Always On VPN Connection Issues After Sleep or Hibernate

Always On VPN Connection Issues After Sleep or HibernateLikely the single most common complaint about Windows 10 Always On VPN is that device tunnel or user tunnel VPN connections fail to reconnect automatically after a laptop computer wakes from sleep or hibernate. You will find many complaining about this issue and discussing various attempts at resolution on the Microsoft forums. And while Microsoft has released many fixes the last few years to improve connection reliability for Always On VPN, this one seems to continue to plague them. This issue is also prevalent with DirectAccess deployments.

Fix or Workaround?

Unfortunately, I do not have a specific fix or workaround to share that will magically resolve this ongoing issue. However, there are a few group policy settings that may prove effective in some cases.

Connected Standby Settings

To help address issues with Always On VPN connections failing after sleep or hibernate, open the group policy management console and navigate to Computer Configuration > Administrative Templates > System > Power Management > Sleep Settings and enable the following settings.

  • Allow network connectivity during connected-standby (plugged in)
  • Allow network connectivity during connected-standby (on battery)

Always On VPN Connection Issues After Sleep or Hibernate

Always On VPN Connection Issues After Sleep or Hibernate

Additional Information

Are you experiencing issues with Always On VPN reconnecting automatically after sleep or hibernate? Have you found an effective workaround? Share your experience in the comments below!

Always On VPN Trusted Network Detection

Always On VPN Trusted Network DetectionWhen deploying Windows 10 Always On VPN, administrators can configure Trusted Network Detection (TND) which enables clients to detect when they are on the internal network. With this option set, the client will only automatically establish a VPN connection when it is outside the trusted network. Trusted network detection can be configured on both device tunnel and user tunnel connections.

TND Operation

When trusted network detection is configured, the VPN client will evaluate the DNS suffix assigned to all physical (non-virtual or tunnel) adapters that are active. If any of them match the administrator-defined trusted network setting, the client is determined to be on the internal network and the VPN connection will not connect. If the DNS suffix is not present on any of these adapters, the client is determined to be outside the internal network and the VPN connection will establish automatically.

TND Configuration

Trusted network detection is defined in the Intune UI or in ProfileXML as a string that matches the DNS suffix assigned to clients on the internal network. In this example, the DNS suffix on the internal network is lab.richardhicks.net.

Always On VPN Trusted Network Detection

Note: Your organization might have more than one DNS suffix. Ensure that the trusted network detection configuration includes all DNS suffixes in use in the environment to ensure reliable operation.

Intune

Follow the steps below to configured trusted network detection in Microsoft Intune.

  1. Open the Intune management portal (https://devicemanagement.microsoft.com/).
  2. Navigate to Devices > Configuration Profiles > [Profile Name] > Properties > Settings.
  3. Click on Trusted Network Detection.
  4. Enter the DNS suffix(es) used on the internal network.

Always On VPN Trusted Network Detection

ProfileXML

To define Trusted Network Detection in ProfileXML, add the TrustedNetworkDetection element as follows.

Always On VPN Trusted Network Detection

Caveats

In some instances, an Always On VPN client connection may persist, even if the client is connected to the internal network. A common scenario is when a client device connects to a Wi-Fi network that is not connected to the corporate network (for example guest Wi-Fi), then connects to the internal network with Ethernet via a docking station. If the Wi-Fi connection is still available, the Always On VPN connection will persist, even though the machine is connected to the internal network. This is expected and by design.

Workaround

To address this specific scenario, administrators can implement changes via group policy to the way Windows handles multiple connections to the same network. For example, beginning with Windows 10 1709, group policy can be configured to ensure that Windows 10 clients prefer wired Ethernet network connections over Wi-Fi, and to ensure that Wi-Fi connections disconnect when an Ethernet connection is detected.

GPO Configuration

Open the Group Policy management console (gpmc.msc) and perform the following steps to create the required group policy objects.

  1. Create a new Group Policy Object (GPO).
  2. Right-click the new GPO and choose Edit.
  3. Expand Computer Configuration > Administrative Templates > Network > Windows Connection Manager.
  4. Double-click the policy Minimize the number of simultaneous connections to the Internet or a Windows Domain.
  5. Select Enabled.
  6. From the Minimize Policy Options drop-down list choose 1 = Minimize simultaneous connections. Optionally you can choose to disable Wi-Fi whenever connected to Ethernet by choosing 3 = Prevent Wi-Fi when on Ethernet.
  7. Click Ok.Always On VPN Trusted Network Detection
  8. Double-click the policy Enable Windows to soft-disconnect a computer from a network.
  9. Select Disabled.
  10. Click Ok.Always On VPN Trusted Network Detection

Additional Information

Understanding and Configuring Windows Connection Manager

Always On VPN RasMan Errors in Windows 10 1903

Always On VPN RasMan Errors in Windows 10 1903After deploying or upgrading to Windows 10 1903, administrators may find that Windows 10 Always On VPN connections fail to establish successfully. Always On VPN connections continue to work for Windows 10 1809 and earlier clients, however.

