All posts in category Azure VPN Gateway

Always On VPN Load Balancing for RRAS in Azure

Always On VPN Load Balancing for RRAS in AzurePreviously I wrote about Always On VPN options for Microsoft Azure deployments. In that post I indicated that running Windows Server with the Routing and Remote Access Service (RRAS) role for VPN was an option to be considered, even though it is not a formally supported workload. Despite the lack of support by Microsoft, deploying RRAS in Azure works well and is quite popular. In fact, I recently published some configuration guidance for RRAS in Azure.

Load Balancing Options for RRAS

Multiple RRAS servers can be deployed in Azure to provide failover/redundancy or to increase capacity. While Windows Network Load Balancing (NLB) can be used on-premises for RRAS load balancing, NLB is not supported and doesn’t work in Azure. With that, there are several options for load balancing RRAS in Azure. They include DNS round robin, Azure Traffic Manager, the native Azure load balancer, Azure Application Gateway, or a dedicated load balancing virtual appliance.

DNS Round Robin

The easiest way to provide load balancing for RRAS in Azure is to use round robin DNS. However, using this method has some serious limitations. Simple DNS round robin can lead to connection attempts to a server that is offline. In addition, this method doesn’t accurately balance the load and often results in uneven distribution of client connections.

Azure Traffic Manager

Using Azure Traffic Manager is another alternative for load balancing RRAS in Azure. In this scenario each VPN server will have its own public IP address and FQDN for which Azure Traffic Manager will intelligently distribute traffic. Details on configuring Azure Traffic Manager for Always On VPN can be found here.

Azure Load Balancer

The native Azure load balancer can be configured to provide load balancing for RRAS in Azure. However, it has some serious limitations. Consider the following.

  • Supports Secure Socket Tunneling Protocol (SSTP) only.
  • Basic health check functionality (port probe only).
  • Limited visibility.
  • Does not work with IKEv2.
  • Does not support TLS offload for SSTP.

More information about the Azure Load Balancer can be found here.

Azure Application Gateway

The Azure Application Gateway can be used for load balancing RRAS SSTP VPN connections where advanced capabilities such as enhanced health checks and TLS offload are required. More information about the Azure Application Gateway can be found here.

Load Balancing Appliance

Using a dedicated Application Delivery Controller (ADC), or load balancer is a very effective way to eliminate single points of failure for Always On VPN deployments hosted in Azure. ADCs provide many advanced features and capabilities to ensure full support for all RRAS VPN protocols. In addition, ADCs offer much better visibility and granular control over VPN connections. There are many solutions available as virtual appliances in the Azure marketplace that can be deployed to provide RRAS load balancing in Azure.

Summary

Deploying Windows Server RRAS in Azure for Always On VPN can be a cost-effective solution for many organizations. Although not a formally supported workload, I’ve deployed it numerous times and it works quite well. Consider using a dedicated ADC to increase scalability or provide failover and redundancy for RRAS in Azure whenever possible.

Additional Information

Windows 10 Always On VPN Options for Azure Deployments

Windows 10 Always On VPN and RRAS in Microsoft Azure

Windows 10 Always On VPN with Microsoft Azure Gateway

9 Comments
by Richard M. Hicks on October 28, 2019  •  Permalink
Posted in Always On VPN, AOVPN, application delivery controller, Azure, Azure Application Gateway, Azure Load Balancer, Azure Traffic Manager, Azure VPN, Azure VPN Gateway, cloud, Enterprise, enterprise mobility, High Availability, Load Balancing, Mobility, public cloud, Remote Access, routing and remote access service, RRAS, SSL, SSL and TLS, TLS, VPN, Windows 10, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Posted by Richard M. Hicks on October 28, 2019

https://directaccess.richardhicks.com/2019/10/28/always-on-vpn-load-balancing-for-rras-in-azure/

Always On VPN and RRAS in Azure

Always On VPN and RRAS in AzureWhen deploying Windows 10 Always On VPN, it may be desirable to host the VPN server in Microsoft’s Azure public cloud. Recently I wrote about Always On VPN deployment options in Azure, and in that post I indicated that deploying Windows Server and the Routing and Remote Access Service (RRAS) was one of those options. Although not formally supported by Microsoft, RRAS is often deployed in Azure because it is cost-effective, easy to manage, and provides flexible scalability.

Supportability

It’s important to state once again that although it is possible to successfully deploy Windows Server with RRAS in Azure to support Always On VPN, as of this writing it is not a formally supported workload. If the administrator makes the decision to deploy RRAS in Azure, they must also accept that Microsoft may refuse to assist with troubleshooting in this specific deployment scenario.

Always On VPN and RRAS in Azure

Reference: https://support.microsoft.com/en-us/help/2721672/microsoft-server-software-support-for-microsoft-azure-virtual-machines

Azure Prerequisites

The configuration of RRAS is identical to on-premises, with a few additional steps required by Azure infrastructure.

Windows Server

RRAS can be configured on any Windows Server virtual machine supported in Microsoft Azure. As with on-premises deployments, Server GUI and Core are supported. Domain-join is optional. The server can be deployed with one network interface or two.

Public IP

A public IP address must be assigned to the VPN server’s external network interface, or the internal interface if the VPN server is configured with a single network adapter. The IP address can be static or dynamic. When using a dynamic IP address, configure a CNAME record in DNS that points to the name configured for the IP address in Azure. If using a static IP address, an A host record can be configured pointing directly to the IP address.

Network Security Group

A Network Security Group (NSG) must be configured and assigned to the VPN server’s external or public-facing network interface that allows the following protocols and ports inbound.

  • TCP port 443 (SSTP)
  • UDP port 500 (IKEv2)
  • UDP port 4500 (IKEv2 NAT traversal)

RRAS in Azure

Below are the infrastructure requirements for supporting Windows Server RRAS VPN in Azure.

Client IP Subnet

Static IP address pool assignment must be used with RRAS. Using DHCP for VPN client IP address assignment in Azure is not supported and will not work. The IP subnet assigned to VPN clients by RRAS must be unique and not overlap with any existing Azure VNet subnets. If more than one VPN server is deployed, each server should be configured to assign a unique subnet for its clients.

IP Forwarding

IP forwarding must be enabled on the VPN server’s internal network interface. Follow the steps below to enable IP forwarding.

1. In the Azure portal, open the properties page for the internal network interface for the VPN server.
2. Click IP configurations in the navigation pane.
3. Click Enabled next to IP forwarding.
4. Click Save.

Always On VPN and RRAS in Azure

Routing

Azure must be configured to route IP traffic from VPN clients back to the VPN server. Follow the steps below to create and assign a routing table in Azure.

1. Click Create Resource.
2. Enter “Route Table” in the search field and press Enter.
3. Click Route Table.
4. Click Create.
5. Enter a descriptive name for the route table in the Name field.
6. Choose an appropriate subscription from the Subscription drop-down list.
7. Select the resource group where the VPN server(s) reside.
8. Select the best location to deploy the route table resource from the Location drop-down list.
9. If the administrator wants to have the VPN client IP subnet route information published automatically, select Enabled for Virtual network gateway route propagation.
10. Click Create.

Always On VPN and RRAS in Azure

Once complete, follow the steps below to define the route for VPN clients.

1. Open the properties page for the route table.
2. Click Routes in the navigation pane.
3. Click Add.
4. Enter a descriptive name in the Route name filed.
5. Enter the IP subnet assigned to VPN clients in the Address prefix field.
6. Select Virtual appliance from the Next hop type drop-down list.
7. Enter the IPv4 address assigned to the VPN server’s internal network interface in the Next hop address field.
8. Click Ok.
9. Repeat the steps above for each VPN server configured in Azure.

Always On VPN and RRAS in Azure

Finally, follow the steps below to assign the route table to an Azure VNet subnet.

1. Open the properties page for the route table.
2. Click Subnets in the navigation pane.
3. Click Associate.
4. Click Virtual network.
5. Choose the appropriate Azure VNet.
6. Click Subnet.
7. Choose an Azure VNet subnet to assign the route table to.
8. Click Ok.
9. Repeat the steps above to assign the route table to any Azure VNet subnet that must be accessible by VPN clients. If VPN clients need access to on-premises resources via Azure site-to-site gateway, assign the route table to the Azure VPN gateway subnet.

Always On VPN and RRAS in Azure

Note: Azure only supports the assignment of one route table per subnet. If a route table is currently assigned, the VPN client subnet route can be added to an existing route table, if necessary.

Summary

Administrators have many choices when it comes to support Always On VPN connections hosted in Azure. RRAS on Windows Server can be an effective solution, assuming you can live without formal support. If having a formally supported solution is a hard requirement, consider deploying Always On VPN using the native Azure VPN gateway or another third-part Network Virtual Appliance (NVA).

Additional Information

Windows 10 Always On VPN with Azure Gateway

Windows 10 Always On VPN Options for Azure Deployments

Windows 10 Always On VPN Multisite with Azure Traffic Manager

46 Comments
by Richard M. Hicks on September 9, 2019  •  Permalink
Posted in Always On VPN, AOVPN, Azure, Azure VPN, Azure VPN Gateway, cloud, Enterprise, enterprise mobility, Mobility, public cloud, Remote Access, routing and remote access service, RRAS, Security, Windows 10, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Tagged , , , , , , , , , , , , , , , , , , , , , , , , , ,

Posted by Richard M. Hicks on September 9, 2019

https://directaccess.richardhicks.com/2019/09/09/always-on-vpn-and-rras-in-azure/

Always On VPN with Azure Gateway

Always On VPN with Azure GatewayRecently I wrote about VPN server deployment options for Windows 10 Always On VPN in Azure. In that post I indicated the native Azure VPN gateway could be used to support Always On VPN connections using Internet Key Exchange version 2 (IKEv2) and Secure Socket Tunneling Protocol (SSTP). In this post I’ll outline the requirements and configuration steps for implementing this solution.

Requirements

To support Always On VPN, point-to-site VPN connections must be enabled on the Azure VPN gateway. Not all Azure VPN gateways are alike, and point-to-site connections are not supported in all scenarios. For Always On VPN, the Azure VPN gateway must meet the following requirements.

VPN SKU

The Azure VPN gateway SKU must be VpnGw1, VpnGw2, VpnGw3, VpnGw1AZ, VpnGw2AZ, or VpnGw3AZ. The Basic SKU is not supported.

VPN Type

The VPN type must be route-based. Policy-based VPN gateways are not supported for point-to-site VPN connections.

Limitations

Using the Azure VPN gateway for Always On VPN may not be ideal in all scenarios. The following limitations should be considered thoroughly before choosing the Azure VPN gateway for Always On VPN.

Device Tunnel

RADIUS/EAP authentication for user tunnel connections is not supported if the Azure VPN gateway is configured to support device tunnel with machine certificate authentication.

Maximum Connections

A maximum of 250, 500, and 1000 concurrent IKEv2 connections are supported when using the VpnGw1/AZ, VpnGw2/AZ, and VpnGw3/AZ SKUs, respectively (x2 for active/active gateway deployments). In addition, a maximum of 128 concurrent SSTP connections are supported for all VPN gateway SKUs (x2 for active/active gateway deployments).

Always On VPN with Azure Gateway

Reference: https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-about-vpngateways#gwsku

RADIUS Requirements

To support Always On VPN connections, the Azure VPN gateway must be configured to authenticate to a RADIUS server. The RADIUS server must be reachable from the VPN gateway subnet. The RADIUS server can be hosted in Azure or on-premises. Before proceeding, ensure that any network routes, firewall rules, and site-to-site VPN tunnel configuration is in place to allow this communication.

RADIUS Configuration

Guidance for configuring Windows Server NPS for Always On VPN can be found here. The only difference when configuring NPS for use with Azure VPN gateway is the RADIUS client configuration.

Open the NPS management console (nps.msc) and follow the steps below to configure Windows Server NPS to support Always On VPN client connections from the Azure VPN gateway.

1. Expand RADIUS Clients and Servers.
2. Right-click RADIUS Clients and choose New.
3. Enter a descriptive name in the Friendly name field.
4. Enter the Azure VPN gateway subnet using CIDR notation in the Address (IP or DNS) field. The gateway subnet can be found by viewing the properties of the Azure VPN gateway in the Azure portal.
5. Enter the shared secret to be used for RADIUS communication in the Shared secret field.

Always On VPN with Azure Gateway

Azure VPN Gateway Configuration

To begin, provision a Virtual Network Gateway in Azure that meets the requirements outlined above. Guidance for implementing an Azure VPN gateway can be found here. Once complete, follow the steps below to enable support for Always On VPN client connections.

Enable Point-to-Site

Perform the following steps to enable point-to-site VPN connectivity.

1. In the navigation pane of the Azure VPN gateway settings click Point-to-site configuration.
2. Click Configure Now and specify an IPv4 address pool to be assigned to VPN clients. This IP address pool must be unique in the organization and must not overlap with any IP address ranges defined in the Azure virtual network.
3. From the Tunnel type drop-down list select IKEv2 and SSTP (SSL).
4. In the RADIUS authentication field enter the IPv4 address of the RADIUS server. At the time of this writing only a single IPv4 address is supported. If RADIUS redundancy is required, consider creating a load balanced NPS cluster.
5. In the Server secret field enter the RADIUS shared secret.
6. Click Save to save the configuration.

Always On VPN with Azure Gateway

VPN Client Configuration

Perform the following steps to configure a Windows 10 VPN client to connect to the Azure VPN gateway.

Download VPN Configuration

1. Click Point-to-site configuration.
2. Click Download VPN client.
3. Select EAPMSCHAv2 (yes, that’s correct even if EAP-TLS will be used!)
4. Click Download.
5. Open the downloaded zip file and extract the VpnSettings.XML file from the Generic folder.
6. Copy the FQDN in the VpnServer element in VpnSettings.XML. This is the FQDN that will be used in the template VPN connection and later in ProfileXML.

Always On VPN with Azure Gateway

Create a Test VPN Connection

On a Windows 10 device create a test VPN profile using the VPN server address copied previously. Configure EAP settings to match those configured on the NPS server and test connectivity.

Create an Always On VPN Connection

Once the VPN has been validated using the test profile created previously, the VPN server and EAP configuration from the test profile can be used to create the Always On VPN profile for publishing using Intune, SCCM, or PowerShell.

IKEv2 Security Configuration

The default IKEv2 security parameters used by the Azure VPN gateway are better than Windows Server, but the administrator will notice that a weak DH key (1024 bit) is used in phase 1 negotiation.

Always On VPN with Azure Gateway

Use the following PowerShell commands to update the default IKEv2 security parameters to recommended baseline defaults, including 2048-bit keys (DH group 14) and AES-128 for improved performance.

Connect-AzAccount
Select-AzSubscription -SubscriptionName [Azure Subscription Name]

$Gateway = [Gateway Name]
$ResourceGroup = [Resource Group Name]

$IPsecPolicy = New-AzVpnClientIpsecParameter -IpsecEncryption AES128 -IpsecIntegrity SHA256 -SALifeTime 28800 -SADataSize 102400000 -IkeEncryption AES128 -IkeIntegrity SHA256 -DhGroup DHGroup14 -PfsGroup PFS14

Set-AzVpnClientIpsecParameter -VirtualNetworkGatewayName $Gateway -ResourceGroupName $ResourceGroup -VpnClientIPsecParameter $IPsecPolicy

Note: Be sure to update the cryptography settings on the test VPN connection and in ProfileXML for Always On VPN connections to match the new VPN gateway settings. Failing to do so will result in an IPsec policy mismatch error.

Additional Information

Microsoft Azure VPN Gateway Overview

About Microsoft Azure Point-to-Site VPN

Windows 10 Always On VPN IKEv2 Security Configuration

 

 

 

74 Comments
by Richard M. Hicks on August 26, 2019  •  Permalink
Posted in Always On VPN, AOVPN, Azure, Azure VPN, Azure VPN Gateway, cloud, device tunnel, Enterprise, enterprise mobility, IKEv2, InTune, Microsoft Intune, Mobility, network policy server, NPS, PowerShell, ProfileXML, Remote Access, Security, SSL, SSL and TLS, SSTP, TLS, user tunnel, VPN, Windows 10, XML
Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Posted by Richard M. Hicks on August 26, 2019

https://directaccess.richardhicks.com/2019/08/26/always-on-vpn-with-azure-gateway/

« Older Posts
Newer Posts »