template. Administrators will use the following OMA-URI settings.

AllowedTlsAuthenticationEndpoints

The AllowedTlsAuthenticationEndpoints policy setting defines the URL the device uses to validate a trusted network. The target must be an on-premises web server with a valid TLS certificate using HTTPS. The target must be a highly available internal resource inaccessible from the Internet. DirectAccess administrators will be quite familiar with this concept; it’s the Network Location Server (NLS)!

Use the following OMA-URI to configure the TLS authentication endpoint.

URI: ./Device/Vendor/MSFT/Policy/Config/
NetworkListManager/AllowedTlsAuthenticationEndpoints

String: <![CDATA[https://nls.corp.example.net]]>

ConfiguredTlsAuthenticationNetworkName

The ConfiguredTlsAuthenticationNetworkName policy setting is optional. Administrators can use this setting to provide a friendly name for the authenticated trusted network. The FQDN of the target resource (NLS) is used by default. However, using this setting overrides the default with something more meaningful.

Use the following OMA-URI to configure the TLS authentication network name.

URI: ./Device/Vendor/MSFT/Policy/Config/
NetworkListManager/ConfiguredTlsAuthenticationNetworkName

String: <Friendly network name>

Results

Once configured, you’ll find the Always On VPN tunnel adapter uses the Domain Windows firewall profile and an optional friendly network name.

Additional Information

Deploying Always On VPN with Intune using Custom XML and CSP

Always On VPN CSP Updates

Always On VPN and VpnStrategy with CSP

Always On VPN and Device Sharing

Always On VPN client configuration settings are typically deployed in the user’s context. However, this presents a unique challenge when sharing a single device with multiple users who have an Always On VPN profile assigned to them. By design, Windows designates only a single user profile on a shared device to be “always on”. When multiple users with assigned Always On VPN profiles share the same machine, it could yield unexpected results.

Auto Trigger Profile

When an Always On VPN profile is provisioned to a user, Windows records information about this profile in the registry. Specifically, the Always On VPN profile’s name and GUID are recorded, as well as the user’s Security Identifier (SID) and the path to the rasphone.pbk file that contains the Always On VPN profile.

Multiple Users

When a new user logs on to a shared device and receives their Always On VPN profile, Windows overwrites this existing data in the registry with the current user’s information. Each time this user logs on, their Always On VPN connection will establish automatically. Any other users with Always On VPN profiles configured on the same shared device will no longer connect automatically after this. The most recently deployed Always On VPN profile will be designated the “always on” profile.

Connect Automatically

In the above scenario, any user with an assigned Always On VPN profile on the shared device can take over the “always on” designation by opening the VPN connection properties and checking the “Connect automatically” check box.

When this happens, this user will now own the “always on” profile, and other users on the shared device will no longer connect automatically.

Workarounds

If multiple users share a single device requiring Always On VPN connectivity, you have a few options.

Intune

If you are deploying Always On VPN client configuration settings using Intune, you must use the Custom device configuration profile template. Specifically, as shown here, you must deploy your XML configuration file using the ./Device/Vendor/MSFT/VPNv2/ OMA-DM URI.

Unfortunately, the native Intune VPN template does not support deploying Always On VPN profiles in the “all users” context.

PowerShell

When using PowerShell, either natively or with SCCM or another software deployment tool, administrators can use my Always On VPN deployment PowerShell script with the -AllUserConnection parameter.

PowerON DPC

When using PowerON Platforms’ Dynamic Profile Configurator (DPC) to deploy Always On VPN client configuration settings using on-premises Active Directory or via Intune, no changes are required. DPC deploys Always On VPN user profiles in the “all users” context by default.

Additional Information

New-AovpnConnection.ps1 PowerShell Script on GitHub

PowerON Platforms’ Dynamic Profile Configurator (DPC)

Always On VPN DPC with PowerON Platforms’ DPC

Always On VPN CSP Updates

Always On VPN DNS Registration Update Available

Administrators can deploy Always On VPN client configuration settings in several ways. The simplest method is to use the native Microsoft Intune UI and the VPN device configuration profile template. Optionally, administrators can create an XML file that can be deployed with Intune using the Custom template. In addition, the XML file can be deployed using PowerShell, either interactively or with System Center Configuration Manager (SCCM). Administrators can also deploy the XML file using PowerShell via Active Directory group policy startup script or another software provisioning platform.

