DirectAccess IP-HTTPS Not Working Properly in Windows Server 2019

After installing and configuring DirectAccess in Windows Server 2019 you may encounter an error message indicating that IP-HTTPS is not working properly. Looking at the Operations Status overview in the Dashboard of the Remote Access Management console shows that the IP-HTTPS interface is in error.

DirectAccess IP-HTTPS Not Working Properly in Windows Server 2019

IP-HTTPS Route Error

Viewing the detailed Operations Status shows the following error message.

Error: The IP-HTTPS route does not have published property enabled.

DirectAccess IP-HTTPS Not Working Properly in Windows Server 2019

Missing Route

Looking at the routing table on the DirectAccess server reveals that a route to the client IPv6 prefix is indeed missing.

DirectAccess IP-HTTPS Not Working Properly in Windows Server 2019

Resolution

To resolve this error message, add the client IPv6 route to the DirectAccess server’s routing table and publish it. This is accomplished by running the following PowerShell commands on the DirectAccess server.

$IPv6prefix = (Get-RemoteAccess).ClientIPv6Prefix
New-NetRoute -AddressFamily IPv6 -DestinationPrefix $IPv6prefix -InterfaceAlias “Microsoft IP-HTTPS Platform Interface” -Publish Yes

Next, restart the Remote Access Management service (RaMgmtSvc) using the following PowerShell command.

Restart-Service RaMgmtSvc -PassThru

DirectAccess IP-HTTPS Not Working Properly in Windows Server 2019

Once complete, refresh the management console and the IP-HTTPS error message should be resolved and the operations status should state that it is now working properly.

DirectAccess IP-HTTPS Not Working Properly in Windows Server 2019

 

Additional Information

SSL Certificate Conisderations for DirectAccess IP-HTTPS

DirectAccess Expire IP-HTTPS Certificate and Error 0x800b0101

Always On VPN SSL Certificate Requirements for SSTP

Always On VPN Certificate Requirements for SSTPThe Windows Server 2016 Routing and Remote Access Service (RRAS) is commonly deployed as a VPN server for Windows 10 Always On VPN deployments. Using RRAS, Always On VPN administrators can take advantage of Microsoft’s proprietary Secure Socket Tunneling Protocol (SSTP) VPN protocol. SSTP is a Transport Layer Security (TLS) based VPN protocol that uses HTTPS over the standard TCP port 443 to encapsulate and encrypt communication between the Always On VPN client and the RRAS VPN server. SSTP is a firewall-friendly protocol that ensures ubiquitous remote network connectivity. Although IKEv2 is the protocol of choice when the highest level of security is required for VPN connections, SSTP can still provide very good security when implementation best practices are followed.

SSTP Certificate

Since SSTP uses HTTPS for transport, a common SSL certificate must be installed in the Local Computer/Personal/Certificates store on the RRAS VPN server. The certificate must include the Server Authentication Enhanced Key Usage (EKU) at a minimum. Often SSL certificates include both the Server Authentication and Client Authentication EKUs, but the Client Authentication EKU is not strictly required. The subject name on the certificate, or at least one of the Subject Alternative Name entries, must match the public hostname used by VPN clients to connect to the VPN server. Multi-SAN (sometimes referred to as UC certificates) and wildcard certificates are supported.

Always On VPN Certificate Requirements for SSTP

Certification Authority

It is recommended that the SSL certificate used for SSTP be issued by a public Certification Authority (CA). Public CAs typically have their Certificate Revocation Lists (CRLs) hosted on robust, highly available infrastructure. This reduces the chance of failed VPN connection attempts caused by the CRL being offline or unreachable.

Using an SSL certificate issued by an internal, private CA is supported if the CRL for the internal PKI is publicly available.

Key Type

RSA is the most common key type used for SSL certificates. However, Elliptic Curve Cryptography (ECC) keys offer better security and performance, so it is recommended that the SSTP SSL certificate be created using an ECC key instead.

Always On VPN Certificate Requirements for SSTP

To use an ECC key, be sure to specify the use of a Cryptographic Next Generation (CNG) key and select the ECDSA_P256 Microsoft Software Key Storage Provider (CSP) (or greater) when creating the Certificate Signing Request (CSR) for the SSTP SSL certificate.

Always On VPN Certificate Requirements for SSTP

Most public CAs will support certificate signing using ECC and Elliptic Curve Digital Signature Algorithm (ECDSA). If yours does not, find a better CA. 😉

Forward Secrecy

Forward secrecy (sometimes referred to as perfect forward secrecy, or PFS) ensures that session keys can’t be compromised even if the server’s private key is compromised. Using forward secrecy for SSTP is crucial to ensuring the highest levels of security for VPN connections.

To enforce the use of forward secrecy, the TLS configuration on the VPN server should be prioritized to prefer cipher suites with Elliptic Curve Diffie-Hellman Ephemeral (ECDHE) key exchange.

Authenticated Encryption

Authenticated encryption (AE) and authenticated encryption with associated data (AEAD) is a form of encryption that provides better data protection and integrity compared to older block or stream ciphers such as CBC or RC4.

To enforce the use of authenticated encryption, the TLS configuration on the VPN server should be prioritized to prefer cipher suites that support Galois/Counter Mode (GCM) block ciphers.

Important Note: In Windows Server 2016, GCM ciphers can be used with both RSA and ECC certificates. However, in Windows Server 2012 R2 GCM ciphers can only be used when an ECC certificate is used.

SSL Offload

Offloading SSL to a load balancer or application delivery controller (ADC) can be enabled to improve scalability and performance for SSTP VPN connections. I will cover SSL offload for SSTP in detail in a future post.

Summary

SSTP can provide good security for VPN connections when implementation and security best practices are followed. For optimum security, use an SSL certificate with an EC key and optimize the TLS configuration to use forward secrecy and authenticated cipher suites.

Additional Information

Always On VPN ECDSA SSL Certificate Request for SSTP

Always On VPN and Windows Server Routing and Remote Access Service (RRAS)

Always On VPN Protocol Recommendations for Windows Server RRAS

Always On VPN Certificate Requirements for IKEv2

3 Important Advantages of Always On VPN over DirectAccess

Microsoft SSTP Specification on MSDN

Deleting an Always On VPN Device Tunnel

Deleting an Always On VPN Device TunnelWindows 10 Always On VPN supports both a user tunnel for corporate network access, and a device tunnel typically used to provide pre-logon network connectivity and to support manage out scenarios. The process of testing Always On VPN is often an iterative one involving trial and error testing to fine tune the configuration parameters to achieve the best experience. As a part of this process it will often be necessary to delete a connection at some point. For the user tunnel the process is simple and straightforward. Simply disconnect the session and delete the connection in the UI.

Deleting an Always On VPN Device Tunnel

Deleting a device tunnel connection presents a unique challenge though. Specifically, there is no VPN connection in the UI to disconnect and remove. To delete an Always On VPN device tunnel, open an elevated PowerShell window and enter the following command.

Get-VpnConnection -AllUserConnection | Remove-VpnConnection -Force

If the device tunnel is connected when you try to remove it, you will receive the following error message.

The VPN connection [connection_name] cannot be removed from the global user connections. Cannot
delete a connection while it is connected.

Deleting an Always On VPN Device Tunnel

The device tunnel must first be disconnected to resolve this issue. Enter the following command to disconnect the device tunnel.

rasdial.exe [connection_name] /disconnect

Remove the device tunnel connection using PowerShell once complete.

Deleting an Always On VPN Device Tunnel
Additional Resources

Windows 10 Always On VPN Device Tunnel Step-by-Step Configuration using PowerShell

What’s The Difference Between DirectAccess and Always On VPN?

Windows 10 Always On VPN Recommendations for Windows Server 2016 Routing and Remote Access Service (RRAS)

Windows 10 Always On VPN Hands-On Training