All posts in category Hotfix

Always On VPN Updates for Windows 10 2004

Always On VPN Updates for Windows 10 2004Microsoft recently made available an update for Windows 10 2004 that includes many important fixes for outstanding issues with Windows 10 Always On VPN. KB4571744 (build 19041.488) addresses many challenges faced by Always On VPN administrators today, including the following.

TPM

This update addresses an issue that prevents hash signing from working correctly using the Microsoft Platform Crypto Provider for Trusted Platform Module (TPM). This issue can occur when administrators configure Always On VPN to use Protected Extensible Authentication Protocol (PEAP) with client certificate authentication using a FortiGate security device.

Sleep/Hibernate

This update also addresses issues with Windows 10 Always On VPN failing to automatically reconnect when resuming from sleep or hibernate. I’ve written about issues with Always On VPN and sleep/hibernate in the past. This is an issue that has plagued Always On VPN since its introduction, so let’s hope this finally provides some meaningful relief from this persistent problem.

Certificate Authentication

When both the Always On VPN device tunnel and user tunnel are provisioned to a Windows 10 clients, user tunnel connections may be authenticated using the machine certificate and not EAP/PEAP. This can result in connections that are not validated as intended, and allowing a user to bypass configured NPS policies, MFA requirements, or conditional access rules. This update includes a fix for this issue, restoring proper authentication for the user tunnel when the device tunnel is also provisioned.

Device and User Tunnel Coexistence

A bug that first appeared when Windows 10 2004 was introduced prevented a device tunnel and user tunnel Always On VPN connection from being established to the same VPN server if the user tunnel used Internet Key Exchange Version 2 (IKEv2). This update restores full functionality under those conditions.

Update KB4571744

To resolve these issues with Windows 10 Always On VPN as well as others, download and install update KB4571744 today. If you are experiencing any of these issues with releases of Windows 10 prior to 2004, look for updates for those build to come later this year.

Additional Information

September 3, 2020 – KB4571744 (OS Build 19041.488) Preview

Windows 10 Always On VPN Connection Issues after Sleep or Hibernate

Windows 10 Always On VPN Bug in Windows 10 2004

30 Comments
by Richard M. Hicks on September 7, 2020  •  Permalink
Posted in Always On VPN, AOVPN, authentication, certificates, device tunnel, Enterprise, enterprise mobility, Hotfix, IKEv2, MFA, Mobility, Multifactor Authentiction, network policy server, NPS, Operational Support, PKI, Remote Access, routing and remote access service, RRAS, Secure Socket Tunneling Protocol, Security, TPM, Trusted Platform Module, Update, user tunnel, VPN, Windows 10
Tagged , , , , , , , , , , , , , , , , , , , , ,

Posted by Richard M. Hicks on September 7, 2020

https://directaccess.richardhicks.com/2020/09/07/always-on-vpn-updates-for-windows-10-2004/

Always On VPN IKEv2 Load Balancing Issue with Kemp LoadMaster

Always On VPN IKEv2 Load Balancing Issue with Kemp LoadMasterA recent update to the Kemp LoadMaster load balancer may cause failed connections for Always On VPN connections using IKEv2. SSTP VPN connections are unaffected.

Load Balancing IKEv2

When using the Kemp LoadMaster load balancer to load balance IKEv2, custom configuration is required to ensure proper operation. Specifically, the virtual service must be configured to use “port following” to ensure both the initial request on UDP port 500 and the subsequent request on UDP port 4500 are sent to the same real server. This requires the virtual service to be configured to operate at layer 7. Detailed configuration guidance for load balancing IKEv2 on the Kemp LoadMaster load balancer can be found here.

Always On VPN IKEv2 Load Balancing Issue with Kemp LoadMaster

Issues with LMOS 7.2.48.0

A recent release of the Load Master Operating System (LMOS) v7.2.48.0 introduced a bug that affects UDP services configured to operate at layer 7, which includes IKEv2. This bug breaks Always On VPN connections using IKEv2, resulting in failed connections. When this occurs, the administrator may encounter an error 809 message for device tunnel or user tunnel.

Always On VPN IKEv2 Load Balancing Issue with Kemp LoadMaster

Update Available

Administrators who use the Kemp LoadMaster load balancer to load balance Always On VPN IKEv2 connections and have updated to LMOS 7.2.48.0 are encouraged to update to LMOS 7.2.48.1 immediately. This latest update includes a fix that resolves broken IKEv2 load balancing for Always On VPN. Once the LoadMaster has been updated to 7.2.48.1, Always On VPN connections using IKEv2 should complete successfully.

Additional Information

Windows 10 Always On VPN IKEv2 Load Balancing and NAT

Windows 10 Always On VPN IKEv2 Load Balancing with Kemp LoadMaster Load Balancer

Windows 10 Always On VPN SSTP Load Balancing with Kemp LoadMaster Load Balancer

Windows 10 Always On VPN Load Balancing with Kemp LoadMaster in Azure

Windows 10 Always On VPN Load Balancing Deployment Guide for Kemp Load Balancers

22 Comments
by Richard M. Hicks on November 18, 2019  •  Permalink
Posted in ADC, Always On VPN, AOVPN, application delivery controller, device tunnel, enterprise mobility, High Availability, Hotfix, IKEv2, Kemp, Load Balancing, LoadMaster, Mobility, Remote Access, routing and remote access service, RRAS, troubleshooting, Update, user tunnel, VPN, Windows 10, Windows Server 2016, Windows Server 2019
Tagged , , , , , , , , , , , , , , , , , , , , , , , , ,

Posted by Richard M. Hicks on November 18, 2019

https://directaccess.richardhicks.com/2019/11/18/always-on-vpn-ikev2-load-balancing-issue-with-kemp-loadmaster/

Always On VPN RasMan Errors in Windows 10 1903

Always On VPN RasMan Errors in Windows 10 1903After deploying or upgrading to Windows 10 1903, administrators may find that Windows 10 Always On VPN connections fail to establish successfully. Always On VPN connections continue to work for Windows 10 1809 and earlier clients, however.

Important Note: The issue described in this article has been addressed in KB4505903 (build 18362.267) released July 26, 2019.

RasMan Event Log Errors

When this occurs, the application event log contains an error with Event ID 1000 that includes the following information.

“Faulting application name: svchost.exe_RasMan…”, “Faulting module name: rasmans.dll”, and “Exception code: 0xc0000005”

Always On VPN RasMan Errors in Windows 10 1903 Administrators may find that Windows 10 Always On VPN connections fail after deploying or upgrading to Windows 10 1903. Always On VPN connections continue to work for Windows 10 1809 and earlier clients. RasMan Event Log Errors When this occurs, the application event log contains an error with Event ID 1000 that includes the following information. “Faulting application name: svchost.exe_RasMan…”, “Faulting module name: rasmans.dll”, and “Exception code: 0xc0000005” Root Cause RasMan failures can occur in Windows 10 1903 clients when telemetry is disabled via group policy or the registry. Microsoft has identified the issue and is currently working on a fix. Workaround As a temporary workaround to restore Always On VPN connectivity, enable telemetry on Windows 10 1903 using Active Directory or local group policy, the local registry, or PowerShell. Group Policy Create a new GPO or edit an existing one by opening the group policy management console (gpmc.msc) and performing the following steps. 1. Expand Computer Configuration > Administrative Templates > Windows Components > Data Collection and Preview Builds 2. Double-Click Allow Telemetry. 3. Select Enabled. 4. Choose 1-Basic, 2-Enhanced, or 3-Full (do not select 0-Security). 5. Click Ok. Registry Telemetry can also be enabled locally by opening the registry editor (regedit.exe) and modifying the following registry setting. HKLM\SOFTWARE\Policies\Microsoft\Windows\DataCollection\AllowTelemetry DWORD = 1 Note: The AllowTelemetry value can be removed entirely, if desired. PowerShell PowerShell can also be used modify or remove the AllowTelemetry value on Windows 10 1903 clients. Run the following PowerShell command to update the AllowTelemetry setting. New-ItemProperty -Path 'HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\' -Name AllowTelemetry -PropertyType DWORD -Value 1 -Force Optionally, run the following PowerShell command to remove the AllowTelemetry setting entirely. Remove-ItemProperty -Path 'HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\' -Name AllowTelemetry Restart Required Once these changes have been made, restart the client and test the Always On VPN connection. Additional Information asdf

Root Cause

RasMan failures can occur in Windows 10 1903 clients when telemetry is disabled via group policy or the registry. Microsoft has identified the issue and is currently working on a fix.

Workaround

As a temporary workaround to restore Always On VPN connectivity, enable telemetry on Windows 10 1903 using Active Directory or local group policy, the local registry, or PowerShell.

Group Policy

Create a new GPO or edit an existing one by opening the group policy management console (gpmc.msc) and performing the following steps.

1. Expand Computer Configuration > Administrative Templates > Windows Components > Data Collection and Preview Builds
2. Double-click Allow Telemetry.
3. Select Enabled.
4. Choose 1-Basic, 2-Enhanced, or 3-Full (do not select 0-Security).
5. Click Ok.