Custom XML

While using the native Intune VPN device configuration template to deploy and manage Always On VPN client configuration settings is easy and convenient, it lacks support for many crucial configuration settings. Deploying Always On VPN client settings using the Custom template is helpful to overcome these limitations as it enables additional configuration settings not exposed in the Intune VPN template.

VPNv2CSP

The VPNv2 Configuration Service Provider (CSP) is the interface used by Intune to deploy Always On VPN client configuration settings to the endpoint. The WMI-to-CSP bridge enables settings deployment using PowerShell. In either scenario, administrators must create an XML file that includes the settings used for the Always On VPN profile. A reference for all supported settings in the VPNv2 CSP can be found here.

New Settings

Microsoft recently introduced some new settings in the VPNv2 CSP. Beginning with Windows 11 22H2, administrators can disable the disconnect button and prevent access to the advanced settings menu for device and user tunnels in the Windows UI by adding the following entries in the XML configuration file.

<DisableDisconnectButton>true</DisableDisconnectButton>

<DisableAdvancedOptionsEditButton>true
</DisableAdvancedOptionsEditButton>

Additional Updates

Microsoft also added options to define encryption settings, disable IKEv2 fragmentation support, update IPv4 and IPv6 interface metrics, adjust IKEv2 network outage time, and disable the use of RAS credentials in XML for device and user tunnels. These new options eliminate the need to use Intune Proactive Remediation to adjust these VPN client configuration settings post-deployment.

Unfortunately, these settings are not supported in any current release of Windows 10 or 11 today. However, they are available in the latest Windows Insider build (development channel) if you want to test them. I’ve provided example settings below. These settings will be supported in a public release of Windows in the future.

<DataEncryption>Max</DataEncryption>
<DisableIKEv2Fragmentation>true</DisableIKEv2Fragmentation>
<IPv4InterfaceMetric>3</IPv4InterfaceMetric>
<IPv6InterfaceMetric>3</IPv6InterfaceMetric>
<NetworkOutageTime>0</NetworkOutageTime>
<UseRasCredentials>false</UseRasCredentials>

Note: At the time of this writing, the VPNv2 CSP indicates these settings apply to Windows 11 21H2 and later. That is incorrect. Microsoft is aware of the issue and will hopefully correct it soon.

Intune Support

At some point, Microsoft may add these features to the Intune VPN device configuration template. However, XML with the Custom template is the only way to enable these new settings today.

Additional Information

Always On VPN VPNv2 CSP Reference

Deploying Always On VPN with Intune using Custom ProfileXML

Always On VPN and Intune Proactive Remediation

Microsoft Intune Learning Resources for Always On VPN Administrators

Example Always On VPN User Tunnel ProfileXML

Example Always On VPN Device Tunnel ProfileXML

Always On VPN PowerShell Script Issues in Windows 11

Many administrators are now beginning to test Always On VPN functionality on the latest Microsoft Windows client operating system, Windows 11. Initially, Microsoft had some issues with provisioning and managing Always On VPN profiles on Windows 11 using Microsoft Intune, but those have been resolved. However, some lingering problems may delay enterprise deployments of Always On VPN on Windows 11 for some organizations, specifically those using PowerShell with Active Directory group policy startup scripts or Configuration Manager.

Important Note: The issues outlined in this article have been resolved! The fix for the WMI enumeration bug is addressed in the following updates:

Windows 11 21H2 – KB5022905 (build 22000.1641)

Windows 11 22H2 – KB5026446 (build 22621.1778)

MakeProfile.ps1

Microsoft has published guidance for deploying Always On VPN profiles using PowerShell with their MakeProfile.ps1 script. This script extracts configuration details from a template VPN profile to create another PowerShell script called VPN_Profile.ps1, which is used to create the Always On VPN profile. Configuration Manager administrators commonly use VPN_Profile.ps1 to deploy Always On VPN profiles. However, running this script on Windows 11 fails and returns the following error message.

“Unable to create [VPN profile name] profile: A general error occurred that is not covered by a more specific code.”

PowerShell error stating the VPN profile cannot be created because a general error occurred

This issue appears to be related to a problem with the WMI-to-CSP bridge, specifically enumerating the MDM_VPNv2_01 class in the root\cimv2\mdm\dmmap namespace. Here you can see the template VPN profile with PowerShell and Get-VpnConnection.

Get-VpnConnection output showing the VPN profile

However, attempts to view the MDM_VPNv2_01 class of this VPN profile using PowerShell and Get-CimInstance fail.