Important Note: The issue described in this article has been addressed in KB4505903 (build 18362.267) released July 26, 2019.

RasMan Event Log Errors

When this occurs, the application event log contains an error with Event ID 1000 that includes the following information.

“Faulting application name: svchost.exe_RasMan…”, “Faulting module name: rasmans.dll”, and “Exception code: 0xc0000005”

Always On VPN RasMan Errors in Windows 10 1903 Administrators may find that Windows 10 Always On VPN connections fail after deploying or upgrading to Windows 10 1903. Always On VPN connections continue to work for Windows 10 1809 and earlier clients. RasMan Event Log Errors When this occurs, the application event log contains an error with Event ID 1000 that includes the following information. “Faulting application name: svchost.exe_RasMan…”, “Faulting module name: rasmans.dll”, and “Exception code: 0xc0000005” Root Cause RasMan failures can occur in Windows 10 1903 clients when telemetry is disabled via group policy or the registry. Microsoft has identified the issue and is currently working on a fix. Workaround As a temporary workaround to restore Always On VPN connectivity, enable telemetry on Windows 10 1903 using Active Directory or local group policy, the local registry, or PowerShell. Group Policy Create a new GPO or edit an existing one by opening the group policy management console (gpmc.msc) and performing the following steps. 1. Expand Computer Configuration > Administrative Templates > Windows Components > Data Collection and Preview Builds 2. Double-Click Allow Telemetry. 3. Select Enabled. 4. Choose 1-Basic, 2-Enhanced, or 3-Full (do not select 0-Security). 5. Click Ok. Registry Telemetry can also be enabled locally by opening the registry editor (regedit.exe) and modifying the following registry setting. HKLM\SOFTWARE\Policies\Microsoft\Windows\DataCollection\AllowTelemetry DWORD = 1 Note: The AllowTelemetry value can be removed entirely, if desired. PowerShell PowerShell can also be used modify or remove the AllowTelemetry value on Windows 10 1903 clients. Run the following PowerShell command to update the AllowTelemetry setting. New-ItemProperty -Path 'HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\' -Name AllowTelemetry -PropertyType DWORD -Value 1 -Force Optionally, run the following PowerShell command to remove the AllowTelemetry setting entirely. Remove-ItemProperty -Path 'HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\' -Name AllowTelemetry Restart Required Once these changes have been made, restart the client and test the Always On VPN connection. Additional Information asdf

Root Cause

RasMan failures can occur in Windows 10 1903 clients when telemetry is disabled via group policy or the registry. Microsoft has identified the issue and is currently working on a fix.

Workaround

As a temporary workaround to restore Always On VPN connectivity, enable telemetry on Windows 10 1903 using Active Directory or local group policy, the local registry, or PowerShell.

Group Policy

Create a new GPO or edit an existing one by opening the group policy management console (gpmc.msc) and performing the following steps.

1. Expand Computer Configuration > Administrative Templates > Windows Components > Data Collection and Preview Builds
2. Double-click Allow Telemetry.
3. Select Enabled.
4. Choose 1-Basic, 2-Enhanced, or 3-Full (do not select 0-Security).
5. Click Ok.