Always On VPN RasMan Errors in Windows 10 1903 Administrators may find that Windows 10 Always On VPN connections fail after deploying or upgrading to Windows 10 1903. Always On VPN connections continue to work for Windows 10 1809 and earlier clients. RasMan Event Log Errors When this occurs, the application event log contains an error with Event ID 1000 that includes the following information. “Faulting application name: svchost.exe_RasMan…”, “Faulting module name: rasmans.dll”, and “Exception code: 0xc0000005” Root Cause RasMan failures can occur in Windows 10 1903 clients when telemetry is disabled via group policy or the registry. Microsoft has identified the issue and is currently working on a fix. Workaround As a temporary workaround to restore Always On VPN connectivity, enable telemetry on Windows 10 1903 using Active Directory or local group policy, the local registry, or PowerShell. Group Policy Create a new GPO or edit an existing one by opening the group policy management console (gpmc.msc) and performing the following steps. 1. Expand Computer Configuration > Administrative Templates > Windows Components > Data Collection and Preview Builds 2. Double-Click Allow Telemetry. 3. Select Enabled. 4. Choose 1-Basic, 2-Enhanced, or 3-Full (do not select 0-Security). 5. Click Ok. Registry Telemetry can also be enabled locally by opening the registry editor (regedit.exe) and modifying the following registry setting. HKLM\SOFTWARE\Policies\Microsoft\Windows\DataCollection\AllowTelemetry DWORD = 1 Note: The AllowTelemetry value can be removed entirely, if desired. PowerShell PowerShell can also be used modify or remove the AllowTelemetry value on Windows 10 1903 clients. Run the following PowerShell command to update the AllowTelemetry setting. New-ItemProperty -Path 'HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\' -Name AllowTelemetry -PropertyType DWORD -Value 1 -Force Optionally, run the following PowerShell command to remove the AllowTelemetry setting entirely. Remove-ItemProperty -Path 'HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\' -Name AllowTelemetry Restart Required Once these changes have been made, restart the client and test the Always On VPN connection. Additional Information asdf

Registry

Telemetry can also be enabled locally by opening the registry editor (regedit.exe) and modifying the following registry setting.

HKLM\SOFTWARE\Policies\Microsoft\Windows\DataCollection\AllowTelemetry DWORD = 1

Always On VPN RasMan Errors in Windows 10 1903 Administrators may find that Windows 10 Always On VPN connections fail after deploying or upgrading to Windows 10 1903. Always On VPN connections continue to work for Windows 10 1809 and earlier clients. RasMan Event Log Errors When this occurs, the application event log contains an error with Event ID 1000 that includes the following information. “Faulting application name: svchost.exe_RasMan…”, “Faulting module name: rasmans.dll”, and “Exception code: 0xc0000005” Root Cause RasMan failures can occur in Windows 10 1903 clients when telemetry is disabled via group policy or the registry. Microsoft has identified the issue and is currently working on a fix. Workaround As a temporary workaround to restore Always On VPN connectivity, enable telemetry on Windows 10 1903 using Active Directory or local group policy, the local registry, or PowerShell. Group Policy Create a new GPO or edit an existing one by opening the group policy management console (gpmc.msc) and performing the following steps. 1. Expand Computer Configuration > Administrative Templates > Windows Components > Data Collection and Preview Builds 2. Double-Click Allow Telemetry. 3. Select Enabled. 4. Choose 1-Basic, 2-Enhanced, or 3-Full (do not select 0-Security). 5. Click Ok. Registry Telemetry can also be enabled locally by opening the registry editor (regedit.exe) and modifying the following registry setting. HKLM\SOFTWARE\Policies\Microsoft\Windows\DataCollection\AllowTelemetry DWORD = 1 Note: The AllowTelemetry value can be removed entirely, if desired. PowerShell PowerShell can also be used modify or remove the AllowTelemetry value on Windows 10 1903 clients. Run the following PowerShell command to update the AllowTelemetry setting. New-ItemProperty -Path 'HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\' -Name AllowTelemetry -PropertyType DWORD -Value 1 -Force Optionally, run the following PowerShell command to remove the AllowTelemetry setting entirely. Remove-ItemProperty -Path 'HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\' -Name AllowTelemetry Restart Required Once these changes have been made, restart the client and test the Always On VPN connection. Additional Information asdf

Note: The AllowTelemetry value can be removed entirely, if desired.

PowerShell

PowerShell can also be used modify or remove the AllowTelemetry value on Windows 10 1903 clients. Run the following PowerShell command to update the AllowTelemetry setting.

New-ItemProperty -Path ‘HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\’ -Name AllowTelemetry -PropertyType DWORD -Value 1 -Force

Optionally, run the following PowerShell command to remove the AllowTelemetry setting entirely.

Remove-ItemProperty -Path ‘HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\’ -Name AllowTelemetry

Service Restart Required

Once these changes have been made, restart the Remote Access Connection Manager service (RasMan) using the Services mnagement console (services.msc) or by running the following PowerShell command.

Restart-Service RasMan -PassThru

Optionally, the client can be rebooted to apply these changes.

Additional Information

Windows 10 1903 Known Issues

 

9 Comments
by Richard M. Hicks on July 1, 2019  •  Permalink
Posted in Always On VPN, AOVPN, enterprise mobility, Hotfix, Mobility, PowerShell, Remote Access, routing and remote access service, RRAS, Update, VPN, Windows 10
Tagged , , , , , , , , , , , , , , , , , , , , , , , ,

Posted by Richard M. Hicks on July 1, 2019

https://directaccess.richardhicks.com/2019/07/01/always-on-vpn-rasman-errors-in-windows-10-1903/

« Older Posts
Newer Posts »