Always On VPN IKEv2 Policy Mismatch Error

Always On VPN IKEv2 Policy Mismatch ErrorThe Internet Key Exchange version 2 (IKEv2) VPN protocol is the protocol of choice for Windows 10 Always On VPN deployments where the highest levels of security and assurance are required. However, as I’ve written about in the past, often the default IKEv2 security settings are less than desirable. Before using IKEv2 VPN in a production environment the administrator will need to update these security settings accordingly.

Connection Failure

When configuring Windows Server Routing and Remote Access Service (RRAS) or a third-party VPN appliance to support IKEv2 using custom security policies, the administrator may encounter a scenario in which a connection cannot be established due to a policy mismatch error. When the connection attempt fails, an error will be recorded in the Windows Application event log from the RasClient source with Event ID 20227. The error message states the following:

“The user [username] dialed a connection named [connection name] which has failed. The error code returned on failure is 13868.”

Always On VPN IKEv2 Policy Mismatch Error

Error Code 13868

Error code 13868 translates to ERROR_IPSEC_IKE_POLICY_MATCH. Essentially this error indicates that the IKEv2 security policy on the client did not match the configuration on the server.

Server Configuration

To view the current IKEv2 IPsec policy configuration, open an elevated PowerShell command window and run the following command.

Get-VpnServerIPsecConfiguration

Always On VPN IKEv2 Policy Mismatch Error

Client Configuration

To ensure interoperability, the VPN client must be configured to use the same IKEv2 security policy as defined on the sever. To view a VPN client’s currently configured IKEv2 security policy, open an elevated PowerShell command window and run the following command.

Get-VpnConnection -Name [connection name] | Select-Object -ExpandProperty IPsecCustomPolicy

Always On VPN IKEv2 Policy Mismatch Error

Note: If this PowerShell command returns no output, the VPN connection is not using a custom IKEv2 IPsec security policy.

Updating Settings

Guidance for configuring IKEv2 security policies on Windows Server RRAS and Windows 10 can be found here.

Summary

IKEv2 policy mismatch errors can be resolved easily by ensuring both the VPN server and client are configured to use the same IPsec security policies. Use the PowerShell commands in the above referenced above to validate settings and make changes when necessary.

Additional Information

Windows 10 Always On VPN IKEv2 Security Configuration

Windows 10 Always On VPN IKEv2 Features and Limitations

Show-VpnConnectionIPsecConfiguration PowerShell script on Github

Set-IKEv2SecurityBaseline PowerShell script on Github

%d bloggers like this: