All posts in category Azure AD Join

Considerations for Always On VPN with Azure VPN Gateway and Virtual WAN

Always On VPN Device Tunnel and Custom Cryptography Native Support Now in Intune

Organizations migrating on-premises applications, data, and infrastructure to the cloud may also consider terminating Always On VPN connections there. Using one of the native Azure VPN services might be compelling at first glance. After all, having an Azure-managed VPN gateway service sounds intuitive. However, some severe limitations exist for using Azure VPN services for Always On VPN deployments.

Azure VPN Gateway

The following are limitations for Always On VPN with Azure VPN gateway.

Authentication Methods

Azure VPN gateway supports both EAP and machine certificate authentication. However, it can only support one authentication method at a time. With only EAP or certificate authentication, administrators must choose between a device or user tunnel. A single Azure VPN gateway cannot support both at the same time. For native Entra ID joined devices, this is not a problem. However, for native on-premises Active Directory or hybrid Entra ID joined devices, this is a problem, as the device tunnel is essential in these scenarios.

Note: Technically speaking, administrators could deploy another Azure VPN gateway to work around this limitation. However, Azure limits VPN gateway deployments to one per virtual network. This requires administrators to deploy a second VPN gateway in a separate virtual network, which then requires virtual network peering to be enabled, complicating the configuration greatly.

SSTP

Although the Azure VPN gateway supports SSTP, it is, unfortunately, a second-class citizen. Today, all SKUs of the Azure VPN gateway are limited to just 128 SSTP connections (256 in active/active mode). There is currently no way to increase this. If more than 256 connections are required, you must use IKEv2.

RADIUS

In addition, there is currently no option to change the default timeout value (30 seconds) for RADIUS authentication requests. This short timeout value presents a challenge when using MFA with the NPS extension or with Azure Conditional Access, as users may be unable to respond to the push notification before the timeout expires, resulting in failed authentication attempts.

In addition, Azure does not support routing traffic to on-premises RADIUS servers over ExpressRoute connections. In this scenario, administrators must route RADIUS traffic to on-premises servers over a site-to-site connection.

Geographic Redundancy

Geographic redundancy using Azure Traffic Manager (or another global server load balancer) with two or more gateways is not supported when using the Azure VPN gateway. Azure manages the certificate used on the gateway, which includes a certificate with the subject name of the individual gateway. There is no option to supply a custom certificate with a global hostname in the subject, which is required to support geographic redundancy. With that, administrators are limited to the redundancy provided natively by the Azure VPN gateway.

IPv6

Azure does not support Azure VPN gateway in a virtual network that includes IPv6 addressing.

Azure Virtual WAN

Azure Virtual WAN includes many of the same limitations as the Azure VPN gateway, in addition to the following.

SSTP

Unlike the Azure VPN gateway, there is no support for SSTP in Azure Virtual WAN.

IPv6

IPv6 is not currently supported at all in Azure Virtual WAN.

Summary

Intuitively, it seems that leveraging native Azure VPN gateway services would be ideal. However, due to the limitations outlined in this article, administrators must decide carefully if any of these prevent adoption in their environment. Although not formally supported, many organizations deploy Windows Server Routing and Remote Access (RRAS) servers in Azure to address these limitations.

Additional Information

Always On VPN Options for Azure Deployments

Always On VPN with Azure Gateway

Always On VPN Device Tunnel with Azure VPN Gateway

Always On VPN and RRAS in Azure

What is Azure VPN Gateway?

What is Azure Virtual WAN?