Always On VPN RasMan Errors in Windows 10 1903 Administrators may find that Windows 10 Always On VPN connections fail after deploying or upgrading to Windows 10 1903. Always On VPN connections continue to work for Windows 10 1809 and earlier clients. RasMan Event Log Errors When this occurs, the application event log contains an error with Event ID 1000 that includes the following information. “Faulting application name: svchost.exe_RasMan…”, “Faulting module name: rasmans.dll”, and “Exception code: 0xc0000005” Root Cause RasMan failures can occur in Windows 10 1903 clients when telemetry is disabled via group policy or the registry. Microsoft has identified the issue and is currently working on a fix. Workaround As a temporary workaround to restore Always On VPN connectivity, enable telemetry on Windows 10 1903 using Active Directory or local group policy, the local registry, or PowerShell. Group Policy Create a new GPO or edit an existing one by opening the group policy management console (gpmc.msc) and performing the following steps. 1. Expand Computer Configuration > Administrative Templates > Windows Components > Data Collection and Preview Builds 2. Double-Click Allow Telemetry. 3. Select Enabled. 4. Choose 1-Basic, 2-Enhanced, or 3-Full (do not select 0-Security). 5. Click Ok. Registry Telemetry can also be enabled locally by opening the registry editor (regedit.exe) and modifying the following registry setting. HKLM\SOFTWARE\Policies\Microsoft\Windows\DataCollection\AllowTelemetry DWORD = 1 Note: The AllowTelemetry value can be removed entirely, if desired. PowerShell PowerShell can also be used modify or remove the AllowTelemetry value on Windows 10 1903 clients. Run the following PowerShell command to update the AllowTelemetry setting. New-ItemProperty -Path 'HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\' -Name AllowTelemetry -PropertyType DWORD -Value 1 -Force Optionally, run the following PowerShell command to remove the AllowTelemetry setting entirely. Remove-ItemProperty -Path 'HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\' -Name AllowTelemetry Restart Required Once these changes have been made, restart the client and test the Always On VPN connection. Additional Information asdf

Registry

Telemetry can also be enabled locally by opening the registry editor (regedit.exe) and modifying the following registry setting.

HKLM\SOFTWARE\Policies\Microsoft\Windows\DataCollection\AllowTelemetry DWORD = 1

Always On VPN RasMan Errors in Windows 10 1903 Administrators may find that Windows 10 Always On VPN connections fail after deploying or upgrading to Windows 10 1903. Always On VPN connections continue to work for Windows 10 1809 and earlier clients. RasMan Event Log Errors When this occurs, the application event log contains an error with Event ID 1000 that includes the following information. “Faulting application name: svchost.exe_RasMan…”, “Faulting module name: rasmans.dll”, and “Exception code: 0xc0000005” Root Cause RasMan failures can occur in Windows 10 1903 clients when telemetry is disabled via group policy or the registry. Microsoft has identified the issue and is currently working on a fix. Workaround As a temporary workaround to restore Always On VPN connectivity, enable telemetry on Windows 10 1903 using Active Directory or local group policy, the local registry, or PowerShell. Group Policy Create a new GPO or edit an existing one by opening the group policy management console (gpmc.msc) and performing the following steps. 1. Expand Computer Configuration > Administrative Templates > Windows Components > Data Collection and Preview Builds 2. Double-Click Allow Telemetry. 3. Select Enabled. 4. Choose 1-Basic, 2-Enhanced, or 3-Full (do not select 0-Security). 5. Click Ok. Registry Telemetry can also be enabled locally by opening the registry editor (regedit.exe) and modifying the following registry setting. HKLM\SOFTWARE\Policies\Microsoft\Windows\DataCollection\AllowTelemetry DWORD = 1 Note: The AllowTelemetry value can be removed entirely, if desired. PowerShell PowerShell can also be used modify or remove the AllowTelemetry value on Windows 10 1903 clients. Run the following PowerShell command to update the AllowTelemetry setting. New-ItemProperty -Path 'HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\' -Name AllowTelemetry -PropertyType DWORD -Value 1 -Force Optionally, run the following PowerShell command to remove the AllowTelemetry setting entirely. Remove-ItemProperty -Path 'HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\' -Name AllowTelemetry Restart Required Once these changes have been made, restart the client and test the Always On VPN connection. Additional Information asdf

Note: The AllowTelemetry value can be removed entirely, if desired.

PowerShell

PowerShell can also be used modify or remove the AllowTelemetry value on Windows 10 1903 clients. Run the following PowerShell command to update the AllowTelemetry setting.

New-ItemProperty -Path ‘HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\’ -Name AllowTelemetry -PropertyType DWORD -Value 1 -Force

Optionally, run the following PowerShell command to remove the AllowTelemetry setting entirely.

Remove-ItemProperty -Path ‘HKLM:\SOFTWARE\Policies\Microsoft\Windows\DataCollection\’ -Name AllowTelemetry

Service Restart Required

Once these changes have been made, restart the Remote Access Connection Manager service (RasMan) using the Services mnagement console (services.msc) or by running the following PowerShell command.

Restart-Service RasMan -PassThru

Optionally, the client can be rebooted to apply these changes.

Additional Information

Windows 10 1903 Known Issues

 

%d bloggers like this: