Microsoft Intune NDES Connector Error 0x80004003

Microsoft Intune NDES Connector Error 0x80004003To support certificate deployment for non-domain Windows 10 Always On VPN clients, a Windows Server with the Network Device Enrollment Service (NDES) role can be provisioned on-premises. In addition, the Microsoft Intune Connector must be installed and configured on the NDES server to allow Intune-managed clients to request and receive certificates from the on-premises Certification Authority (CA) server.

Connection Status Error

After installing the Microsoft Intune Connector, the administrator may encounter the following error message.

“An error occurred while connecting to the Intune Service. Error code is 0x80004003. The NDES Connector will retry the connection as soon as possible.”

 Microsoft Intune NDES Connector Error 0x80004003

IE Enhanced Security Configuration

This error can occur if Internet Explorer Enhanced Security Configuration (ESC) is enabled. To resolve this issue, disable ESC for administrators and users by opening the Server Manager on the NDES server and performing the following steps.

1. In the navigation pane click Local Server.
2. Click the On link next to IE Enhanced Security Configuration.
3. Click Off in the Administrators section.
4. Click Off in the Users section
5. Click Ok.

Microsoft Intune NDES Connector Error 0x80004003

Once complete, restart the NDES Connector service using the following PowerShell command.

Restart-Service NDESConnectorSvc -PassThru

Additional Configuration

Microsoft Intune NDES Connector Setup Wizard Ended Prematurely

Microsoft Intune NDES Connector Setup Wizard Ended Prematurely

Microsoft Intune NDES Connector Setup Wizard Ended PrematurelyA Windows Server with the Network Device Enrollment Service (NDES) role can be provisioned on-premises to support certificate deployment for non-domain Windows 10 Always On VPN clients. In addition, the Microsoft Intune Connector must be installed and configured on the NDES server to allow Intune-managed clients to request and receive certificates from the on-premises Certification Authority (CA) server.

Setup Wizard Ended Prematurely

When installing the Microsoft Intune Connector, the administrator may encounter a scenario where the setup wizard fails with the following error message.

“Microsoft Intune Connector Setup Wizard ended prematurely because of an error. Your system has not been modified. To install this program at a later time, run Setup Wizard again. Click the Finish button to exit the Setup Wizard.”

Microsoft Intune NDES Connector Setup Wizard Ended Prematurely

Cryptographic Service Provider

This error can occur if the NDES server certificate template is configured to use the Key Storage Provider cryptography service provider (CSP). When configuring the certificate template for the NDES server, the Legacy Cryptography Service Provider must be used, as shown here.

Microsoft Intune NDES Connector Setup Wizard Ended Prematurely

Additional Information

Deploying Windows 10 Always On VPN with Intune using Custom ProfileXML

Windows 10 Always On VPN Device Tunnel Configuration using Microsoft Intune

Deploying Windows 10 Always On VPN with Microsoft Intune

 

%d bloggers like this: