All posts tagged certificate

Always On VPN Error 853 on Windows 11

Recently I did some validation testing with Always On VPN on Windows 11, and I’m happy to report that everything seems to work without issue. However, a few readers have reported 853 errors when establishing an Always On VPN connection after upgrading to Windows 11.

Can’t Connect

After upgrading to Windows 11, an Always On VPN connection may fail with the following error message.

“The remote access connection completed, but authentication failed because the certificate that authenticates the client to the server is not valid. Ensure the certificate used for authentication is valid.”

Error 853

In addition, the Application event log records an event ID 20227 from the RasClient source that includes the following message.

“The user <username> dialed a connection name <connection name> which has failed. The error code returned on failure is 853.”

Server Identity

This error will occur when using Protected Extensible Authentication Protocol (PEAP) authentication. Specifically, it can happen when the option to verify NPS server validity by its certificate is selected, and an explicit list of NPS servers is defined, as shown here.

Case Sensitive

In this specific scenario, Windows 11 now appears to be case-sensitive when it compares the NPS server name entered in the NPS configuration to the Subject Name on the certificate returned by the server. For example, if the Subject Name (or Subject Alternative Name, if present) entry on the NPS server certificate is nps.lab.richardhicks.net, using NPS.lab.richardhicks.net will not match and return an 853 error.

Windows 11

Case matching when validating the NPS server certificate is a change in behavior from Windows 10. Before Windows 11, this comparison was case-insensitive, and any combination of case would match if the entire hostname matched. Going forward, it appears Microsoft has also decided to require case matching to validate the server certificate.

Recommendations

Administrators should look carefully at the server certificate issued to the NPS server and ensure their client configuration accurately reflects the hostname in a case-sensitive manner to ensure a smooth migration from Windows 10 to Windows 11.

Additional Information

Troubleshooting Windows 10 Always On VPN Error 853

Windows 10 Always On VPN Network Policy Server (NPS) Load Balancing

22 Comments
by Richard M. Hicks on September 23, 2021  •  Permalink
Posted in Always On VPN, AOVPN, authentication, certificates, EAP, Enterprise, enterprise mobility, extensible authentication protocol, Mobility, Name Resolution, network policy server, NPS, PEAP, Protected EAP, Remote Access, Security, troubleshooting, VPN, Windows 11
Tagged , , , , , , , , , , , , ,

Posted by Richard M. Hicks on September 23, 2021

https://directaccess.richardhicks.com/2021/09/23/always-on-vpn-error-853-on-windows-11/

Always On VPN Authentication Failure with Azure Conditional Access

Always On VPN Clients Prompted for Authentication when Accessing Internal Resources

Integrating Microsoft Azure Conditional Access with Windows 10 Always On VPN has several important benefits. The most important is that it allows administrators to improve their security posture by enforcing access polices that can be dynamically applied. For example, requiring multifactor authentication (MFA) for privileged users (e.g., administrators) or sign-ins that appear to be risky, the type of device they are connecting with, the health of the endpoint, and much more.

Authentication Failure

When configuring Always On VPN to support Azure Conditional Access, administrators may expeirence a failed authentication during preliminary testing. Specifically, an event ID 20227 from the RasClient source may be encountered with the following error message.

“The user <username> dialed a connection named <connection name> which has failed. The error code returned on failure is 812.”

Looking at the event logs on the Network Policy Server (NPS) server reveals an event ID 6273 from the Microsoft Windows security auditing source with Reason Code 258 and the following Reason.

“The revocation function was unable to check revocation for the certificate.”

Root Cause

When Azure Conditional Access is configured for Always On VPN, a short-lived certificate (1 hour lifetime) is provisioned by Azure. This certificate does not include revocation information because, by design, a short-lived certificate does not need to be revoked. However, by default NPS always checks revocation when client authentication certificates are used for authentication. Since the certificate does not include this information, certificate revocation fails.

Resolution

The way to resolve this issue is to disable certificate revocation checking for Protected Extensible Authentication Protocol (PEAP) authentication requests. To do this, open an elevated PowerShell window on the NPS server and run the following command.

New-ItemProperty -Path ‘HKLM:\SYSTEM\CurrentControlSet\Services\RasMan\PPP\EAP\13\’ -Name IgnoreNoRevocationCheck -PropertyType DWORD -Value 1 -Force

Once complete, restart the NPS server for the changes to take effect.

Additional Information

Windows 10 Always On VPN Network Policy Server (NPS) Load Balancing

Windows 10 Always On VPN Network Policy Server (NPS) Server 2019 Bug

24 Comments
by Richard M. Hicks on August 29, 2021  •  Permalink
Posted in Always On VPN, AOVPN, Azure, Azure Active Directory, Azure AD, Azure Conditional Access, Azure MFA, Azure VPN, Azure VPN Gateway, certificates, Conditional Access, EAP, Enterprise, enterprise mobility, HAADJ, Hybrid Azure AD Join, MFA, Mobility, Multifactor Authentiction, network policy server, NPS, Operational Support, PowerShell, Protected EAP, Remote Access, RRAS, user tunnel, VPN, Windows 10
Tagged , , , , , , , , , , , , , , , , , , , ,

Posted by Richard M. Hicks on August 29, 2021

https://directaccess.richardhicks.com/2021/08/29/always-on-vpn-authentication-failure-with-azure-conditional-access/

Always On VPN Continue Connecting Prompt

Using the Extensible Authentication Protocol (EAP) with client certificates is the recommended best practice for authentication for Windows 10 Always On VPN deployments. EAP, and especially Protected EAP (PEAP), has a lot of settings to configure and it is not uncommon to encounter issues related to some parameters being defined incorrectly. This post covers one of the more common issues related to EAP/PEAP misconfiguration.

Action Needed?

When establishing an Always On VPN user tunnel connection, users may find the connection does not complete automatically, and they are informed that additional action is needed.

Clicking on the VPN connection and then clicking Connect prompts the user with the following message.

“Action needed. Continue connecting? We don’t have enough info to validate the server. You can still connect if you trust this server.”

Common Causes

This message can occur when (EAP) is used and is configured to perform server validation with a restricted set of NPS servers, as shown here.

NPS Server Certificate

The NPS server performing authentication for the connection request must have a certificate that includes a subject name that matches one of the names of the NPS servers defined in the EAP configuration. The certificate must be issued by the organizations private certification authority (CA).

EAP Configuration

Alternatively, the client-side EAP configuration may be incorrect. Although the NPS server may have the correct hostname configured on its certificate, it may not be entered correctly on the client. Ensure the hostname listed in the “Connect to these servers” field matches the subject name or SAN of the NPS server certificate defined in the network policy used for the Always On VPN user tunnel. Look carefully at the syntax when defining multiple NPS servers. Multiple servers are separated by a semi-colon and there are no additional spaces. Missing either one of these critical details will result in connection prompts. Also, ensure that all NPS servers used for authentication (those defined on the VPN server) are included in this list.

Note: Administrators must ensure that all VPN clients have updated their EAP configuration before adding additional NPS servers to the environment. Failure to do so will result in connection prompts.

Security Best Practice

To be clear, the behavior above is not ideal from a security perspective. Validating the NPS server before authenticating is crucial to ensuring the highest level of security and assurance, preventing credential theft from a man-in-the-middle attack. For this reason, it is recommended that users not be given the choice to authorize an NPS server. Authorized NPS servers should be defined by administrators exclusively. This is accomplished by selecting the option “Don’t ask user to authorize new servers or trusted CAs” in the Notifications before connecting drop-down list, and by selecting the option “Don’t prompt user to authorize new servers or trusted certification authorities“.

Additional Information

Always On VPN Network Policy Server (NPS) Load Balancing

Always On VPN and Windows Server 2019 NPS Bug

21 Comments
by Richard M. Hicks on April 5, 2021  •  Permalink
Posted in Always On VPN, AOVPN, authentication, EAP, Enterprise, enterprise mobility, extensible authentication protocol, Mobility, network policy server, NPS, PEAP, Protected EAP, Remote Access, user tunnel, VPN, Windows 10
Tagged , , , , , , , , , , , ,

Posted by Richard M. Hicks on April 5, 2021

https://directaccess.richardhicks.com/2021/04/05/always-on-vpn-continue-connecting-prompt/

« Older Posts
Newer Posts »
%d bloggers like this: