Always On VPN and NPS AD Registration

Always On VPN Users Prompted for Certificate

Windows Server Network Policy and Access Services (NPAS, more commonly called NPS) is a popular solution used in Always On VPN deployments to support Active Directory authentication for user-based VPN connections. NPS is integrated with Active Directory to perform certificate-based authentication. With additional configuration, NPS can apply specific settings to an individual connection by reading the properties of the user’s AD account.

Dial-In Properties

Administrators can allow or deny network access, assign a static IP address, or assign a static route on a per-user basis. This information is defined on the Dial-In tab of the user account in Active Directory Users and Computers (dsa.msc).

Register in AD

Registering the NPS server in Active Directory is strictly optional. It is not required to perform user authentication. However, administrators must register the NPS server in Active Directory to assign connection properties per user. Active Directory registration for NPS allows the NPS server to read the properties of individual Active Directory user accounts. Active Directory registration for NPS is accomplished in one of several ways.

NPS Management Console

On each NPS server, open the NPS management console (nps.msc), right-click the server, and choose Register server in Active Directory.

Command Line

Administrators can register the NPS server in Active Directory by opening an elevated command window and running the following command.

netsh.exe nps add registeredserver <domain> <host>

Where <domain> is the Active Directory domain where you want to add the NPS server to the RAS and IAS Servers security group, and <host> is the hostname of the NPS server to register.

For example:

netsh.exe nps add registeredserver lab.richardhicks.net nps1

ADUC

Registering an NPS server in Active Directory does nothing more than add the NPS server to the RAS and IAS Servers domain security group. Administrators can open ADUC and add NPS servers to the group directly if required.

Note: Registering an NPS server in Active Directory using the NPS console or the command line adds the NPS server to the RAS and IAS Servers group in the domain to which the NPS server belongs. If user accounts are in a different domain, NPS servers must also be added to the RAS and IAS Servers group in those domains.

NPS Policy

In addition to registering the NPS server in Active Directory, administrators must ensure that the option to Ignore user account dial-in properties on the Network Policy used for Always On VPN is not checked.

Additional Information

Always On VPN and NPS Server Load Balancing

Always On VPN NPS Auditing and Logging

Always On VPN NPS RADIUS Configuration Missing

Considerations for Always On VPN with Azure VPN Gateway and Virtual WAN

Always On VPN Device Tunnel and Custom Cryptography Native Support Now in Intune

Organizations migrating on-premises applications, data, and infrastructure to the cloud may also consider terminating Always On VPN connections there. Using one of the native Azure VPN services might be compelling at first glance. After all, having an Azure-managed VPN gateway service sounds intuitive. However, some severe limitations exist for using Azure VPN services for Always On VPN deployments.

Azure VPN Gateway

The following are limitations for Always On VPN with Azure VPN gateway.

Authentication Methods

Azure VPN gateway supports both EAP and machine certificate authentication. However, it can only support one authentication method at a time. With only EAP or certificate authentication, administrators must choose between a device or user tunnel. A single Azure VPN gateway cannot support both at the same time. For native Entra ID joined devices, this is not a problem. However, for native on-premises Active Directory or hybrid Entra ID joined devices, this is a problem, as the device tunnel is essential in these scenarios.

Note: Technically speaking, administrators could deploy another Azure VPN gateway to work around this limitation. However, Azure limits VPN gateway deployments to one per virtual network. This requires administrators to deploy a second VPN gateway in a separate virtual network, which then requires virtual network peering to be enabled, complicating the configuration greatly.

SSTP

Although the Azure VPN gateway supports SSTP, it is, unfortunately, a second-class citizen. Today, all SKUs of the Azure VPN gateway are limited to just 128 SSTP connections (256 in active/active mode). There is currently no way to increase this. If more than 256 connections are required, you must use IKEv2.

RADIUS

In addition, there is currently no option to change the default timeout value (30 seconds) for RADIUS authentication requests. This short timeout value presents a challenge when using MFA with the NPS extension or with Azure Conditional Access, as users may be unable to respond to the push notification before the timeout expires, resulting in failed authentication attempts.

In addition, Azure does not support routing traffic to on-premises RADIUS servers over ExpressRoute connections. In this scenario, administrators must route RADIUS traffic to on-premises servers over a site-to-site connection.

