Top 5 DirectAccess Troubleshooting Tips

Top 5 DirectAccess Troubleshooting TipsDirectAccess is a thing of beauty when everything is working as it should. When it isn’t, troubleshooting can be quite challenging. DirectAccess relies on many Windows platform technologies such as Active Directory for authentication, PKI for certificate management, group policy for settings deployment, IPsec for encryption, and IPv6 for transport. With so many dependencies, locating the source of the problem can be a difficult and daunting task.

I’m frequently called upon to help organizations of all sizes with DirectAccess troubleshooting. While this post is not intended to be a detailed, prescriptive guide for DirectAccess troubleshooting, I did want to share some common troubleshooting tips based on many years of troubleshooting DirectAccess.

Here are my top 5 DirectAccess troubleshooting tips:

  1. Check Prerequisites – Before diving in and collecting network traces and scouring event logs for clues as to why DirectAccess isn’t working, it’s essential to start at the beginning. Often the source of trouble is missing or misconfigured prerequisites. For example, is the DirectAccess client running a supported operating system? Remember, clients must be running Windows 10 Enterprise or Education, Windows 8.x Enterprise, or Windows 7 Enterprise or Ultimate. Also, ensure that the Windows firewall is enabled on DirectAccess servers and clients, that certificates are installed and valid (trusted, correct EKU, etc.), and that the DirectAccess settings GPO has been applied to servers and clients.
  2. Validate External Connectivity – If you are following implementation and security best practices for DirectAccess, the DirectAccess server will be in a perimeter/DMZ network behind an edge firewall. The firewall must be configured to allow inbound TCP port 443 only. If the firewall is also performing Network Address Translation (NAT), the NAT rule must be configured to forward traffic to the DirectAccess server’s dedicated or virtual IP address (VIP), or the VIP of the load balancer. Watch for routing issues when using load balancers too. It’s a good idea to confirm external connectivity using the Test-NetConnection PowerShell command. Even better, use the open source tool Nmap for more thorough testing.
  3. Remove Third Party Software – I can’t tell you how many times I’ve resolved DirectAccess connectivity issues by removing (not just disabling!) third party software on the client and/or server. It’s not uncommon for third-party security software to interfere with IPsec and/or IPv6 communication, both of which are vital to DirectAccess. If your DirectAccess troubleshooting efforts reveal no underlying issues with prerequisites or external connectivity, I’d suggest removing (at least temporarily) any third-party software and testing again.
  4. Isolate Environmental Issues – Occasionally other settings applied manually or via Active Directory group policy will interfere with DirectAccess. Examples include IPv6 being disabled in the registry, IPv6 transition technologies required to support DirectAccess are turned off, essential firewall rules for DirectAccess are disabled, or manipulating local security settings such as Access this computer from the network. To assist with troubleshooting it might be necessary to temporarily place DirectAccess clients and servers in their own dedicated Organizational Units (OUs) and block inheritance to isolate the configuration as much as possible. In addition, if DirectAccess clients are servers are provisioned using images or templates, testing with a clean build straight from the installation source (ISO or DVD) can be helpful.
  5. Check for Unsupported Configurations – If DirectAccess isn’t working, it might be possible the configuration you are trying to use is not supported. Examples including strong user authentication with OTP when force tunneling is enabled, provisioning Windows 7 clients when using Kerberos Proxy authentication, or provisioning Windows 10 clients when Network Access Protection (NAP) integration is enabled. These configurations won’t work and are formally documented here.

This is by no means a comprehensive or exhaustive troubleshooting guide. For more information and additional DirectAccess troubleshooting guidance I would encourage you to purchase my book Implementing DirectAccess with Windows Server 2016, which has an entire chapter devoted just to troubleshooting. In addition, watch my DirectAccess video training courses on Pluralsight for details and information about DirectAccess installation, configuration, management, support, and troubleshooting. And if you’re still struggling to resolve a DirectAccess problem, use the form at the bottom of this page to contact me to inquire about additional troubleshooting help.

Additional Resources

Microsoft Windows DirectAccess Client Troubleshooting Tool
DirectAccess and Windows 10 Professional
DirectAccess Troubleshooting with Nmap
DirectAccess Unsupported Configurations
Planning and Implementing DirectAccess with Windows Server 2016 Video Training Course on Pluralsight
Implementing DirectAccess with Windows Server 2016 Book

Need assistance with DirectAccess troubleshooting? Complete the form below and I’ll get in touch with you.