3 Comments
by Richard M. Hicks on January 31, 2024  •  Permalink
Posted in AADJ, Active Directory, administration, Always On VPN, AOVPN, authentication, Azure, Azure Active Directory, Azure AD, Azure AD Join, Azure Conditional Access, Azure MFA, Azure Virtual WAN, Azure VPN, Azure VPN Gateway, certificates, cloud, Cloud Service, Conditional Access, Deployment, device tunnel, EAP, Enterprise, enterprise mobility, Entra, Entra ID, extensible authentication protocol, global server load balancer, GSLB, HAADJ, High Availability, Hybrid Azure AD Join, IKEv2, Infrastructure, IPv6, MFA, Microsoft, Microsoft Entra, Microsoft Entra ID, Mobility, Multifactor Authentiction, multisite, network policy server, NPS, OTP, public cloud, Remote Access, routing and remote access service, RRAS, Secure Socket Tunneling Protocol, Security, SSTP, user tunnel, VPN, Windows 10, Windows 11, Windows Server 2016, Windows Server 2019, Windows Server 2022
Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Posted by Richard M. Hicks on January 31, 2024

https://directaccess.richardhicks.com/2024/01/31/considerations-for-always-on-vpn-with-azure-vpn-gateway-and-virtual-wan/

Always On VPN Disconnects in Windows 11

Always On VPN administrators migrating their endpoints to Windows 11 may encounter a scenario where Always On VPN randomly disconnects when the VPN profile is deployed using Microsoft Intune. The same configuration deployed to Windows 10 devices works reliably, however. In addition, Always On VPN profiles deployed using PowerShell (natively or with SCCM) or Dynamic Profile Configurator (DPC) do not experience this problem.

Troubleshooting

Administrators troubleshooting this issue will find the root cause is associated with the Always On VPN profiles being removed and replaced each time the device syncs with Intune. This occurs even if there are no changes to the configuration. Removing and replacing the Always On VPN profiles on each device sync is unnecessary, of course, but is also highly disruptive to connected users.

Intune and XML

The Intune team identified the issue, and a fix was made available in the August update. However, many of you have reported the issue persists with some Windows 11 clients after installing the latest updates. Further investigation indicates that although the issue has been resolved when using Intune and the native VPN device configuration profile template, the problem still occurs when using the Custom device configuration template.

Workaround

Microsoft is aware of the issues with deploying Always On VPN client configuration settings using XML in Intune, but there’s no indication when or if they will fix it. Until then, administrators have two options to address this problem.

Native VPN Template

When deploying Always On VPN client configuration settings to Windows 11 endpoints, use the native VPN device configuration template, as shown here.

Using the native VPN template does have some limitations, however. The following settings are not exposed using the native VPN template and can only be configured using XML.

XML

If you must use XML, I’ve had some success by ensuring the order and syntax of XML settings is exactly as Intune expects. Follow the steps below to confirm the XML settings order in your XML configuration file.

  1. Deploy your XML file with Intune.
  2. Run Get-VpnClientProfileXML.ps1 to extract the deployed XML settings.
  3. Compare the order of settings to your existing XML.
  4. Compare the syntax of all settings. For example, the <Servers> section should list the server FQDN twice, separated by a semi-colon.
  5. Make changes to ensure all settings in your XML are in the same order as the extracted XML.
  6. Publish a new XML configuration file using Intune and test.

I’ll caution you that this workaround doesn’t always work reliably. Some customers report that this solved their problems entirely, while others have indicated it does not. My testing shows the same results. Let us know in the comments below if this works for you!

Reference XML

I have published an Always On VPN XML configuration file on GitHub for reference. It includes all common settings using the order and syntax required to ensure reliable operation. As a reminder, the sample file includes many settings that aren’t required. It is published as guidance for reference only.

Additional Information

Always On VPN Windows 11 Issues with Intune

Always On VPN PowerShell Script Issues in Windows 11

48 Comments
by Richard M. Hicks on October 9, 2023  •  Permalink
Posted in Always On VPN, AOVPN, AovpnDPC, Application Filter, Azure AD Join, Azure VPN, Deployment, Device Management, device tunnel, DPC, Dynamic Profile Configurator, Endpoint Manager, Enterprise, enterprise mobility, Intune, MDM, MEM, MEMCM, Microsoft, Microsoft Endpoint Manager, Microsoft Intune, Mobility, OMA-DM, OMA-URI, Operational Support, PowerShell, ProfileXML, Remote Access, SCCM, System Center Configuration Manager, systems management, Traffic Filter, Update, user tunnel, VPN, Windows 11
Tagged , , , , , , , , , , , , , , , , , , , ,

Posted by Richard M. Hicks on October 9, 2023

https://directaccess.richardhicks.com/2023/10/09/always-on-vpn-disconnects-in-windows-11/

Microsoft Entra Global Secure Access

Last week Microsoft introduced new Security Service Edge (SSE) capabilities as part of the Microsoft Entra suite of technologies. Included in these announcements, Microsoft introduced the public preview of two new secure remote access technologies – Microsoft Entra Internet Access and Microsoft Entra Private Access. The latter of these will particularly interest Microsoft Always On VPN administrators in some deployment scenarios.

Microsoft Entra Internet Access

Microsoft Entra Internet Access is a new Secure Web Gateway (SWG) cloud service solution designed to protect users from threats on the public Internet. Features include web content filtering, malware inspection, TLS inspection, and more. In addition, Entra Internet Access can protect Microsoft 365 applications. Azure Conditional Access policies can be enforced for Internet traffic. Network conditions are now included with Azure Conditional Access, which can further protect against attacks by requiring access from specific trusted or compliant networks. Today, the public preview is available for Microsoft 365 scenarios only. Internet traffic and other SaaS applications will be available later this year.

Microsoft Entra Private Access

Microsoft Entra Private Access is a Zero Trust Network Access (ZTNA) cloud service solution that leverages the Azure Application Proxy access model. With Azure App Proxy, administrators can easily publish private, on-premises web applications by installing the connector on an on-premises server. Administrators can leverage Azure AD authentication and conditional access policies to ensure device compliance or enforce multifactor authentication (MFA), if required. Microsoft Entra Private Access extends the capabilities of the Azure Application Proxy to support TCP and UDP-based applications.

Private Access vs. Always On VPN

Microsoft Entra Private Access will be a compelling alternative to Always On VPN in the future. Specifically, organizations using native Azure AD join devices could benefit tremendously from this technology. Microsoft Entra Private Access is much simpler to implement than Always On VPN and requires no on-premises infrastructure other than the Azure Application Proxy connector. Using Microsoft Entra Private Access also means that no inbound access from the Internet is required, making the solution inherently more secure and reducing the public attack surface. For organizations using hybrid Azure AD join, Always On VPN continues to be the best Microsoft solution for these scenarios.

References

Microsoft Entra Expands into Security Service Edge (SSE)

Microsoft Entra – Secure Access for a Connected World

Microsoft Entra Internet Access Preview

Microsoft Entra Private Access Preview

What is Zero Trust?

What is Zero Trust Network Access?

What is Security Service Edge (SSE)?

What is Secure Access Service Edge (SASE)?

What’s the Difference Between SSE and SASE?

Contact Us

I’ve had the privilege of participating in the private preview for Microsoft Entra Internet Access and Private Access. If you’d like to learn more about these technologies and how they can help your organization, fill out the form below, and I’ll provide more information.

8 Comments
by Richard M. Hicks on July 17, 2023  •  Permalink
Posted in administration, Always On VPN, AOVPN, authentication, Azure, Azure Active Directory, Azure AD, Azure AD Join, Azure App Proxy, Azure Application Proxy, Azure Conditional Access, cloud, Cloud Service, Conditional Access, Enterprise, enterprise mobility, Entra, Entra ID, Entra Internet Access, Entra Private Access, HAADJ, Hybrid Azure AD Join, Microsoft, Microsoft Entra, Microsoft Entra ID, Microsoft Entra Internet Access, Microsoft Entra Private Access, Mobility, Multifactor Authentiction, public cloud, Remote Access, SASE, Secure Access Service Edge, Secure Service Edge, Secure Web Gateway, Security, SSE, SWG, VPN, Windows 11, Zero Trust, Zero Trust Network Access, ZTNA
Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Posted by Richard M. Hicks on July 17, 2023

https://directaccess.richardhicks.com/2023/07/17/microsoft-entra-global-secure-access/

« Older Posts
Newer Posts »