Geographic Redundancy

Geographic redundancy using Azure Traffic Manager (or another global server load balancer) with two or more gateways is not supported when using the Azure VPN gateway. Azure manages the certificate used on the gateway, which includes a certificate with the subject name of the individual gateway. There is no option to supply a custom certificate with a global hostname in the subject, which is required to support geographic redundancy. With that, administrators are limited to the redundancy provided natively by the Azure VPN gateway.

IPv6

Azure does not support Azure VPN gateway in a virtual network that includes IPv6 addressing.

Azure Virtual WAN

Azure Virtual WAN includes many of the same limitations as the Azure VPN gateway, in addition to the following.

SSTP

Unlike the Azure VPN gateway, there is no support for SSTP in Azure Virtual WAN.

IPv6

IPv6 is not currently supported at all in Azure Virtual WAN.

Summary

Intuitively, it seems that leveraging native Azure VPN gateway services would be ideal. However, due to the limitations outlined in this article, administrators must decide carefully if any of these prevent adoption in their environment. Although not formally supported, many organizations deploy Windows Server Routing and Remote Access (RRAS) servers in Azure to address these limitations.

Additional Information

Always On VPN Options for Azure Deployments

Always On VPN with Azure Gateway

Always On VPN Device Tunnel with Azure VPN Gateway

Always On VPN and RRAS in Azure

What is Azure VPN Gateway?

What is Azure Virtual WAN?

Microsoft Intune Certificate Connector Failure

The Microsoft Intune Certificate Connector enables the provisioning and de-provisioning of on-premises PKI certificates for Intune-managed devices. Always On VPN administrators using Intune to deploy certificates with the Intune Certificate Connector using either PKCS or SCEP may encounter a scenario where certificates are no longer being provisioned to users or devices after working reliably previously.

Certificate Not Found

When this issue occurs, users will no longer be able to access the VPN and receive a “certificate could not be found that can be used with this Extensible Authentication Protocol” error message.

Always On VPN error stating a certificate could not be found that can be used with this Extensible Authentication Protocol

Connector Status

To determine the status of the Intune Certificate Connector, open the Microsoft Intune Admin Center (https://intune.microsoft.com) and navigate to Tenant Administration > Connectors and Tokens > Certificate Connectors. The status of the certificate connector server will be in Error.

Intune admin center Certificate Connectors page showing the connector in an Error state

Event Log

Open the event log on the server where the Intune Certificate Connector is installed. Navigate to Applications and Services Logs > Microsoft > Intune > CertificateConnectors > Operational. Here, you will find a variety of warning and error messages.

Event ID 5001

This is a warning from the CertificateConnectors source with event ID 5001 in the Task Category HealthMessageUploadFailedAttempt with the following details.

PKI Create Service:

Failed to upload health messages. Requeuing messages.

Event ID 1003

This is an error from the CertificateConnectors source with event ID 1003 in the Task Category PkcsDownloadFailure with the following details.

PKI Create Service:

Failed to download PKCS requests.

Event ID 2

This is an error from the CertificateConnectors source with event ID 2 in the Task Category Exception with the following details.

PKI Create Service:

Microsoft.Intune.Connectors.PkiCreateProcessor.Process threw an exception.

Expired Certificate

The warning and error messages recorded in the event log indicate an expired certificate on the Intune Certificate Connector server. Open the local computer certificate store (certlm.msc) on the server where the Intune Certificate Connector is installed. Review the expiration date of the certificate issued by Microsoft Intune ImportPFX Connector CA. It is most likely expired.

Local computer certificate store on the Intune Certificate Connector server showing the expired connector certificate

Click on the Certification Path tab to view the certificate status.

Certificate Certification Path tab showing the certificate has expired

Renew Certificate

To renew this certificate, you must reinstall the Intune Certificate Connector. However, you do not have to uninstall it first. To renew the certificate, navigate to C:\Program Files\Microsoft Intune\PFXCertificateConnector\ConnectorUI and double-click on PFXCertificateConnectorUI.exe. Follow the prompts without making changes to the existing configuration. You’ll be prompted for the service account password (if using a domain account) and proxy credentials (if using a proxy server). In addition, you’ll be asked to sign in to Entra ID (formerly Azure AD). Be sure to provide credentials that are a global administrator and have an Intune license assigned. Once the process is complete, a new certificate will be installed in the local computer certificate store.

Intune Configuration

After updating the Intune Certificate Connector, a new certificate connector appears in the Intune Admin Center. You can now safely delete the old connector and rename the new one accordingly.

Intune admin center listing the old and new Intune Certificate Connector entries

Redundancy

Deploying multiple instances of the Intune Certificate Connector is an excellent way to avoid future outages! It’s also a good idea to stagger their installation by a few months to ensure that a future certificate expiration doesn’t result in lost functionality. If you’ve deployed Intune Certificate Connectors recently, consider updating them at rotating intervals so certificates expire at different times.

Additional Information

Enterprise PKI with Microsoft Active Directory Certificate Services

Intune Certificate Connector Configuration Failed

Intune Certificate Connector Service Account and PKCS

Intune Certificate Connector Configuration Failure

Microsoft Intune Learning Resources for Always On VPN Administrators

Always On VPN November 2023 Security Updates

Microsoft has released its security updates for November 2023. For Always On VPN administrators, it’s a light month, with just a single CVE affecting Always On VPN infrastructure.

PEAP

CVE-2023-36028 addresses a remote code execution (RCE) vulnerability in the Microsoft Protected Extensible Authentication Protocol (PEAP). An attacker could exploit this vulnerability by sending a specially crafted PEAP packet to a Windows Network Policy Server (NPS). This attack does not require authentication or user interaction.

Affected Systems

This PEAP vulnerability affects only NPS servers configured to support PEAP authentication explicitly. PEAP authentication is a best practice configuration for Always On VPN deployments and is widely deployed. NPS servers deployed to support other services, such as Wi-Fi or router and switch access that are configured to allow PEAP authentication, are also affected.

Exposure

NPS servers are not (or should not be!) exposed directly to the public Internet. This limits the attack surface to adversaries already on the internal network.

Mitigation

Microsoft suggests disabling PEAP authentication support on NPS servers until the update is applied. However, this would break the majority of Always On VPN deployments today. Since disabling PEAP isn’t a viable option, administrators can reduce their attack surface by updating the NPS firewall rules to restrict access only to authorized VPN servers or other network devices until their systems are fully updated.

Additional Information

November 2023 Security Updates

CVE-2023-36028 PEAP Remote Code Execution Vulnerability

Azure Conditional Access Certificates with SID Information Now Available

I recently wrote about changes to certificate-based authentication affecting Always On VPN implementations. These changes were introduced by Microsoft’s security update KB5014754. When the update is installed on domain controllers and enterprise Certification Authorities (CAs), administrators can perform strong user mapping for certificates used for Active Directory authentication. However, when first introduced, the update came with some serious limitations that prevented administrators from enabling full enforcement mode for certificate mapping.

Limitations

When KB5014754 is installed on an enterprise issuing CA, a new certificate extension (1.3.6.1.4.1.311.25.2) is added to the issued certificate that includes the principal’s (user or device) Security Identifier (SID). However, this only occurs when an online template is used. An online template is one with the subject name built from Active Directory information. The SID is not embedded in certificates issued using an offline template. Offline templates are templates where the subject name is supplied in the request. There are two scenarios where this causes problems for Always On VPN.

Microsoft Intune

Certificates delivered with Microsoft Intune via the Intune Certificate Connector use an offline template. This applies to certificates using PKCS or SCEP. Today, the SID is not embedded by issuing CAs using offline templates.

Azure Conditional Access

The short-lived certificate issued by Azure when Conditional Access is configured for Always On VPN did not include the SID. However, that recently changed.

Recent Updates

Today we can scratch Azure Conditional Access off the list of limitations for Always On VPN. Microsoft recently introduced support for the new SID extension in Azure Conditional Access certificates, as shown here.

Now when an Azure Conditional Access certificate is issued to an on-premises user or device account that is synced with Azure Active Directory, Azure Conditional Access will include the SID information in the issued short-lived certificate.

Intune

Unfortunately, we’re still waiting for Microsoft to address the limitation with certificates delivered using Microsoft Intune. Hopefully we’ll see an update for that later this year.  

Additional Information

Certificate-Based Authentication Changes and Always On VPN

Microsoft KB5014754

Digital Certificates and TPM

Microsoft Intune Certificate Connector Service Account and PKCS

Always On VPN and the PSPKI PowerShell Module

Certificates are a crucial part of a secure Always On VPN implementation. Certificates are phishing-resistant forms of authentication that, when configured correctly, provide robust and multifactor authentication for remote access users and devices.

AD CS

Most commonly, certificates are issued by an on-premises Microsoft Active Directory Certificate Services (AD CS) server. Administrators configure and deploy a Certification Authority infrastructure to issue and manage user and device authentication certificates in their organization. CA certificates are also required on the VPN server to support Always On VPN device tunnel connections and IKEv2 user tunnel connections. The NPS server also requires an enterprise CA certificate. Of course, the CA can issue certificates for other purposes, including Wi-Fi authentication, document signing, and code signing, just to name a few.

PSPKI

PSPKI is a PowerShell module available in the PowerShell Gallery for configuring, managing, and troubleshooting Microsoft AD CS. Created by Vadims Podans of PKI Solutions, PSPKI includes over 100 functions for various AD CS and certificate-related tasks. Always On VPN administrators will find this PowerShell module helpful when configuring and troubleshooting certificate-related issues for their Always On VPN deployments.

Note: The AD CS remote server administration tools (RSAT) must be installed to access all of the PSPKI module’s functionality.

Installation

Run the following PowerShell command to install the PSPKI PowerShell module.

Install-Module -Name PSPKI

Always On VPN and PSPKI

Always On VPN Administrators will immediately find a few PSPKI functions helpful when implementing and supporting Always On VPN.

Test-WebServerSSL – This function will connect to a remote web server and display details about the TLS certificate included in the response. This can be especially helpful when troubleshooting SSTP VPN connections.

Convert-PfxToPem – This is a handy utility for converting a PFX file to the PEM format. This is commonly required when importing CA certificates on non-Microsoft platforms, security devices, and load balancers.

Convert-PemToPfx – Occasionally, administrators must convert a certificate and private key in PEM format to PFX to install on a Windows server. This tool allows administrators to perform this task easily.

Get-CertificationAuthority – This function quickly enumerates all enterprise CA servers and displays information about their hostname, accessibility, service status, and type.

Ping-ICertInterface – This function helps troubleshoot CA connectivity issues. Administrators can quickly determine if a CA is reachable and capable of issuing a certificate using this command.

Get-CaTemplate – This command displays a list of certificate templates published on the specified target CA server. The certificate template’s display name and the minimum support CA version are provided. In addition, the output indicates if certificate autoenrollment is enabled on the template.

Much More

The PSPKI PowerShell module for AD CS has many tools for configuring and managing AD CS. PSPKI recently received a major update to version 4.0. Download and install PSPKI today. It will make your life easier, I can assure you!

Additional Information

PSPKI PowerShell Module – PowerShell Gallery

PSPKI PowerShell Module – GitHub

AOVPNTools PowerShell Module – PowerShell Gallery

AOVPNTools PowerShell Module – GitHub

InboxAccountingDatabaseManagement PowerShell Module

InboxAccontingDatabaseManagement – PowerShell Gallery

InboxAccountingDatabaseManagement – GitHub

Always On VPN Ask Me Anything (AMA) June 2023

It’s that time again! Have questions about Always On VPN? Are you having a specific issue you can’t figure out? Need information about configuration options? Here’s your chance to get your questions answered! Join me next week on Thursday, June 29, 2023, at 10:00 AM PDT (UTC -7) for an opportunity to ask me anything (AMA!) about Microsoft Windows Always On VPN and related technologies.

Missed out on this event? You can find the session recording on YouTube here.

The AMA will be an open forum session where we can all talk shop about Always On VPN. It’s a great chance to learn new things and share experiences with your peers. We’ll discuss known issues and limitations, best practices, and more.

Everyone is welcome. Don’t miss out on this excellent opportunity to connect and learn. Register today!

Can’t make the session? Register anyway and I’ll send you the link to the recording as soon as it is availalbe!

Always On VPN Ask Me Anything (AMA) March 2023

It’s that time again! Have questions about Always On VPN? Are you having a specific issue you can’t figure out? Need information about configuration options? Here’s your chance to get your questions answered! Join me next week on Thursday, March 23, 2023, at 10:00 AM PDT (UTC -7) for an opportunity to ask me anything (AMA!) about Microsoft Windows Always On VPN and related technologies.

The AMA will be an open forum session where we can all talk shop about Always On VPN. It’s a great chance to learn new things and share experiences with your peers. We’ll discuss known issues and limitations, best practices, and more.

Update: Missed the session? You can watch it here!

Everyone is welcome. Don’t miss out on this excellent opportunity to connect and learn. Register today!

Can’t make the session? Register anyway and I’ll send you the link to the recording as soon as it is availalbe!

Always On VPN NPS and PEAP Vulnerabilities

The February 2023 security updates for Windows Server address multiple vulnerabilities that affect Microsoft Always On VPN administrators. This latest update addresses multiple critical and important vulnerabilities in the Network Policy Server (NPS), commonly used to perform RADIUS authentication for Always On VPN servers. Specifically, there are several Remote Code Execution (RCE) and Denial of Service (DoS) vulnerabilities with Protected Extensible Authentication Protocol (PEAP). PEAP with user authentication certificates is the authentication protocol of choice for Always On VPN user tunnel authentication.

Vulnerabilities

The following is a list of vulnerabilities in PEAP addressed in the February 2023 security update.

  • CVE-2023-21689 – Microsoft PEAP Remote Code Execution Vulnerability (critical)
  • CVE-2023-21690 – Microsoft PEAP Remote Code Execution Vulnerability (critical)
  • CVE-2023-21691 – Microsoft PEAP Information Disclosure vulnerability (important)
  • CVE-2023-21692 – Microsoft PEAP Remote Code Execution Vulnerability (critical)
  • CVE-2023-21695 – Microsoft PEAP Remote Code Execution Vulnerability (important)
  • CVE-2023-21701 – Microsoft PEAP Denial of Service Vulnerability (important)

Mitigation

Unauthenticated attackers can exploit the RCE vulnerabilities in PEAP on Microsoft Windows NPS servers. However, NPS servers should not be exposed directly to the Internet and would require an attacker to have access to the internal network already. However, administrators are advised to apply this update to their NPS servers as soon as possible. In addition, organizations that deploy the NPS role on enterprise domain controllers should update immediately.

Additional Information

February 2023 Update for Windows Server 2022 (KB5022842)

February 2023 Update for Windows Server 2019 (KB022840)

February 2023 Update for Windows Server 2016 (KB5022838)

Always On VPN Authentication Failed Reason Code 16

Strong authentication is essential for remote access to on-premises resources over the public Internet. Using the Protected Extensible Authentication Protocol (PEAP) in combination with user certificates issued by the organization’s internal certification authority (CA) provides high assurance for remote user authentication. It includes the added benefit of making the Always On VPN connection completely seamless for the user, as their certificate is presented to the authentication server transparently during VPN connection establishment. Using PEAP with user certificates is the recommended authentication method for Always On VPN deployments.

Reason Code 16

When configuring Always On VPN to use PEAP with client authentication certificates, administrators may encounter a scenario in which a user has a valid certificate. Yet, their authentication request is rejected by the Network Policy Server (NPS) server when attempting to connect remotely. Looking at the Security event log on the NPS server, administrators will find a corresponding event ID 6273 in the Network Policy Server task category from the Microsoft Windows security auditing event source. In the Authentication Details section, you’ll find that the reason code for the failed request is Reason Code 16, with the following reason specified.

“Authentication failed due to a user credentials mismatch. Either the user name provided does not map to an existing user account or the password was incorrect”.

Password Incorrect?

The reason code indicates the user may have entered an incorrect password. However, the user does not enter their password when using PEAP with client authentication certificates, so there’s no chance the password was entered incorrectly.

TPM

I have increasingly encountered this scenario with many customers deploying Always On VPN over the last year or so. This error is often caused by a known issue with older TPM models. Specifically, those with a TPM specification sub-version of 1.16 and earlier. You can view these TPM details by opening the Windows Settings app and entering ‘security processor’ in the search field.

Workaround

These older TPM models seem to have an issue with RSA-PSS signature algorithms, as described here. If possible, administrators should upgrade devices with older TPM versions to ensure the highest level of security and assurance for their remote users. However, in cases where that is not feasible, administrators can remove RSA-PSS signature algorithms from the registry, which forces the use of a different signature algorithm and seems to restore functionality.

To do this, open the registry editor (regedit.exe) and navigate to the following registry key.

HKLM\SYSTEM\CurrentControlSet\Control\Cryptography\
Configuration\Local\SSL\00010003\

Double-click the Functions entry and remove the following algorithms from the Value data section.

  • RSAE-PSS/SHA256
  • RSAE-PSS/SHA384
  • RSAE-PSS/SHA512

Once complete, reboot the device and test authentication once again.

Intune Proactive Remediation

Administrators using Intune Proactive Remediation will find detection and remediation scripts to make these changes published on GitHub.

Detect-RsaePss.ps1

Remediate-RsaePss.ps1

Additional Information

Windows TPM 2.0 Client Authentication in TLS 1.2 with RSA PSS

Always On VPN NPS Auditing and Logging

Always On VPN NPS RADIUS Configuration Missing

Always On VPN NPS Load Balancing