Integrating Microsoft Azure Conditional Access with Windows 10 Always On VPN has several important benefits. The most important is that it allows administrators to improve their security posture by enforcing access polices that can be dynamically applied. For example, requiring multifactor authentication (MFA) for privileged users (e.g., administrators) or sign-ins that appear to be risky, the type of device they are connecting with, the health of the endpoint, and much more.
Authentication Failure
When configuring Always On VPN to support Azure Conditional Access, administrators may expeirence a failed authentication during preliminary testing. Specifically, an event ID 20227 from the RasClient source may be encountered with the following error message.
“The user <username> dialed a connection named <connection name> which has failed. The error code returned on failure is 812.”
Looking at the event logs on the Network Policy Server (NPS) server reveals an event ID 6273 from the Microsoft Windows security auditing source with Reason Code 258 and the following Reason.
“The revocation function was unable to check revocation for the certificate.”
Root Cause
When Azure Conditional Access is configured for Always On VPN, a short-lived certificate (1 hour lifetime) is provisioned by Azure. This certificate does not include revocation information because, by design, a short-lived certificate does not need to be revoked. However, by default NPS always checks revocation when client authentication certificates are used for authentication. Since the certificate does not include this information, certificate revocation fails.
Resolution
The way to resolve this issue is to disable certificate revocation checking for Protected Extensible Authentication Protocol (PEAP) authentication requests. To do this, open an elevated PowerShell window on the NPS server and run the following command.
Using Windows Server Network Policy Server (NPS) servers is a common choice for authenticating Microsoft Windows 10 Always On VPN user tunnel connections. The NPS server is joined to the domain and configured with a Network Policy that defines the authentication scheme used by clients for authentication when establishing an Always On VPN connection. Protected Extensible Authentication Protocol (PEAP) using client authentication certificates recommended for most Always On VPN deployment scenarios.
Experiencing error 853 on Windows 11? Click here for more information.
Can’t Connect
Users establishing an Always On VPN user tunnel connection using PEAP and client authentication certificates may encounter a scenario in which a VPN connection attempt fails with the following error message.
“The remote access connection completed, but authentication failed because the certificate that authenticates the client to the server is not valid. Ensure that the certificate used for authentication is valid.”
Error 853
In addition, the Application event log records an event ID 20227 from the RasClient source that includes the following error message.
“The user <username> dialed a connection named <connection name> which has failed. The error code is 853.”
Missing NTAuth Certificate
Error code 853 is commonly caused by a missing issuing Certification Authority (CA) certificate in the NTAuth store on the NPS server. The NPS server must have the issuing CA certificate included in this store to perform authentication using client certificates. You can see the contents of the NTAuth certificate store by opening an elevated command window on the NPS server and running the following command.
certutil.exe -enterprise -viewstore NTAuth
Install Certificate
To install the issuing CA server’s certificate into the NTAuth store, copy the CA certificate to the NPS server, open an elevated command window, then run the following command.
certutil.exe -enterprise -addstore NTAuth <issuing CA certificate>
Once complete, view the store again, and you’ll see the issuing CA certificate listed in the NTAuth certificate store.
Zero Trust Network Access (ZTNA) is a term that administrators are likely familiar with, as it is one of the hottest marketing buzzwords in circulation today. ZTNA can mean different things depending on the deployment scenario. ZTNA is fundamentally about enforcing the principle of least privilege for endpoints connecting remotely to the corporate network when it comes to enterprise mobility and remote access.
Trusted Access
Historically, VPNs and even DirectAccess granted full, unrestricted network access to authenticated devices and users. Once the endpoint has an IP address, and in the absence of other controls (routing limitations, firewall access controls, etc.), the user could access any resource on the internal network. The rationale was that authenticated devices and users should be considered “trusted”.
Limitations
The Trusted Access model has some significant limitations. It assumes that all traffic from authorized users and devices is legitimate. However, if an endpoint is compromised, an attacker has broad access to the internal network, which is not ideal from a security perspective.
Zero Trust
Zero Trust Network Access is a concept where administrators define explicitly the minimum level of access required to support remote workers. Instead of granting full network access to the endpoint, controlling access using fine-grained policies is enforced on the VPN connection. Configuring limited network access for Always On VPN clients dramatically reduces exposure of the internal network to compromised endpoints.
ZTNA Management
There is a significant management burden associated with this approach, however. Administrators must identify each application requiring VPN access and determine all associated protocols and ports to be allowed, and internal resources to which they will communicate. Although this task isn’t difficult if clients require access to a small subset of internal resources, it can be a substantial undertaking if clients require access to many internal resources from numerous client applications.
Moving Targets
Making things more challenging is that application and network infrastructure often change constantly, requiring administrators to manage network access continually to ensure application availability. When adding new applications or changing the internal infrastructure, updating the configuration on all remote endpoints will be required.
Updating Always On VPN configuration for devices managed with Microsoft Endpoint Manager (formerly Intune) isn’t difficult. However, it can be more challenging when using PowerShell with System Center Configuration Manager (SCCM) or another endpoint management platform.
Traffic Filters
ZTNA can be configured with Always On VPN using Traffic Filters. With Traffic Filters, administrators can apply fine-grained access control for VPN traffic based on a combination of the following.
Source IP address (IP address, address range, or subnet)
Destination IP address (IP address, address range, or subnet)
Protocol (TCP, UDP, IP, etc.)
Source Port
Destination Port
Endpoint Manager Configuration
Configuring Traffic Filters for Always On VPN connections can be performed using Microsoft Endpoint Manager. Open the Endpoint Manager management console (https://endpoint.microsoft.com), navigate to the Always On VPN device configuration profile, then perform the following steps.
Expand App and Traffic Rules.
Click Add next to Network traffic rules for this VPN connection.
Enter a descriptive name in the Name field.
Select Split tunnel from the Rule type drop-down list.
Enter “6” in the Protocol field.
Enter “3389” in the Lower port and Upper port fields in the Remote port ranges section.
Enter an IPv4 address in the Lower IPv4 address field.
Enter an IPv4 address in the Upper IPv4 address field. Enter the same IPv4 address as the lower address to specify a single host.
Click Save.
The example above shows a traffic filter restricting access to TCP port 3389 (Remote Desktop Protocol) from all VPN clients to the 172.16.0.0/24 network.
Note: Repeat these steps to create as many traffic filters as required for any processes or applications that must communicate over the Always On VPN connection.
XML Configuration
Traffic Filters can also be configured using custom XML. To implement the same Traffic Filter described previously, add the following code between the <VPNProfile> and </VPNProfile> tags in your XML configuration file.
Note: Address ranges used in Traffic Filters can be defined using CIDR notation in XML, but they are not supported using Microsoft Endpoint Manager today.
Default Deny
When configuring a Traffic Filter for an Always On VPN profile, an implicit “deny all” rule is automatically enabled. Any traffic not explicitly defined in a Traffic Filter will be denied, including unsolicited inbound traffic, which has crucial implications for the device tunnel because it is used commonly for system management of remote devices.
Direction
Traffic Filters are enabled for the Outbound direction only, by default. Beginning with Windows 10 2004, Microsoft introduced support for Inbound traffic filters. Before Windows 10 2004, configuring a Traffic Filter on the device tunnel would break manage-out scenarios by denying all unsolicited inbound network access.
As of this writing, configuring inbound Traffic Filters using Microsoft Endpoint Manager is not supported. They are only configurable using custom XML.
To implement a Traffic Filter to allow inbound RDP access from the internal network over the device tunnel, add the following code between the <VPNProfile> and </VPNProfile> tags in your XML configuration file.
Note: When configuring inbound Traffic Filters, specify the port of the listening process or application using the LocalPortRanges field.
Application Filters
Administrators can combine Application Filters with Traffic Filters to control network access over the Always On VPN connection even more granularly. Applications can be defined by the following.
Package Family Name (PFN) – This is the unique name of a Microsoft Store application. Use the Get-AppxPackage PowerShell command to find the PFN for an application.
File Path – This is the full path to any executable on the file system. For example, c:\Windows\System32\mstsc.exe.
SYSTEM – This allows Windows kernel-mode drivers (such as ping.exe and net.exe) to send traffic over the Always On VPN connection.
As of this writing, configuring Application Filters using Microsoft Endpoint Manager is not supported. They are only configurable using custom XML.
Application Filter Examples
Below are three examples showing different Application Filters based on file path, Package Family Name, and SYSTEM.
File Path
This example shows a Traffic Filter configured to allow RDP access to an internal subnet using the native Windows Remote Desktop client (mstsc.exe).
Note: Ping uses ICMP (IP protocol 1), which is a network layer protocol. As such, defining ports for the filter is not required.
IPv6 Compatibility
Sadly, the filtering techniques described in this article do not work when also configuring IPv6 on the Always On VPN connection. As of this writing, enabling Traffic Filters when an IPv6 address is assigned to the VPN interface is not supported. More details can be found here.
Configuring Zero Trust Network Access (ZTNA) with Windows 10 Always On VPN is not trivial. Still, with attention to detail, it can be a highly effective tool to enforce fine-grained network access policies and reduce exposure of the internal network to compromised endpoints. Combining Traffic Filters with Application Filters allows administrators to tightly control Always On VPN access and ensure the principle of least privilege is applied.