Get-CimInstance query of the MDM_VPNv2_01 class failing

New-AovpnConnection.ps1

Interestingly, administrators may find that my Always On VPN PowerShell deployment script works more reliably on Windows 11, although not always. In my experience, I’ve found that it sometimes fails once (profile is loaded, but the configuration is incomplete), then works after deleting the profile and creating it again. If the Microsoft-provided script isn’t working, give mine a try and see if it works better for you.

Note: When deploying Always On VPN profiles using my PowerShell deployment script via Active Directory startup scripts, it seems to fail consistently for some reason. Go figure. 😉

Remove-AovpnConnection.ps1

The issues described previously with Windows 11 are also negatively affecting some of my other PowerShell scripts. For example, running Remove-Aovpnconnection.ps1 on Windows 11 fails and returns the following error message.

“A general error occurred that is not covered by a more specific error code.”

New-AovpnConnection.ps1 failing on Windows 11 with a general error

Current Status

Microsoft is currently aware of this issue. However, I am aware of no timeframe for resolution at the time of this writing. Hopefully, Microsoft addresses this soon so organizations can move forward with their Windows 11 migration projects.

Additional Information

Always On VPN: Secure Remote Access for Windows

Microsoft Windows Always On VPN Windows 11 Issues with Microsoft Intune

Microsoft Windows Always On VPN Profile Deployment Script

Microsoft Windows Always On VPN Remove Always On VPN Profile Script

Always On VPN PowerShell Script Repository on GitHub

Always On VPN Windows 11 Issues with Intune

Since the introduction of Windows 11, there have been numerous reports of issues with Always On VPN when deployed using Microsoft Intune. Specifically, administrators have been reporting that Always On VPN profiles are being deleted, then later reappearing. Obviously, this is highly disruptive to users in the field.

Update January 25, 2022: Microsoft has released a fix for the issues described in this article. It is included with KB5008353 (build 22000.469).

Causes

According to Microsoft, there are several causes for deleted VPN profiles.

Changes to an Existing Profile

Missing Always On VPN profiles commonly occurs when updating settings for an existing VPN profile applied to Windows 11 endpoints. In this scenario, the VPN profile is deleted but not immediately replaced. Synchronize the device with Microsoft Intune once more to return the VPN profile.

Multiple Profiles

Issues with Always On VPN profiles may also occur if two new VPN profiles are applied to the endpoint simultaneously.

Remove and Replace

Removing and replacing an Always On VPN profile at the same time will also result in connectivity issues.

Microsoft Intune documentation describing known issues with VPN profiles on Windows 11

Reference: https://learn.microsoft.com/en-us/mem/intune/configuration/vpn-settings-configure

Workaround

There is no known workaround for these issues at this time. Microsoft is aware of the problem and is working on a fix, and until then, rolling out Windows 11 with Always On VPN should be avoided.

Additional Issues

There have been reports of other known issues with Windows 11 and Always On VPN. For instance, my PowerShell script that removes an Always On VPN connection doesn’t work with Windows 11. I’m working to resolve that issue as we speak.

Are you experiencing any issues with Always On VPN on Windows 11? Please share them in the comments below!

Additional Information

Always On VPN: Secure Remote Access for Windows

Always On VPN Disconnects in Windows 11

Always On VPN PowerShell Script Issues in Windows 11

Microsoft Intune NDES Connector Setup Wizard Ended Prematurely

Microsoft Intune NDES Connector Setup Wizard Ended PrematurelyA Windows Server with the Network Device Enrollment Service (NDES) role can be provisioned on-premises to support certificate deployment for non-domain Windows 10 Always On VPN clients. In addition, the Microsoft Intune Connector must be installed and configured on the NDES server to allow Intune-managed clients to request and receive certificates from the on-premises Certification Authority (CA) server.

Setup Wizard Ended Prematurely

When installing the Microsoft Intune Connector, the administrator may encounter a scenario where the setup wizard fails with the following error message.

“Microsoft Intune Connector Setup Wizard ended prematurely because of an error. Your system has not been modified. To install this program at a later time, run Setup Wizard again. Click the Finish button to exit the Setup Wizard.”

Microsoft Intune NDES Connector Setup Wizard Ended Prematurely

Cryptographic Service Provider

This error can occur if the NDES server certificate template is configured to use the Key Storage Provider cryptography service provider (CSP). When configuring the certificate template for the NDES server, the Legacy Cryptography Service Provider must be used, as shown here.

Microsoft Intune NDES Connector Setup Wizard Ended Prematurely

Additional Information

Deploying Windows 10 Always On VPN with Intune using Custom ProfileXML

Windows 10 Always On VPN Device Tunnel Configuration using Microsoft Intune

Deploying Windows 10 Always On VPN with Microsoft Intune

 

Deploying Always On VPN with Intune using Custom ProfileXML

When deploying Always On VPN using Microsoft Intune, administrators have two choices for configuring VPN profiles. They can use the native Intune user interface (UI) or create and upload a custom ProfileXML. The method chosen will depend on which features and settings are required.

Microsoft Intune

Intune has an intuitive user interface (UI) that can be used to configure and deploy Always On VPN profiles to Windows clients. Guidance for using the UI to deploy Always On VPN with Microsoft Intune can be found here. However, Intune does not expose all Always On VPN settings to the administrator, which can be problematic.

Missing from Intune

At the time of this writing (updated March 2021), the following Always On VPN settings cannot be configured natively using the Intune UI.

  • Disable class-based default route
  • Exclusion routes
  • LockDown Mode
  • IPv6 routing (broken in Intune)

To implement any of the above features or settings the administrator must create and upload a custom ProfileXML.

ProfileXML

ProfileXML is a node within the VPNv2 Configuration Service Provider (CSP). When configuring Always On VPN using the Intune UI, each setting is configured individually. By contrast, the ProfileXML node includes all Always On VPN settings in a single configuration file. It can be deployed using Intune or PowerShell. Sample ProfileXML files for both user and device tunnels can be downloaded from my GitHub repository.

ProfileXML and Intune

I’ve already documented how to deploy an Always On VPN device tunnel configuration using Intune, so this post will focus on deploying the user tunnel using ProfileXML.

Once ProfileXML has been configured, open the Microsoft Intune admin center and follow the steps below to deploy it using Intune.
Update: The Intune admin center has changed since this post was published. Today, go to Devices > Configuration, select Create > New Policy, choose the Windows 10 and later platform, and select Templates > Custom. The OMA-URI settings below are unchanged.

Create Profile

1. In the navigation pane click Device Configuration.
2. Click Profiles.
3. Click Create Profile.
4. Enter a descriptive name for the new VPN profile.
5. Select Windows 10 and later from the Platform drop-down list.
6. Select Custom from the Profile type drop-down list.

Custom OMA-URI Settings

1. In the Custom OMA-URI Settings blade click Add.
2. Enter a descriptive name in the Name field (this name will appear in the Windows UI on the client).
3. Enter ./User/Vendor/MSFT/VPNv2/Always%20On%20VPN/ProfileXML in the OMA-URI field. I’ve used Always On VPN as an example here, but you can use any text you like. If it includes spaces they must be escaped using %20, as shown here. Also, don’t forget to include the leading “.“.
4. Select String (XML file) from the Data type drop-down list.
5. Click the folder next to the Select a file field and select your ProfileXML file.
6. Click Ok.

Intune custom OMA-URI setting for the Always On VPN ProfileXML using the String (XML file) data type

Important Note: The File contents window must show the contents of your ProfileXML. If the contents are unreadable the XML file contains encoding that will not work. If this happens, copy the contents of your ProfileXML to another new text file and upload again.

Assign Profile

Follow the steps below to assign the Always On VPN profile to the appropriate user group.

1. Click Assignments.
2. Click Select groups to include.
3. Select the group that includes the target users.
4. Click Select.
5. Click Save.

Assigning the custom Always On VPN profile to a user group in Intune

Demonstration Video

A demonstration video with guidance for deploying a Always On VPN user tunnel using the native Microsoft Intune UI as well as custom ProfileXML can be found here. The custom ProfileXML guidance starts at 7:52.

Additional Information

Always On VPN: Secure Remote Access for Windows

Deploying Always On VPN with Microsoft Intune

Deploying Always On VPN Device Tunnel using PowerShell

Always On VPN IKEv2 Security Configuration

Always On VPN LockDown Mode

Always On VPN Scripts and Sample ProfileXML Files on GitHub

Always On VPN ProfileXML Editing and Formatting with Visual Studio Code

Always On VPN ProfileXML Editing and Formatting with Visual Studio CodeWindows 10 Always On VPN is designed to be implemented and managed using a Mobile Device Management (MDM) platform such as Microsoft Intune. With Intune specifically, there is an option to configure an Always On VPN profile in the UI. However, it provides only limited support and does not include all settings and options required for many deployments. Crucially, IKEv2 advanced security settings cannot be configured using the Intune portal. Also, there is currently no option for configuring a device tunnel with Intune. In these scenarios the administrator must manually create a ProfileXML file and provision it using Intune, System Center Configuration Manager (SCCM), or PowerShell.

ProfileXML

ProfileXML includes all settings that define the Always On VPN connection. The options and settings available are documented in the VPNv2 Configuration Service Provider (CSP) reference on Microsoft’s web site. ProfileXML is formatted using elements and settings within those elements. The formatting and syntax are critical to ensuring proper operation. Any error in syntax or formatting can result in an error, such as those described here.

XML Readability

Formatting is also important for readability, which is often helpful when reviewing configuration settings or troubleshooting syntax errors. For example, an element may be defined correctly but may be nested wrong. Often XML files are created with all text being left-justified, or with everything on a single line, making the content difficult to read. Using a file editor that recognizes XML files can be beneficial.

Visual Studio Code

To create, edit, and review ProfileXML it is recommended that a proper editing tool be used. I recommend using Microsoft’s Visual Studio Code. It is free, and it is especially helpful when editing XML files. Visual Studio Code can be downloaded here.

XML Tools VS Code Plug-In

To further enhance Visual Studio Code’s XML editing and formatting capabilities I recommend installing the XML Tools plug-in. This tool extends the native features of VS code for handling XML files. One important thing it adds is a formatting feature that will make your ProfileXML much easier to manage. The XML Tools plug-in for VS Code can be downloaded here.

XML Formatting

Once the XML Tools plug-in for VS code has been installed, formatting XML for readability is straightforward. Simply right-click anywhere in the document and choose Format Document.

Always On VPN ProfileXML Editing and Formatting with Visual Studio CodeOnce complete, the XML document will be formatted with proper indenting and nesting of elements, as shown here.

Always On VPN ProfileXML Editing and Formatting with Visual Studio CodeSummary

Formatting and syntax must be strictly adhered to when creating a ProfileXML file for Windows 10 Always On VPN. Using Visual Studio Code with the XML Tools plug-in allow the administrator to create and edit XML with proper formatting, which greatly improves readability and allows for streamlined configuration review and troubleshooting.

Acknowledgements

Special thanks to Colin, an avid reader of the articles on this web site for this tip. Thanks, Colin! 🙂

Additional Information

Always On VPN and DirectAccess Scripts and Sample Files on GitHub

Always On VPN IKEv2 Security Configuration

Always On VPN Device Tunnel Step-by-Step Configuration using PowerShell

Always On VPN Hands-On Training Classes in 2019

Always On VPN and the Name Resolution Policy Table (NRPT)

The Name Resolution Policy Table (NRPT) is a function of the Windows client and server operating systems that allows administrators to enable policy-based name resolution request routing. Instead of sending all name resolution requests to the DNS server configured on the computer’s network adapter, the NRPT can be used to define unique DNS servers for specific namespaces.

DirectAccess administrators will be intimately familiar with the NRPT, as it is explicitly required for DirectAccess operation. Use of the NRPT for Always On VPN is optional, however. It is commonly used for deployments where split DNS is enabled. Here the NRPT can define DNS servers for the internal namespace, and exclusions can be configured for FQDNs that should not be routed over the VPN tunnel.

To enable the NRPT for Always On VPN, edit the ProfileXML to include the DomainNameInformation element.

<DomainNameInformation>
   <DomainName>.example.net</DomainName>
   <DnsServers>10.21.12.100,10.21.12.101</DnsServers>
</DomainNameInformation>

Note: Be sure to include the leading “.” in the domain name to ensure that all hosts and subdomains are included.

To create an NRPT exclusion simply omit the DnsServers element. Define additional entries for each hostname to be excluded, as shown here.

<DomainNameInformation>
   <DomainName>www.example.net</DomainName>
</DomainNameInformation>
<DomainNameInformation>
   <DomainName>mail.example.net</DomainName>
</DomainNameInformation>
<DomainNameInformation>
   <DomainName>autodiscover.example.net</DomainName>
</DomainNameInformation>

Additional Information

Always On VPN: Secure Remote Access for Windows

VPNv2 Configuration Service Provider (CSP) Reference

Always On VPN Protocol Recommendations for Windows Server Routing and Remote Access Services (RRAS)

Always On VPN Hands-On Training